arm64: dts: rockchip: Add SDR104 mode to SD-card I/F on rk3399-roc-pc

From: Markus Reichl
Date: Mon Nov 11 2019 - 09:13:37 EST


Add SDR104 capability and regulators to SD card node.
While at it, fix a typo in lcd pinctrl and remove two
undocumented bindings from pmic.

Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
---
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 31 +++++++++++++++----
1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 33df95e384b4..e86a6db54499 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -135,6 +135,20 @@
vin-supply = <&vcc_1v8>;
};

+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v0_sd_en>;
+ regulator-name = "vcc3v0_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
@@ -279,8 +293,6 @@
vcc10-supply = <&vcc3v3_sys>;
vcc11-supply = <&vcc3v3_sys>;
vcc12-supply = <&vcc3v3_sys>;
- vcc13-supply = <&vcc3v3_sys>;
- vcc14-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc_3v0>;

regulators {
@@ -562,7 +574,7 @@

lcd-panel {
lcd_panel_reset: lcd-panel-reset {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

@@ -588,6 +600,10 @@
vsel2_gpio: vsel2-gpio {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
+
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
};

sdio-pwrseq {
@@ -596,9 +612,9 @@
};
};

- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ sdmmc {
+ vcc3v0_sd_en: vcc3v0-sd-en {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};

@@ -653,6 +669,9 @@
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
status = "okay";
--
2.20.1