Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64
From: Katsuhiro Suzuki
Date: Tue Nov 12 2019 - 00:35:15 EST
Hello Vasily,
Thank you for valuable information.
On 2019/11/12 4:25, Vasily Khoruzhick wrote:
On Sun, Nov 10, 2019 at 9:40 PM Vasily Khoruzhick <anarsoul@xxxxxxxxx> wrote:
On Sun, Nov 10, 2019 at 7:30 PM Katsuhiro Suzuki
<katsuhiro@xxxxxxxxxxxxx> wrote:
Hello Vasily,
Hi Katsuhiro,
Thanks for response!
Looks like on my board codec sits at address 0x10, and according to
schematics that's what its address is supposed to be.
See http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
Codec address is selected by pin CE of ES8316, and on rockpro64 it
goes to GND through R226. So address should be 0x10.
Yes, I agree. The schematics both v2.0 and v2.1 say that ES8316
address is 0x10. Thank you for pointing.
But I wonder that my RockPro64 behavior is strange, he is in address
0x11. (R226 on my board is broken...??)
root@rockpro64:~# i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
I plan to check R226 resistance value to judge R226 is broken or not
after return to home. And share the result with you.
Please give me a time.
Best Regards,
Katsuhiro Suzuki
Thank you for reporting.
On 2019/11/11 9:17, Vasily Khoruzhick wrote:
On Sat, Sep 7, 2019 at 10:48 AM Katsuhiro Suzuki
<katsuhiro@xxxxxxxxxxxxx> wrote:
This patch adds audio codec (Everest ES8316) and I2S audio nodes for
RK3399 RockPro64.
Hi Katsuhiro,
I tested your patch with my rockpro64 on 5.4-rc6 which has your other
patches to es8316 driver, but apparently it doesn't work.
'alsamixer' complains 'cannot load mixer controls: No such device or
address' and if I try to play audio with mpg123 it pretends that it
plays something but there's no sound.
Any idea what can be wrong?
Do you use defconfig? If so I guess we need turn on more configs:
- simple-graph-card driver (CONFIG_SND_AUDIO_GRAPH_CARD)
- ES8316 (SND_SOC_ES8316)
I have these enabled, card is present in /proc/asound/cards, but
alsamixer doesn't work with it.
FYI) ASoC related status or logs in my environment as follows:
root@rockpro64:~# uname -a
Linux rockpro64 5.4.0-rc6-next-20191108 #169 SMP PREEMPT Mon Nov 11 12:21:44 JST 2019 aarch64 GNU/Linux
I'm running 5.4.0-rc6 (commit
00aff6836241ae5654895dcea10e6d4fc5878ca6) with your patch "arm64: dts:
rockchip: add analog audio nodes on rk3399-rockpro64" on top of it.
root@rockpro64:~# dmesg | grep -i asoc
[ 21.509903] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 21.510550] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
[ 21.567906] asoc-audio-graph-card sound: ES8316 HiFi <-> ff890000.i2s mapping ok
[ 21.568565] asoc-audio-graph-card sound: ASoC: no DMI vendor name!
Similar here:
[vasilykh@rockpro64 ~]$ dmesg | grep -i asoc
[ 15.627685] asoc-audio-graph-card sound: ES8316 HiFi <->
ff890000.i2s mapping ok
[ 16.250196] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
root@rockpro64:~# cat /proc/asound/pcm
00-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi i2s-hifi-0 : playback 1
01-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : playback 1 : capture 1
Same here:
[vasilykh@rockpro64 ~]$ cat /proc/asound/pcm
00-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316
HiFi ES8316 HiFi-0 : playback 1 : capture 1
01-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi
i2s-hifi-0 : playback
root@rockpro64:~# cat /sys/kernel/debug/asoc/components
hdmi-audio-codec.3.auto
ff8a0000.i2s
ff8a0000.i2s
ff890000.i2s
ff890000.i2s
ff880000.i2s
ff880000.i2s
es8316.1-0011
snd-soc-dummy
snd-soc-dummy
Same here.
root@rockpro64:~# cat /sys/kernel/debug/asoc/dais
i2s-hifi
ff8a0000.i2s
ff890000.i2s
ff880000.i2s
ES8316 HiFi
snd-soc-dummy-dai
Same here.
Yet alsamixer doesn't work for me. It terminates with 'cannot load
mixer controls: No such device or address'. Strace shows that fails
here:
openat(AT_FDCWD, "/dev/snd/controlC0", O_RDWR|O_CLOEXEC) = 3
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
ioctl(3, SNDRV_CTL_IOCTL_PVERSION, 0xfffffd3ad04c) = 0
fcntl(3, F_GETFL) = 0x20002 (flags O_RDWR|O_LARGEFILE)
fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK|O_LARGEFILE) = 0
ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
ioctl(3, SNDRV_CTL_IOCTL_ELEM_INFO, 0xfffffd3ace38) = 0
ioctl(3, SNDRV_CTL_IOCTL_ELEM_READ, 0xfffffd3ac160) = -1 ENXIO (No
such device or address)
Looks like it fails to talk to the codec?
mpg123 thinks that it's playing audio, but my headphones connected to
3.5mm output are silent.
Regards,
Vasily
Best Regards,
Katsuhiro Suzuki
Regards,
Vasily
Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
---
.../boot/dts/rockchip/rk3399-rockpro64.dts | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 0401d4ec1f45..8b1e6382b140 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -81,6 +81,12 @@
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3399";
+ dais = <&i2s1_p0>;
+ };
+
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -470,6 +476,20 @@
i2c-scl-rising-time-ns = <300>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
+
+ es8316: codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s1_p0_0>;
+ };
+ };
+ };
};
&i2c3 {
@@ -505,6 +525,14 @@
rockchip,playback-channels = <2>;
rockchip,capture-channels = <2>;
status = "okay";
+
+ i2s1_p0: port {
+ i2s1_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
};
&i2s2 {
--
2.23.0.rc1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel