Re: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Fabio Estevam]

Hi Oliver,

On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@xxxxxxxxx> wrote:

> +&lcdif {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_lcdif>;
> +       display = <&display0>;
> +       status = "okay";
> +
> +       display0: display0 {
> +               bits-per-pixel = <16>;
> +               bus-width = <24>;
> +
> +               display-timings {
> +                       native-mode = <&timing0>;
> +                       timing0: timing0 {
> +                               clock-frequency =<35000000>;
> +                               hactive = <800>;
> +                               vactive = <480>;
> +                               hfront-porch = <40>;
> +                               hback-porch = <40>;
> +                               hsync-len = <48>;
> +                               vback-porch = <29>;
> +                               vfront-porch = <13>;
> +                               vsync-len = <3>;
> +                               hsync-active = <0>;
> +                               vsync-active = <0>;
> +                               de-active = <1>;
> +                               pixelclk-active = <0>;
> +                       };
> +               };
> +       };
> +};

You are using the deprecated bindings.

Please switch to the DRM bindings as stated at
Documentation/devicetree/bindings/display/mxsfb.txt

You should also add your panel to the simple panel driver.