[PATCH 4.14 38/62] net: usb: lan78xx: Connect PHY before registering MAC

[Greg Kroah-Hartman]

From: Andrew Lunn <andrew@xxxxxxx>

[ Upstream commit 38b4fe320119859c11b1dc06f6b4987a16344fa1 ]

As soon as the netdev is registers, the kernel can start using the
interface. If the driver connects the MAC to the PHY after the netdev
is registered, there is a race condition where the interface can be
opened without having the PHY connected.

Change the order to close this race condition.

Fixes: 92571a1aae40 ("lan78xx: Connect phy early")
Reported-by: Daniel Wagner <dwagner@xxxxxxx>
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Tested-by: Daniel Wagner <dwagner@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/usb/lan78xx.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3642,10 +3642,14 @@ static int lan78xx_probe(struct usb_inte
 	/* driver requires remote-wakeup capability during autosuspend. */
 	intf->needs_remote_wakeup = 1;
 
+	ret = lan78xx_phy_init(dev);
+	if (ret < 0)
+		goto out4;
+
 	ret = register_netdev(netdev);
 	if (ret != 0) {
 		netif_err(dev, probe, netdev, "couldn't register the device\n");
-		goto out4;
+		goto out5;
 	}
 
 	usb_set_intfdata(intf, dev);
@@ -3658,14 +3662,10 @@ static int lan78xx_probe(struct usb_inte
 	pm_runtime_set_autosuspend_delay(&udev->dev,
 					 DEFAULT_AUTOSUSPEND_DELAY);
 
-	ret = lan78xx_phy_init(dev);
-	if (ret < 0)
-		goto out5;
-
 	return 0;
 
 out5:
-	unregister_netdev(netdev);
+	phy_disconnect(netdev->phydev);
 out4:
 	usb_free_urb(dev->urb_intr);
 out3: