[PATCH AUTOSEL 4.19 101/209] brcmfmac: fix full timeout waiting for action frame on-channel tx

[Sasha Levin]

From: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>

[ Upstream commit fbf07000960d9c8a13fdc17c6de0230d681c7543 ]

The driver sends an action frame down and waits for a completion signal
triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event
to continue the process. However, the action frame could be transmitted
either on the current channel or on an off channel. For the on-channel
case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when
the frame is transmitted, which make the driver always wait a full
timeout duration. This patch has the completion signal be triggered by
receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel
case.

This change fixes WFA p2p certification 5.1.19 failure.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../wireless/broadcom/brcm80211/brcmfmac/p2p.c  | 17 +++++++++++++++--
 .../wireless/broadcom/brcm80211/brcmfmac/p2p.h  |  2 ++
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index 7822740a8cb40..456a1bf008b3d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1457,10 +1457,12 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp,
 		return 0;
 
 	if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) {
-		if (e->status == BRCMF_E_STATUS_SUCCESS)
+		if (e->status == BRCMF_E_STATUS_SUCCESS) {
 			set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED,
 				&p2p->status);
-		else {
+			if (!p2p->wait_for_offchan_complete)
+				complete(&p2p->send_af_done);
+		} else {
 			set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status);
 			/* If there is no ack, we don't need to wait for
 			 * WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event
@@ -1511,6 +1513,17 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
 	p2p->af_sent_channel = le32_to_cpu(af_params->channel);
 	p2p->af_tx_sent_jiffies = jiffies;
 
+	if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status) &&
+	    p2p->af_sent_channel ==
+	    ieee80211_frequency_to_channel(p2p->remain_on_channel.center_freq))
+		p2p->wait_for_offchan_complete = false;
+	else
+		p2p->wait_for_offchan_complete = true;
+
+	brcmf_dbg(TRACE, "Waiting for %s tx completion event\n",
+		  (p2p->wait_for_offchan_complete) ?
+		   "off-channel" : "on-channel");
+
 	timeout = wait_for_completion_timeout(&p2p->send_af_done,
 					      P2P_AF_MAX_WAIT_TIME);
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
index 0e8b34d2d85cb..39f0d02180882 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
@@ -124,6 +124,7 @@ struct afx_hdl {
  * @gon_req_action: about to send go negotiation requets frame.
  * @block_gon_req_tx: drop tx go negotiation requets frame.
  * @p2pdev_dynamically: is p2p device if created by module param or supplicant.
+ * @wait_for_offchan_complete: wait for off-channel tx completion event.
  */
 struct brcmf_p2p_info {
 	struct brcmf_cfg80211_info *cfg;
@@ -144,6 +145,7 @@ struct brcmf_p2p_info {
 	bool gon_req_action;
 	bool block_gon_req_tx;
 	bool p2pdev_dynamically;
+	bool wait_for_offchan_complete;
 };
 
 s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced);
-- 
2.20.1