Re: [PATCH v3 6/8] arm64: dts: renesas: Add EK874 board with idk-2121wr display support

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Wed, Aug 28, 2019 at 07:36:40PM +0100, Fabrizio Castro wrote:
> The EK874 is advertised as compatible with panel IDK-2121WR from
> Advantech, however the panel isn't sold alongside the board.
> A new dts, adding everything that's required to get the panel to
> to work with the EK874, is the most convenient way to support the
> EK874 when it's connected to the IDK-2121WR.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> 
> ---
> v1->v2:
> * Added comment for lvds-connector-en-gpio
> * Renamed &lvds0_panel_in to panel_in0
> * Renamed &lvds1_panel_in to panel_in1
> 
> v2->v3:
> * removed renesas,swap-data property
> * added dual-lvds-odd-pixels and dual-lvds-even-pixels properties
> 
> Geert,
> 
> no need to review this patch unless they like the idea behind this
> series.

I like the idea :-) We still have a few issues to solve, but it should
make it in.

The patch looks sane to me, but I haven't checked if it matches the
hardware, so

Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

(even if this really calls for DT overlays)

> ---
>  arch/arm64/boot/dts/renesas/Makefile               |   3 +-
>  .../boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts | 116 +++++++++++++++++++++
>  2 files changed, 118 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
> 
> diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
> index 42b74c2..ce48478 100644
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -1,7 +1,8 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
>  dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
> -dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
> +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
> +			       r8a774c0-ek874-idk-2121wr.dtb
>  dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
>  dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
>  dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
> diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
> new file mode 100644
> index 0000000..a7b27d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
> @@ -0,0 +1,116 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
> + * connected to an Advantech IDK-2121WR 21.5" LVDS panel
> + *
> + * Copyright (C) 2019 Renesas Electronics Corp.
> + */
> +
> +#include "r8a774c0-ek874.dts"
> +
> +/ {
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm5 0 50000>;
> +
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +
> +		power-supply = <&reg_12p0v>;
> +		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	panel-lvds {
> +		compatible = "advantech,idk-2121wr", "panel-lvds";
> +
> +		width-mm = <476>;
> +		height-mm = <268>;
> +
> +		data-mapping = "vesa-24";
> +
> +		panel-timing {
> +			clock-frequency = <148500000>;
> +			hactive = <1920>;
> +			vactive = <1080>;
> +			hsync-len = <44>;
> +			hfront-porch = <88>;
> +			hback-porch = <148>;
> +			vfront-porch = <4>;
> +			vback-porch = <36>;
> +			vsync-len = <5>;
> +		};
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				dual-lvds-odd-pixels;
> +				panel_in0: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				dual-lvds-even-pixels;
> +				panel_in1: endpoint {
> +					remote-endpoint = <&lvds1_out>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&gpio0 {
> +	/*
> +	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
> +	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
> +	 */
> +	lvds-connector-en-gpio{
> +		gpio-hog;
> +		gpios = <17 GPIO_ACTIVE_HIGH>;
> +		output-low;
> +		line-name = "lvds-connector-en-gpio";
> +	};
> +};
> +
> +&lvds0 {
> +	ports {
> +		port@1 {
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&panel_in0>;
> +			};
> +		};
> +	};
> +};
> +
> +&lvds1 {
> +	status = "okay";
> +
> +	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
> +	clock-names = "fck", "dclkin.0", "extal";
> +
> +	ports {
> +		port@1 {
> +			lvds1_out: endpoint {
> +				remote-endpoint = <&panel_in1>;
> +			};
> +		};
> +	};
> +};
> +
> +&pfc {
> +	pwm5_pins: pwm5 {
> +		groups = "pwm5_a";
> +		function = "pwm5";
> +	};
> +};
> +
> +&pwm5 {
> +	pinctrl-0 = <&pwm5_pins>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +};

-- 
Regards,

Laurent Pinchart