[PATCH AUTOSEL 4.19 004/209] ARM: dts: omap5: enable OTG role for DWC3 controller

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>

[ Upstream commit 656c1a65ab555ee5c7cd0d6aee8ab82ca3c1795f ]

Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).

Tested on OMAP5EVM and Pyra.

Suggested-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 8b8db9d8e9126..c2dc4199b4ec2 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -703,6 +703,10 @@
 	vbus-supply = <&smps10_out1_reg>;
 };
 
+&dwc3 {
+	dr_mode = "otg";
+};
+
 &mcspi1 {
 
 };
-- 
2.20.1