[PATCH 0/4] GPIO & Hierarchy IRQ support for HiFive Unleashed

[Yash Shah]

This patch series adds GPIO drivers, DT documentation and DT nodes for
HiFive Unleashed board. The gpio patches are mostly based on Wesley's patch.
The patchset also adds hierarchy irq domain support as it is required by this
gpio driver.

This patchset is based on Linux 5.4-rc6 and tested on HiFive Unleashed board

Changes since RFC version:
Incorporated below changes as suggested by Linus Walleij on RFC version of this
patchset[0]
- Dropped PWM patches as they are already merged.
- Include "GPIO_GENERIC" and "REGMAP_MMIO" in Kconfig select option
- Remove unwanted inclusion of header files
- Use regmap MMIO instead of customised sifive_assign_bit()
- Use GPIOLIB_GENERIC and bgpio_init() to set up the accessors
- Use hierarchical irqdomain

[0] https://lore.kernel.org/linux-riscv/20181010123519.RVexDppaPFpIWl7QU_hpP8tc5qqWPJgeuLYn0FaGbeQ@z/

Yash Shah (4):
  irqchip: sifive: Support hierarchy irq domain
  gpio: sifive: Add DT documentation for SiFive GPIO
  gpio: sifive: Add GPIO driver for SiFive SoCs
  riscv: dts: Add DT support for SiFive FU540 GPIO driver

 .../devicetree/bindings/gpio/gpio-sifive.txt       |  33 +++
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi         |  14 +-
 .../riscv/boot/dts/sifive/hifive-unleashed-a00.dts |   4 +
 drivers/gpio/Kconfig                               |   9 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-sifive.c                         | 255 +++++++++++++++++++++
 drivers/irqchip/Kconfig                            |   1 +
 drivers/irqchip/irq-sifive-plic.c                  |  41 +++-
 8 files changed, 353 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sifive.txt
 create mode 100644 drivers/gpio/gpio-sifive.c

-- 
2.7.4