Re: [PATCH] clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value
From: Nicolas.Ferre
Date: Tue Nov 12 2019 - 05:38:50 EST
On 11/11/2019 at 14:28, Eugen Hristev - M18282 wrote:
> From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>
> Product datasheet recommends different values for UPLL and PLLA analog control
> register.
> Adapt accordingly.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Best regards,
Nicolas
> ---
>
> datasheet link http://ww1.microchip.com/downloads/en/DeviceDoc/SAM9X60-Data-Sheet-DS60001579A.pdf
> chapter 57.7.10 optimal setting of the PLLA and PLLUTMI
>
> drivers/clk/at91/clk-sam9x60-pll.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
> index 34b8178..dfb354a 100644
> --- a/drivers/clk/at91/clk-sam9x60-pll.c
> +++ b/drivers/clk/at91/clk-sam9x60-pll.c
> @@ -25,7 +25,8 @@
> #define PMC_PLL_CTRL1_MUL_MSK GENMASK(30, 24)
>
> #define PMC_PLL_ACR 0x18
> -#define PMC_PLL_ACR_DEFAULT 0x1b040010UL
> +#define PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL
> +#define PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL
> #define PMC_PLL_ACR_UTMIVR BIT(12)
> #define PMC_PLL_ACR_UTMIBG BIT(13)
> #define PMC_PLL_ACR_LOOP_FILTER_MSK GENMASK(31, 24)
> @@ -88,7 +89,10 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
> }
>
> /* Recommended value for PMC_PLL_ACR */
> - val = PMC_PLL_ACR_DEFAULT;
> + if (pll->characteristics->upll)
> + val = PMC_PLL_ACR_DEFAULT_UPLL;
> + else
> + val = PMC_PLL_ACR_DEFAULT_PLLA;
> regmap_write(regmap, PMC_PLL_ACR, val);
>
> regmap_write(regmap, PMC_PLL_CTRL1,
>
--
Nicolas Ferre