[PATCH AUTOSEL 4.19 188/209] hwmon: (k10temp) Support all Family 15h Model 6xh and Model 7xh processors

[Sasha Levin]

From: Guenter Roeck <linux@xxxxxxxxxxxx>

[ Upstream commit 53dfa0088edd2e2793afa21488532b12eb2dae48 ]

BIOS developer guides refer to Family 15h Models 60h-6fh and Family 15h
Models 70h-7fh. So far the driver only checked for Models 60h and 70h.
However, there are now processors with other model numbers in the same
families. Example is A10-9620P family 15h model 65h. Follow the developer
guides and mask the lower 4 bit of the model number to determine the
registers to use for reading temperatures and temperature limits.

Reported-by: Guglielmo Fanini <g.fanini@xxxxxxxxx>
Cc: Guglielmo Fanini <g.fanini@xxxxxxxxx>
Acked-by: Clemens Ladisch <clemens@xxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/hwmon/k10temp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index bb15d7816a294..2cef0c37ff6fe 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -325,8 +325,9 @@ static int k10temp_probe(struct pci_dev *pdev,
 
 	data->pdev = pdev;
 
-	if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 ||
-					  boot_cpu_data.x86_model == 0x70)) {
+	if (boot_cpu_data.x86 == 0x15 &&
+	    ((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
+	     (boot_cpu_data.x86_model & 0xf0) == 0x70)) {
 		data->read_htcreg = read_htcreg_nb_f15;
 		data->read_tempreg = read_tempreg_nb_f15;
 	} else if (boot_cpu_data.x86 == 0x17) {
-- 
2.20.1