[PATCH 4.14 076/105] scsi: lpfc: Honor module parameter lpfc_use_adisc
From: Greg Kroah-Hartman
Date: Mon Nov 11 2019 - 13:38:28 EST
From: Daniel Wagner <dwagner@xxxxxxx>
[ Upstream commit 0fd103ccfe6a06e40e2d9d8c91d96332cc9e1239 ]
The initial lpfc_desc_set_adisc implementation in commit
dea3101e0a5c ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if
cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE
In commit 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of
SLI-3") this changed to
(cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE
and later in commit ffc954936b13 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes
and enhancements.") to
(cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET)
A customer reports that after a devloss, an ADISC failure is logged. It
turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc
= 0.
[Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa
[Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000
[mkp: fixed Hannes' email]
Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Cc: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Cc: James Smart <james.smart@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20191022072112.132268-1-dwagner@xxxxxxx
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Reviewed-by: James Smart <james.smart@xxxxxxxxxxxx>
Signed-off-by: Daniel Wagner <dwagner@xxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 36fb549eb4e86..a0658d1582287 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -809,9 +809,9 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
if (!(vport->fc_flag & FC_PT2PT)) {
/* Check config parameter use-adisc or FCP-2 */
- if ((vport->cfg_use_adisc && (vport->fc_flag & FC_RSCN_MODE)) ||
+ if (vport->cfg_use_adisc && ((vport->fc_flag & FC_RSCN_MODE) ||
((ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) &&
- (ndlp->nlp_type & NLP_FCP_TARGET))) {
+ (ndlp->nlp_type & NLP_FCP_TARGET)))) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
--
2.20.1