Re: [PATCH v8 1/4] dt-bindings: clock: Document external clocks for MSM8998 gcc

[Rob Herring]

On Fri, Nov 08, 2019 at 04:17:16PM -0700, Jeffrey Hugo wrote:
> The global clock controller on MSM8998 can consume a number of external
> clocks.  Document them.
> 
> Signed-off-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/clock/qcom,gcc.yaml        | 47 +++++++++++++++-------
>  1 file changed, 33 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> index e73a56f..2f3512b 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -40,20 +40,38 @@ properties:
>         - qcom,gcc-sm8150
>  
>    clocks:
> -    minItems: 1

1 or 2 clocks are no longer allowed?

> -    maxItems: 3
> -    items:
> -      - description: Board XO source
> -      - description: Board active XO source
> -      - description: Sleep clock source
> +    oneOf:
> +      #qcom,gcc-sm8150
> +      #qcom,gcc-sc7180

Typically, this would be an if/then schema, but I'm okay with leaving it 
like this. Depends whether you want to check the clocks match the 
compatible.

> +      - items:
> +        - description: Board XO source
> +        - description: Board active XO source
> +        - description: Sleep clock source
> +      #qcom,gcc-msm8998
> +      - items:
> +        - description: Board XO source
> +        - description: USB 3.0 phy pipe clock
> +        - description: UFS phy rx symbol clock for pipe 0
> +        - description: UFS phy rx symbol clock for pipe 1
> +        - description: UFS phy tx symbol clock
> +        - description: PCIE phy pipe clock
>  
>    clock-names:
> -    minItems: 1
> -    maxItems: 3
> -    items:
> -      - const: bi_tcxo
> -      - const: bi_tcxo_ao
> -      - const: sleep_clk
> +    oneOf:
> +      #qcom,gcc-sm8150
> +      #qcom,gcc-sc7180
> +      - items:
> +        - const: bi_tcxo
> +        - const: bi_tcxo_ao
> +        - const: sleep_clk
> +      #qcom,gcc-msm8998
> +      - items:
> +        - const: xo
> +        - const: usb3_pipe
> +        - const: ufs_rx_symbol0
> +        - const: ufs_rx_symbol1
> +        - const: ufs_tx_symbol0
> +        - const: pcie0_pipe
>  
>    '#clock-cells':
>      const: 1
> @@ -118,6 +136,7 @@ else:
>        compatible:
>          contains:
>            enum:
> +            - qcom,gcc-msm8998
>              - qcom,gcc-sm8150
>              - qcom,gcc-sc7180
>    then:
> @@ -179,8 +198,8 @@ examples:
>      clock-controller@100000 {
>        compatible = "qcom,gcc-sc7180";
>        reg = <0x100000 0x1f0000>;
> -      clocks = <&rpmhcc 0>, <&rpmhcc 1>;
> -      clock-names = "bi_tcxo", "bi_tcxo_ao";
> +      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <0>;
> +      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";

The patch subject says 8998, but this is changing sc7180. 

>        #clock-cells = <1>;
>        #reset-cells = <1>;
>        #power-domain-cells = <1>;
> -- 
> Qualcomm Technologies, Inc. is a member of the
> Code Aurora Forum, a Linux Foundation Collaborative Project.
>