Re: [PATCH v3 2/2] scsi: ufs: Add driver for TI wrapper for Cadence UFS IP

[Alim Akhtar]

Hi Vignesh

On Fri, Nov 8, 2019 at 10:20 PM Vignesh Raghavendra <vigneshr@xxxxxx> wrote:
>
> TI's J721e SoC has a Cadence UFS IP with a TI specific wrapper. This is
> a minimal driver to configure the wrapper. It releases the UFS slave
> device out of reset and sets up registers to indicate PHY reference
> clock input frequency before probing child Cadence UFS driver.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
>
> v3:
> Fix macros to have TI_* prefix
>
>
> v2: No change
>
>  drivers/scsi/ufs/Kconfig        | 10 ++++
>  drivers/scsi/ufs/Makefile       |  1 +
>  drivers/scsi/ufs/ti-j721e-ufs.c | 90 +++++++++++++++++++++++++++++++++
>  3 files changed, 101 insertions(+)
>  create mode 100644 drivers/scsi/ufs/ti-j721e-ufs.c
>
> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
> index 0b845ab7c3bf..d14c2243e02a 100644
> --- a/drivers/scsi/ufs/Kconfig
> +++ b/drivers/scsi/ufs/Kconfig
> @@ -132,6 +132,16 @@ config SCSI_UFS_HISI
>           Select this if you have UFS controller on Hisilicon chipset.
>           If unsure, say N.
>
> +config SCSI_UFS_TI_J721E
> +       tristate "TI glue layer for Cadence UFS Controller"
> +       depends on OF && HAS_IOMEM && (ARCH_K3 || COMPILE_TEST)
> +       help
> +         This selects driver for TI glue layer for Cadence UFS Host
> +         Controller IP.
> +
> +         Selects this if you have TI platform with UFS controller.
> +         If unsure, say N.
> +
>  config SCSI_UFS_BSG
>         bool "Universal Flash Storage BSG device node"
>         depends on SCSI_UFSHCD
> diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
> index 2a9097939bcb..94c6c5d7334b 100644
> --- a/drivers/scsi/ufs/Makefile
> +++ b/drivers/scsi/ufs/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
>  obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
>  obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
>  obj-$(CONFIG_SCSI_UFS_MEDIATEK) += ufs-mediatek.o
> +obj-$(CONFIG_SCSI_UFS_TI_J721E) += ti-j721e-ufs.o
> diff --git a/drivers/scsi/ufs/ti-j721e-ufs.c b/drivers/scsi/ufs/ti-j721e-ufs.c
> new file mode 100644
> index 000000000000..5216d228cdd9
> --- /dev/null
> +++ b/drivers/scsi/ufs/ti-j721e-ufs.c
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +//
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#define TI_UFS_SS_CTRL         0x4
> +#define TI_UFS_SS_RST_N_PCS    BIT(0)
> +#define TI_UFS_SS_CLK_26MHZ    BIT(4)
> +
> +static int ti_j721e_ufs_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       unsigned long clk_rate;
> +       void __iomem *regbase;
> +       struct clk *clk;
> +       u32 reg = 0;
> +       int ret;
> +
> +       regbase = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(regbase))
> +               return PTR_ERR(regbase);
> +
> +       pm_runtime_enable(dev);
> +       ret = pm_runtime_get_sync(dev);
> +       if (ret < 0) {
> +               pm_runtime_put_noidle(dev);
> +               return ret;
> +       }
> +
> +       /* Select MPHY refclk frequency */
> +       clk = devm_clk_get(dev, NULL);
> +       if (IS_ERR(clk)) {
> +               dev_err(dev, "Cannot claim MPHY clock.\n");
> +               return PTR_ERR(clk);
> +       }
> +       clk_rate = clk_get_rate(clk);
> +       if (clk_rate == 26000000)
> +               reg |= TI_UFS_SS_CLK_26MHZ;
> +       devm_clk_put(dev, clk);
> +
> +       /*  Take UFS slave device out of reset */
> +       reg |= TI_UFS_SS_RST_N_PCS;
> +       writel(reg, regbase + TI_UFS_SS_CTRL);
> +
> +       ret = of_platform_populate(pdev->dev.of_node, NULL, NULL,
> +                                  dev);
> +       if (ret) {
> +               dev_err(dev, "failed to populate child nodes %d\n", ret);
> +               pm_runtime_put_sync(dev);
> +       }
> +
> +       return ret;
> +}
> +
> +static int ti_j721e_ufs_remove(struct platform_device *pdev)
> +{
> +       of_platform_depopulate(&pdev->dev);
> +       pm_runtime_put_sync(&pdev->dev);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id ti_j721e_ufs_of_match[] = {
> +       {
> +               .compatible = "ti,j721e-ufs",
> +       },
> +       { },
> +};
> +
> +static struct platform_driver ti_j721e_ufs_driver = {
> +       .probe  = ti_j721e_ufs_probe,
> +       .remove = ti_j721e_ufs_remove,
> +       .driver = {
> +               .name   = "ti-j721e-ufs",
> +               .of_match_table = ti_j721e_ufs_of_match,
> +       },
> +};
> +module_platform_driver(ti_j721e_ufs_driver);
> +
> +MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@xxxxxx>");
> +MODULE_DESCRIPTION("TI UFS host controller glue driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.24.0
>


-- 
Regards,
Alim