Re: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)

From: Auger Eric
Date: Tue Nov 12 2019 - 06:28:57 EST

Next message: Aneesh Kumar K.V: "Re: [PATCH 01/16] libnvdimm: Move attribute groups to device type"
Previous message: Chuhong Yuan: "[PATCH net v2] net: fec: add a check for CONFIG_PM to avoid clock count mis-match"
In reply to: Shameerali Kolothum Thodi: "RE: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)"
Next in thread: Shameerali Kolothum Thodi: "RE: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Shameer,
On 11/12/19 12:08 PM, Shameerali Kolothum Thodi wrote:
> Hi Eric,
>
>> -----Original Message-----
>> From: kvmarm-bounces@xxxxxxxxxxxxxxxxxxxxx
>> [mailto:kvmarm-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Eric Auger
>> Sent: 11 July 2019 14:56
>> To: eric.auger.pro@xxxxxxxxx; eric.auger@xxxxxxxxxx;
>> iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>> kvm@xxxxxxxxxxxxxxx; kvmarm@xxxxxxxxxxxxxxxxxxxxx; joro@xxxxxxxxxx;
>> alex.williamson@xxxxxxxxxx; jacob.jun.pan@xxxxxxxxxxxxxxx;
>> yi.l.liu@xxxxxxxxx; jean-philippe.brucker@xxxxxxx; will.deacon@xxxxxxx;
>> robin.murphy@xxxxxxx
>> Cc: kevin.tian@xxxxxxxxx; vincent.stehle@xxxxxxx; ashok.raj@xxxxxxxxx;
>> marc.zyngier@xxxxxxx; tina.zhang@xxxxxxxxx
>> Subject: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)
>>
>> This series brings the VFIO part of HW nested paging support
>> in the SMMUv3.
>>
>> The series depends on:
>> [PATCH v9 00/14] SMMUv3 Nested Stage Setup (IOMMU part)
>> (https://www.spinics.net/lists/kernel/msg3187714.html)
>>
>> 3 new IOCTLs are introduced that allow the userspace to
>> 1) pass the guest stage 1 configuration
>> 2) pass stage 1 MSI bindings
>> 3) invalidate stage 1 related caches
>>
>> They map onto the related new IOMMU API functions.
>>
>> We introduce the capability to register specific interrupt
>> indexes (see [1]). A new DMA_FAULT interrupt index allows to register
>> an eventfd to be signaled whenever a stage 1 related fault
>> is detected at physical level. Also a specific region allows
>> to expose the fault records to the user space.
>
> I am trying to get this running on one of our platform that has smmuv3 dual
> stage support. I am seeing some issues with this when an ixgbe vf dev is
> made pass-through and is behind a vSMMUv3 in Guest.
>
> Kernel used : https://github.com/eauger/linux/tree/v5.3.0-rc0-2stage-v9
> Qemu: https://github.com/eauger/qemu/tree/v4.1.0-rc0-2stage-rfcv5
>
> And this is my Qemu cmd line,
>
> ./qemu-system-aarch64
> -machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 -cpu host \
> -kernel Image \
> -drive if=none,file=ubuntu,id=fs \
> -device virtio-blk-device,drive=fs \
> -device vfio-pci,host=0000:01:10.1 \
> -bios QEMU_EFI.fd \
> -net none \
> -m 4G \
> -nographic -D -d -enable-kvm \
> -append "console=ttyAMA0 root=/dev/vda rw acpi=force"
>
> The basic ping from Guest works fine,
> root@ubuntu:~# ping 10.202.225.185
> PING 10.202.225.185 (10.202.225.185) 56(84) bytes of data.
> 64 bytes from 10.202.225.185: icmp_seq=2 ttl=64 time=0.207 ms
> 64 bytes from 10.202.225.185: icmp_seq=3 ttl=64 time=0.203 ms
> ...
>
> But if I increase ping packet size,
>
> root@ubuntu:~# ping -s 1024 10.202.225.185
> PING 10.202.225.185 (10.202.225.185) 1024(1052) bytes of data.
> 1032 bytes from 10.202.225.185: icmp_seq=22 ttl=64 time=0.292 ms
> 1032 bytes from 10.202.225.185: icmp_seq=23 ttl=64 time=0.207 ms
> From 10.202.225.169 icmp_seq=66 Destination Host Unreachable
> From 10.202.225.169 icmp_seq=67 Destination Host Unreachable
> From 10.202.225.169 icmp_seq=68 Destination Host Unreachable
> From 10.202.225.169 icmp_seq=69 Destination Host Unreachable
>
> And from Host kernel I get,
> [ 819.970742] ixgbe 0000:01:00.1 enp1s0f1: 3 Spoofed packets detected
> [ 824.002707] ixgbe 0000:01:00.1 enp1s0f1: 1 Spoofed packets detected
> [ 828.034683] ixgbe 0000:01:00.1 enp1s0f1: 1 Spoofed packets detected
> [ 830.050673] ixgbe 0000:01:00.1 enp1s0f1: 4 Spoofed packets detected
> [ 832.066659] ixgbe 0000:01:00.1 enp1s0f1: 1 Spoofed packets detected
> [ 834.082640] ixgbe 0000:01:00.1 enp1s0f1: 3 Spoofed packets detected
>
> Also noted that iperf cannot work as it fails to establish the connection with iperf
> server.
>
> Please find attached the trace logs(vfio*, smmuv3*) from Qemu for your reference.
> I haven't debugged this further yet and thought of checking with you if this is
> something you have seen already or not. Or maybe I am missing something here?

Please can you try to edit and modify hw/vfio/common.c, function
vfio_iommu_unmap_notify

/*
if (size <= 0x10000) {
ustruct.info.cache = IOMMU_CACHE_INV_TYPE_IOTLB;
ustruct.info.granularity = IOMMU_INV_GRANU_ADDR;
ustruct.info.addr_info.flags = IOMMU_INV_ADDR_FLAGS_ARCHID;
if (iotlb->leaf) {
ustruct.info.addr_info.flags |= IOMMU_INV_ADDR_FLAGS_LEAF;
}
ustruct.info.addr_info.archid = iotlb->arch_id;
ustruct.info.addr_info.addr = start;
ustruct.info.addr_info.granule_size = size;
ustruct.info.addr_info.nb_granules = 1;
trace_vfio_iommu_addr_inv_iotlb(iotlb->arch_id, start, size, 1,
iotlb->leaf);
} else {
*/
ustruct.info.cache = IOMMU_CACHE_INV_TYPE_IOTLB;
ustruct.info.granularity = IOMMU_INV_GRANU_PASID;
ustruct.info.pasid_info.archid = iotlb->arch_id;
ustruct.info.pasid_info.flags = IOMMU_INV_PASID_FLAGS_ARCHID;
trace_vfio_iommu_asid_inv_iotlb(iotlb->arch_id);
// }

This modification leads to invalidate the whole asid each time we get a
guest TLBI instead of invalidating the single IOVA (TLBI). On my end, I
saw this was the cause of such kind of issues. Please let me know if it
fixes your perf issues and then we may discuss further about the test
configuration.

Thanks

Eric

>
> Please let me know.
>
> Thanks,
> Shameer
>
>> Best Regards
>>
>> Eric
>>
>> This series can be found at:
>> https://github.com/eauger/linux/tree/v5.3.0-rc0-2stage-v9
>>
>> It series includes Tina's patch steming from
>> [1] "[RFC PATCH v2 1/3] vfio: Use capability chains to handle device
>> specific irq" plus patches originally contributed by Yi.
>>
>> History:
>>
>> v8 -> v9:
>> - introduce specific irq framework
>> - single fault region
>> - iommu_unregister_device_fault_handler failure case not handled
>> yet.
>>
>> v7 -> v8:
>> - rebase on top of v5.2-rc1 and especially
>> 8be39a1a04c1 iommu/arm-smmu-v3: Add a master->domain pointer
>> - dynamic alloc of s1_cfg/s2_cfg
>> - __arm_smmu_tlb_inv_asid/s1_range_nosync
>> - check there is no HW MSI regions
>> - asid invalidation using pasid extended struct (change in the uapi)
>> - add s1_live/s2_live checks
>> - move check about support of nested stages in domain finalise
>> - fixes in error reporting according to the discussion with Robin
>> - reordered the patches to have first iommu/smmuv3 patches and then
>> VFIO patches
>>
>> v6 -> v7:
>> - removed device handle from bind/unbind_guest_msi
>> - added "iommu/smmuv3: Nested mode single MSI doorbell per domain
>> enforcement"
>> - added few uapi comments as suggested by Jean, Jacop and Alex
>>
>> v5 -> v6:
>> - Fix compilation issue when CONFIG_IOMMU_API is unset
>>
>> v4 -> v5:
>> - fix bug reported by Vincent: fault handler unregistration now happens in
>> vfio_pci_release
>> - IOMMU_FAULT_PERM_* moved outside of struct definition + small
>> uapi changes suggested by Kean-Philippe (except fetch_addr)
>> - iommu: introduce device fault report API: removed the PRI part.
>> - see individual logs for more details
>> - reset the ste abort flag on detach
>>
>> v3 -> v4:
>> - took into account Alex, jean-Philippe and Robin's comments on v3
>> - rework of the smmuv3 driver integration
>> - add tear down ops for msi binding and PASID table binding
>> - fix S1 fault propagation
>> - put fault reporting patches at the beginning of the series following
>> Jean-Philippe's request
>> - update of the cache invalidate and fault API uapis
>> - VFIO fault reporting rework with 2 separate regions and one mmappable
>> segment for the fault queue
>> - moved to PATCH
>>
>> v2 -> v3:
>> - When registering the S1 MSI binding we now store the device handle. This
>> addresses Robin's comment about discimination of devices beonging to
>> different S1 groups and using different physical MSI doorbells.
>> - Change the fault reporting API: use VFIO_PCI_DMA_FAULT_IRQ_INDEX to
>> set the eventfd and expose the faults through an mmappable fault region
>>
>> v1 -> v2:
>> - Added the fault reporting capability
>> - asid properly passed on invalidation (fix assignment of multiple
>> devices)
>> - see individual change logs for more info
>>
>>
>> Eric Auger (8):
>> vfio: VFIO_IOMMU_SET_MSI_BINDING
>> vfio/pci: Add VFIO_REGION_TYPE_NESTED region type
>> vfio/pci: Register an iommu fault handler
>> vfio/pci: Allow to mmap the fault queue
>> vfio: Add new IRQ for DMA fault reporting
>> vfio/pci: Add framework for custom interrupt indices
>> vfio/pci: Register and allow DMA FAULT IRQ signaling
>> vfio: Document nested stage control
>>
>> Liu, Yi L (2):
>> vfio: VFIO_IOMMU_SET_PASID_TABLE
>> vfio: VFIO_IOMMU_CACHE_INVALIDATE
>>
>> Tina Zhang (1):
>> vfio: Use capability chains to handle device specific irq
>>
>> Documentation/vfio.txt | 77 ++++++++
>> drivers/vfio/pci/vfio_pci.c | 283 ++++++++++++++++++++++++++--
>> drivers/vfio/pci/vfio_pci_intrs.c | 62 ++++++
>> drivers/vfio/pci/vfio_pci_private.h | 24 +++
>> drivers/vfio/pci/vfio_pci_rdwr.c | 45 +++++
>> drivers/vfio/vfio_iommu_type1.c | 166 ++++++++++++++++
>> include/uapi/linux/vfio.h | 109 ++++++++++-
>> 7 files changed, 747 insertions(+), 19 deletions(-)
>>
>> --
>> 2.20.1
>>
>> _______________________________________________
>> kvmarm mailing list
>> kvmarm@xxxxxxxxxxxxxxxxxxxxx
>> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Next message: Aneesh Kumar K.V: "Re: [PATCH 01/16] libnvdimm: Move attribute groups to device type"
Previous message: Chuhong Yuan: "[PATCH net v2] net: fec: add a check for CONFIG_PM to avoid clock count mis-match"
In reply to: Shameerali Kolothum Thodi: "RE: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)"
Next in thread: Shameerali Kolothum Thodi: "RE: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]