Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64

From: Vasily Khoruzhick
Date: Tue Nov 12 2019 - 00:49:58 EST

Next message: Ravi Bangoria: "[PATCH] perf report: Fix segfault with '-F phys_daddr'"
Previous message: Naresh Kamboju: "Re: [PATCH 4.19 000/125] 4.19.84-stable review"
In reply to: Vasily Khoruzhick: "Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64"
Next in thread: Katsuhiro Suzuki: "Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Nov 11, 2019 at 9:43 PM Vasily Khoruzhick <anarsoul@xxxxxxxxx> wrote:
>
> On Mon, Nov 11, 2019 at 9:34 PM Katsuhiro Suzuki
> <katsuhiro@xxxxxxxxxxxxx> wrote:
> >
> > Hello Vasily,
> >
> > Thank you for valuable information.
> >
> > On 2019/11/12 4:25, Vasily Khoruzhick wrote:
> > > On Sun, Nov 10, 2019 at 9:40 PM Vasily Khoruzhick <anarsoul@xxxxxxxxx> wrote:
> > >>
> > >> On Sun, Nov 10, 2019 at 7:30 PM Katsuhiro Suzuki
> > >> <katsuhiro@xxxxxxxxxxxxx> wrote:
> > >>>
> > >>> Hello Vasily,
> > >>
> > >> Hi Katsuhiro,
> > >>
> > >> Thanks for response!
> > >
> > > Looks like on my board codec sits at address 0x10, and according to
> > > schematics that's what its address is supposed to be.
> > >
> > > See http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
> > >
> > > Codec address is selected by pin CE of ES8316, and on rockpro64 it
> > > goes to GND through R226. So address should be 0x10.
> > >
> >
> > Yes, I agree. The schematics both v2.0 and v2.1 say that ES8316
> > address is 0x10. Thank you for pointing.
> >
> > But I wonder that my RockPro64 behavior is strange, he is in address
> > 0x11. (R226 on my board is broken...??)
> >
> > root@rockpro64:~# i2cdetect 1
> > WARNING! This program can confuse your I2C bus, cause data loss and worse!
> > I will probe file /dev/i2c-1.
> > I will probe address range 0x03-0x77.
> > Continue? [Y/n] y
> > 0 1 2 3 4 5 6 7 8 9 a b c d e f
> > 00: -- -- -- -- -- -- -- -- -- -- -- -- --
> > 10: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
> > 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> > 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> > 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> > 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> > 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> > 70: -- -- -- -- -- -- -- --
> >
> > I plan to check R226 resistance value to judge R226 is broken or not
> > after return to home. And share the result with you.
> > Please give me a time.
>
> Thanks for confirming that on your board it's on address 0x11. I
> checked with some other rockpro64 owners and they have it on 0x10, but
> looks like we have boards with codec on different address in the wild.

Another datapoint is that my board is 2.0. If yours is 2.1 it can be a
difference between 2.0 and 2.1.

> > Best Regards,
> > Katsuhiro Suzuki
> >
> >
> > >>> Thank you for reporting.
> > >>>
> > >>> On 2019/11/11 9:17, Vasily Khoruzhick wrote:
> > >>>> On Sat, Sep 7, 2019 at 10:48 AM Katsuhiro Suzuki
> > >>>> <katsuhiro@xxxxxxxxxxxxx> wrote:
> > >>>>>
> > >>>>> This patch adds audio codec (Everest ES8316) and I2S audio nodes for
> > >>>>> RK3399 RockPro64.
> > >>>>
> > >>>> Hi Katsuhiro,
> > >>>>
> > >>>> I tested your patch with my rockpro64 on 5.4-rc6 which has your other
> > >>>> patches to es8316 driver, but apparently it doesn't work.
> > >>>>
> > >>>> 'alsamixer' complains 'cannot load mixer controls: No such device or
> > >>>> address' and if I try to play audio with mpg123 it pretends that it
> > >>>> plays something but there's no sound.
> > >>>>
> > >>>> Any idea what can be wrong?
> > >>>>
> > >>>
> > >>> Do you use defconfig? If so I guess we need turn on more configs:
> > >>>
> > >>> - simple-graph-card driver (CONFIG_SND_AUDIO_GRAPH_CARD)
> > >>> - ES8316 (SND_SOC_ES8316)
> > >>
> > >> I have these enabled, card is present in /proc/asound/cards, but
> > >> alsamixer doesn't work with it.
> > >>
> > >>> FYI) ASoC related status or logs in my environment as follows:
> > >>>
> > >>> root@rockpro64:~# uname -a
> > >>> Linux rockpro64 5.4.0-rc6-next-20191108 #169 SMP PREEMPT Mon Nov 11 12:21:44 JST 2019 aarch64 GNU/Linux
> > >>
> > >> I'm running 5.4.0-rc6 (commit
> > >> 00aff6836241ae5654895dcea10e6d4fc5878ca6) with your patch "arm64: dts:
> > >> rockchip: add analog audio nodes on rk3399-rockpro64" on top of it.
> > >>
> > >>> root@rockpro64:~# dmesg | grep -i asoc
> > >>> [ 21.509903] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
> > >>> [ 21.510550] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
> > >>> [ 21.567906] asoc-audio-graph-card sound: ES8316 HiFi <-> ff890000.i2s mapping ok
> > >>> [ 21.568565] asoc-audio-graph-card sound: ASoC: no DMI vendor name!
> > >>
> > >> Similar here:
> > >>
> > >> [vasilykh@rockpro64 ~]$ dmesg | grep -i asoc
> > >> [ 15.627685] asoc-audio-graph-card sound: ES8316 HiFi <->
> > >> ff890000.i2s mapping ok
> > >> [ 16.250196] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
> > >>
> > >>> root@rockpro64:~# cat /proc/asound/pcm
> > >>> 00-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi i2s-hifi-0 : playback 1
> > >>> 01-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : playback 1 : capture 1
> > >>
> > >> Same here:
> > >>
> > >> [vasilykh@rockpro64 ~]$ cat /proc/asound/pcm
> > >> 00-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316
> > >> HiFi ES8316 HiFi-0 : playback 1 : capture 1
> > >> 01-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi
> > >> i2s-hifi-0 : playback
> > >>
> > >>> root@rockpro64:~# cat /sys/kernel/debug/asoc/components
> > >>> hdmi-audio-codec.3.auto
> > >>> ff8a0000.i2s
> > >>> ff8a0000.i2s
> > >>> ff890000.i2s
> > >>> ff890000.i2s
> > >>> ff880000.i2s
> > >>> ff880000.i2s
> > >>> es8316.1-0011
> > >>> snd-soc-dummy
> > >>> snd-soc-dummy
> > >>
> > >> Same here.
> > >>
> > >>> root@rockpro64:~# cat /sys/kernel/debug/asoc/dais
> > >>> i2s-hifi
> > >>> ff8a0000.i2s
> > >>> ff890000.i2s
> > >>> ff880000.i2s
> > >>> ES8316 HiFi
> > >>> snd-soc-dummy-dai
> > >>
> > >> Same here.
> > >>
> > >> Yet alsamixer doesn't work for me. It terminates with 'cannot load
> > >> mixer controls: No such device or address'. Strace shows that fails
> > >> here:
> > >>
> > >> openat(AT_FDCWD, "/dev/snd/controlC0", O_RDWR|O_CLOEXEC) = 3
> > >> fcntl(3, F_SETFD, FD_CLOEXEC) = 0
> > >> ioctl(3, SNDRV_CTL_IOCTL_PVERSION, 0xfffffd3ad04c) = 0
> > >> fcntl(3, F_GETFL) = 0x20002 (flags O_RDWR|O_LARGEFILE)
> > >> fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK|O_LARGEFILE) = 0
> > >> ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
> > >> ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
> > >> ioctl(3, SNDRV_CTL_IOCTL_ELEM_INFO, 0xfffffd3ace38) = 0
> > >> ioctl(3, SNDRV_CTL_IOCTL_ELEM_READ, 0xfffffd3ac160) = -1 ENXIO (No
> > >> such device or address)
> > >>
> > >> Looks like it fails to talk to the codec?
> > >>
> > >> mpg123 thinks that it's playing audio, but my headphones connected to
> > >> 3.5mm output are silent.
> > >>
> > >> Regards,
> > >> Vasily
> > >>
> > >>
> > >>> Best Regards,
> > >>> Katsuhiro Suzuki
> > >>>
> > >>>
> > >>>> Regards,
> > >>>> Vasily
> > >>>>
> > >>>>> Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
> > >>>>> ---
> > >>>>> .../boot/dts/rockchip/rk3399-rockpro64.dts | 28 +++++++++++++++++++
> > >>>>> 1 file changed, 28 insertions(+)
> > >>>>>
> > >>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> > >>>>> index 0401d4ec1f45..8b1e6382b140 100644
> > >>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> > >>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> > >>>>> @@ -81,6 +81,12 @@
> > >>>>> reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> > >>>>> };
> > >>>>>
> > >>>>> + sound {
> > >>>>> + compatible = "audio-graph-card";
> > >>>>> + label = "rockchip,rk3399";
> > >>>>> + dais = <&i2s1_p0>;
> > >>>>> + };
> > >>>>> +
> > >>>>> vcc12v_dcin: vcc12v-dcin {
> > >>>>> compatible = "regulator-fixed";
> > >>>>> regulator-name = "vcc12v_dcin";
> > >>>>> @@ -470,6 +476,20 @@
> > >>>>> i2c-scl-rising-time-ns = <300>;
> > >>>>> i2c-scl-falling-time-ns = <15>;
> > >>>>> status = "okay";
> > >>>>> +
> > >>>>> + es8316: codec@11 {
> > >>>>> + compatible = "everest,es8316";
> > >>>>> + reg = <0x11>;
> > >>>>> + clocks = <&cru SCLK_I2S_8CH_OUT>;
> > >>>>> + clock-names = "mclk";
> > >>>>> + #sound-dai-cells = <0>;
> > >>>>> +
> > >>>>> + port {
> > >>>>> + es8316_p0_0: endpoint {
> > >>>>> + remote-endpoint = <&i2s1_p0_0>;
> > >>>>> + };
> > >>>>> + };
> > >>>>> + };
> > >>>>> };
> > >>>>>
> > >>>>> &i2c3 {
> > >>>>> @@ -505,6 +525,14 @@
> > >>>>> rockchip,playback-channels = <2>;
> > >>>>> rockchip,capture-channels = <2>;
> > >>>>> status = "okay";
> > >>>>> +
> > >>>>> + i2s1_p0: port {
> > >>>>> + i2s1_p0_0: endpoint {
> > >>>>> + dai-format = "i2s";
> > >>>>> + mclk-fs = <256>;
> > >>>>> + remote-endpoint = <&es8316_p0_0>;
> > >>>>> + };
> > >>>>> + };
> > >>>>> };
> > >>>>>
> > >>>>> &i2s2 {
> > >>>>> --
> > >>>>> 2.23.0.rc1
> > >>>>>
> > >>>>>
> > >>>>> _______________________________________________
> > >>>>> linux-arm-kernel mailing list
> > >>>>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > >>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> > >>>>
> > >>>
> > >
> >

Next message: Ravi Bangoria: "[PATCH] perf report: Fix segfault with '-F phys_daddr'"
Previous message: Naresh Kamboju: "Re: [PATCH 4.19 000/125] 4.19.84-stable review"
In reply to: Vasily Khoruzhick: "Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64"
Next in thread: Katsuhiro Suzuki: "Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]