Re: [PATCH 3/3] arm64: dts: sdm845: thermal: Add critical interrupt support
From: Bjorn Andersson
Date: Tue Nov 12 2019 - 14:43:56 EST
On Mon 11 Nov 11:21 PST 2019, Amit Kucheria wrote:
> Register critical interrupts for each of the two tsens controllers
>
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> Message-Id: <3686bd40c99692feb955e936b608b080e2cb1826.1568624011.git.amit.kucheria@xxxxxxxxxx>
Picked up for v5.6.
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 0990d5761860..3b643b04ab5a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2950,8 +2950,9 @@
> reg = <0 0x0c263000 0 0x1ff>, /* TM */
> <0 0x0c222000 0 0x1ff>; /* SROT */
> #qcom,sensors = <13>;
> - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow";
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow", "critical";
> #thermal-sensor-cells = <1>;
> };
>
> @@ -2960,8 +2961,9 @@
> reg = <0 0x0c265000 0 0x1ff>, /* TM */
> <0 0x0c223000 0 0x1ff>; /* SROT */
> #qcom,sensors = <8>;
> - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow";
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow", "critical";
> #thermal-sensor-cells = <1>;
> };
>
> --
> 2.17.1
>