[PATCH 5.3 059/193] iio: srf04: fix wrong limitation in distance measuring

[Greg Kroah-Hartman]

From: Andreas Klinger <ak@xxxxxxxxxxxxx>

commit 431f7667bd6889a274913162dfd19cce9d84848e upstream.

The measured time value in the driver is limited to the maximum distance
which can be read by the sensor. This limitation was wrong and is fixed
by this patch.

It also takes into account that we are supporting a variety of sensors
today and that the recently added sensors have a higher maximum
distance range.

Changes in v2:
- Added a Tested-by

Suggested-by: ZbynÄk Kocur <zbynek.kocur@xxxxxxxxxxx>
Tested-by: ZbynÄk Kocur <zbynek.kocur@xxxxxxxxxxx>
Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx>
Cc:<Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/iio/proximity/srf04.c |   29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

--- a/drivers/iio/proximity/srf04.c
+++ b/drivers/iio/proximity/srf04.c
@@ -110,7 +110,7 @@ static int srf04_read(struct srf04_data
 	udelay(data->cfg->trigger_pulse_us);
 	gpiod_set_value(data->gpiod_trig, 0);
 
-	/* it cannot take more than 20 ms */
+	/* it should not take more than 20 ms until echo is rising */
 	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
 	if (ret < 0) {
 		mutex_unlock(&data->lock);
@@ -120,7 +120,8 @@ static int srf04_read(struct srf04_data
 		return -ETIMEDOUT;
 	}
 
-	ret = wait_for_completion_killable_timeout(&data->falling, HZ/50);
+	/* it cannot take more than 50 ms until echo is falling */
+	ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
 	if (ret < 0) {
 		mutex_unlock(&data->lock);
 		return ret;
@@ -135,19 +136,19 @@ static int srf04_read(struct srf04_data
 
 	dt_ns = ktime_to_ns(ktime_dt);
 	/*
-	 * measuring more than 3 meters is beyond the capabilities of
-	 * the sensor
+	 * measuring more than 6,45 meters is beyond the capabilities of
+	 * the supported sensors
 	 * ==> filter out invalid results for not measuring echos of
 	 *     another us sensor
 	 *
 	 * formula:
-	 *         distance       3 m
-	 * time = ---------- = --------- = 9404389 ns
-	 *          speed       319 m/s
+	 *         distance     6,45 * 2 m
+	 * time = ---------- = ------------ = 40438871 ns
+	 *          speed         319 m/s
 	 *
 	 * using a minimum speed at -20 ÂC of 319 m/s
 	 */
-	if (dt_ns > 9404389)
+	if (dt_ns > 40438871)
 		return -EIO;
 
 	time_ns = dt_ns;
@@ -159,20 +160,20 @@ static int srf04_read(struct srf04_data
 	 *   with Temp in ÂC
 	 *   and speed in m/s
 	 *
-	 * use 343 m/s as ultrasonic speed at 20 ÂC here in absence of the
+	 * use 343,5 m/s as ultrasonic speed at 20 ÂC here in absence of the
 	 * temperature
 	 *
 	 * therefore:
-	 *             time     343
-	 * distance = ------ * -----
-	 *             10^6       2
+	 *             time     343,5     time * 106
+	 * distance = ------ * ------- = ------------
+	 *             10^6         2         617176
 	 *   with time in ns
 	 *   and distance in mm (one way)
 	 *
-	 * because we limit to 3 meters the multiplication with 343 just
+	 * because we limit to 6,45 meters the multiplication with 106 just
 	 * fits into 32 bit
 	 */
-	distance_mm = time_ns * 343 / 2000000;
+	distance_mm = time_ns * 106 / 617176;
 
 	return distance_mm;
 }