Re: [PATCH] i2c: i2c-cros-ec-tunnel: Make the device acpi compatible

[Enric Balletbo i Serra]

Hi Akshu,

Thanks for sending this upstream and improve CrOS EC

On 11/11/19 17:14, Akshu Agrawal wrote:
> Add ACPI entry and use device_property_read to get fw value
> which is common to both dtsi and acpi.
> 
> Signed-off-by: Akshu Agrawal <akshu.agrawal@xxxxxxx>
> ---
>  drivers/i2c/busses/i2c-cros-ec-tunnel.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> index c551aa96a2e3..958161c71985 100644
> --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> @@ -3,6 +3,7 @@
>  //
>  // Copyright (C) 2013 Google, Inc.
>  
> +#include <linux/acpi.h>
>  #include <linux/module.h>
>  #include <linux/i2c.h>
>  #include <linux/platform_data/cros_ec_commands.h>
> @@ -240,7 +241,6 @@ static const struct i2c_algorithm ec_i2c_algorithm = {
>  
>  static int ec_i2c_probe(struct platform_device *pdev)
>  {
> -	struct device_node *np = pdev->dev.of_node;
>  	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
>  	struct device *dev = &pdev->dev;
>  	struct ec_i2c_device *bus = NULL;
> @@ -256,7 +256,7 @@ static int ec_i2c_probe(struct platform_device *pdev)
>  	if (bus == NULL)
>  		return -ENOMEM;
>  
> -	err = of_property_read_u32(np, "google,remote-bus", &remote_bus);
> +	err = device_property_read_u32(dev, "google,remote-bus", &remote_bus);
>  	if (err) {
>  		dev_err(dev, "Couldn't read remote-bus property\n");
>  		return err;
> @@ -271,7 +271,7 @@ static int ec_i2c_probe(struct platform_device *pdev)
>  	bus->adap.algo = &ec_i2c_algorithm;
>  	bus->adap.algo_data = bus;
>  	bus->adap.dev.parent = &pdev->dev;
> -	bus->adap.dev.of_node = np;
> +	bus->adap.dev.of_node = pdev->dev.of_node;

That change is not really needed/(related) but as np was only used here I'm fine
with it.

>  	bus->adap.retries = I2C_MAX_RETRIES;
>  
>  	err = i2c_add_adapter(&bus->adap);
> @@ -291,19 +291,24 @@ static int ec_i2c_remove(struct platform_device *dev)
>  	return 0;
>  }
>  
> -#ifdef CONFIG_OF
>  static const struct of_device_id cros_ec_i2c_of_match[] = {
>  	{ .compatible = "google,cros-ec-i2c-tunnel" },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
> -#endif
> +
> +static const struct acpi_device_id cros_ec_i2c_tunnel_acpi_id[] = {
> +	{ "GOOG001A", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_tunnel_acpi_id);
>  
>  static struct platform_driver ec_i2c_tunnel_driver = {
>  	.probe = ec_i2c_probe,
>  	.remove = ec_i2c_remove,
>  	.driver = {
>  		.name = "cros-ec-i2c-tunnel",
> +		.acpi_match_table = ACPI_PTR(cros_ec_i2c_tunnel_acpi_id),
>  		.of_match_table = of_match_ptr(cros_ec_i2c_of_match),
>  	},
>  };
> 

Reviewed-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>

Question: Is this supported on older firmwares or is only expected to work on
newer ACPI-based devices?

Thanks,
 Enric