On Sat, Sep 7, 2019 at 10:48 AM Katsuhiro Suzuki
<katsuhiro@xxxxxxxxxxxxx> wrote:
This patch adds audio codec (Everest ES8316) and I2S audio nodes for
RK3399 RockPro64.
Hi Katsuhiro,
I tested your patch with my rockpro64 on 5.4-rc6 which has your other
patches to es8316 driver, but apparently it doesn't work.
'alsamixer' complains 'cannot load mixer controls: No such device or
address' and if I try to play audio with mpg123 it pretends that it
plays something but there's no sound.
Any idea what can be wrong?
Regards,
Vasily
Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
---
.../boot/dts/rockchip/rk3399-rockpro64.dts | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 0401d4ec1f45..8b1e6382b140 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -81,6 +81,12 @@
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3399";
+ dais = <&i2s1_p0>;
+ };
+
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -470,6 +476,20 @@
i2c-scl-rising-time-ns = <300>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
+
+ es8316: codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s1_p0_0>;
+ };
+ };
+ };
};
&i2c3 {
@@ -505,6 +525,14 @@
rockchip,playback-channels = <2>;
rockchip,capture-channels = <2>;
status = "okay";
+
+ i2s1_p0: port {
+ i2s1_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
};
&i2s2 {
--
2.23.0.rc1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel