Re: [PATCH v2 3/3] clk: meson: a1: add support for Amlogic A1 clock driver
From: Jian Hu
Date: Wed Nov 13 2019 - 09:21:13 EST
On 2019/11/13 0:59, Jerome Brunet wrote:
On Sat 09 Nov 2019 at 12:16, Jian Hu <jian.hu@xxxxxxxxxxx> wrote:
Hi, Jerome
Sorry for late rely
On 2019/11/4 16:24, Jerome Brunet wrote:
On Fri 25 Oct 2019 at 13:32, Jian Hu <jian.hu@xxxxxxxxxxx> wrote:
Hi, Jerome
Thanks for your review
On 2019/10/21 19:41, Jerome Brunet wrote:
On Fri 18 Oct 2019 at 09:14, Jian Hu <jian.hu@xxxxxxxxxxx> wrote:
The Amlogic A1 clock includes three drivers:
peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.
Unlike the previous series, there is no EE/AO domain
in A1 CLK controllers.
Signed-off-by: Jian Hu <jian.hu@xxxxxxxxxxx>
---
drivers/clk/meson/Kconfig | 10 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/a1-pll.c | 345 +++++++
drivers/clk/meson/a1-pll.h | 56 ++
drivers/clk/meson/a1.c | 2264 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/a1.h | 120 +++
6 files changed, 2796 insertions(+)
create mode 100644 drivers/clk/meson/a1-pll.c
create mode 100644 drivers/clk/meson/a1-pll.h
create mode 100644 drivers/clk/meson/a1.c
create mode 100644 drivers/clk/meson/a1.h
In the next version, one
OK, I will send a1 peripheral and pll driver in two patch.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index dabeb43..c2809b2 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -93,6 +93,16 @@ config COMMON_CLK_AXG_AUDIO
Support for the audio clock controller on AmLogic A113D devices,
aka axg, Say Y if you want audio subsystem to work.
+config COMMON_CLK_A1
+ bool
+ depends on ARCH_MESON
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_DUALDIV
+ select COMMON_CLK_MESON_PLL
+ help
+ Support for the clock controller on Amlogic A113L device,
+ aka a1. Say Y if you want peripherals to work.
+
config COMMON_CLK_G12A
bool
depends on ARCH_MESON
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 3939f21..28cbae1 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_A1) += a1-pll.o a1.o
So far, all the controller had there own option, I don't see why it
should be different here.
OK, I will add the other option CONFIG_COMMON_CLK_A1_PLL for pll driver
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
new file mode 100644
index 0000000..486d964
--- /dev/null
+++ b/drivers/clk/meson/a1-pll.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@xxxxxxxxxxx>
+ */
+
+#include <linux/platform_device.h>
Hum ... looks like some things are missing here
#include <linux/of_device.h>
#include <linux/clk-provider.h>
?
#1
There is <linux/clk-provider.h> in meson-eeclk.h file,
and for A1 driver(a1.c/a1-pll.c) the head file is not requied.
#2
For A1 driver, the file "linux/of_device.h" is not required.
It is required by meson-eeclk.c in fact.
You are using what is provided by these headers directly in this file
If meson-eeclk ever changes, your driver breaks
OK, I will add the two header file.
+#include "clk-pll.h"
+#include "meson-eeclk.h"
+#include "a1-pll.h"
Alphanumeric order please
OK, I will change it in the next version.
+
+static struct clk_regmap a1_fixed_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_FIXPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "xtal_fixpll",
+ .name = "xtal_fixpll",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fixed_pll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fixed_pll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll_dco.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is fclk_div2/3/4's parent,
+ * However, fclk_div2/3/5 feeds AXI/APB/DDR.
is it fclk_div2/3/4 or fclk_div2/3/5 ?
+ * It is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
Don't blindly copy/paste comments from other drivers. There is no driver
for the devices you are mentionning so the end of the comment is
confusing. The 3 first lines were enough
OK, I will remove the confusing comments
+ .flags = CLK_IS_CRITICAL,
>From your comment, I understand that some child are critical, not this
particular (or at least, not directly). So this can be removed AFAICT
You should even need CLK_IGNORE_UNUSED for this one since the clock will
already be enabled before the late_init() kicks in
OK, I will replace it as CLK_IGNORE_UNUSED.
+ },
+};
+
+static const struct pll_mult_range a1_hifi_pll_mult_range = {
+ .min = 32,
+ .max = 64,
+};
+
+static const struct reg_sequence a1_hifi_init_regs[] = {
+ { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18440 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x11f18440, .delay_us = 10 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x15f18440, .delay_us = 40 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001140 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
+};
+
+static struct clk_regmap a1_hifi_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_HIFIPLL_STS,
+ .shift = 31,
+ .width = 1,
+ },
+ .range = &a1_hifi_pll_mult_range,
+ .init_regs = a1_hifi_init_regs,
+ .init_count = ARRAY_SIZE(a1_hifi_init_regs),
+ .strict_sequence = true,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hifi_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "xtal_fixpll",
+ .name = "xtal_fixpll",
Both should provided when a controller transition from the old way of
describing parent to the new way. This is a new controller so it does
not apply.
I do not understand why it does not apply, could you explain more?
Your driver is new, it is not something old transitioning from global
name to clock in DT !
The xtal_fixpll clock is registered in another peripheral driver, If do not
desribe the "name" member in parent_data, "fw_name" does not work because
it has not been registered. the hifi_pll parent will be null in
/sys/kernel/debug/clk/hifi_pll/clk_parent.
HIFI PLL will be a orphan clock, but its parent should be xtal_fixpll.
There will be an orphan yes, temporarily, until both controllers are up.
Once both controller are up, the clock will be reparented if necessary.
So both of "fw_name" of "name" should be described.
No
#1
Here, I am still confused.
From the point of view of the phenomenonï the name in parent_data is
required.
HIFI PLL is described like this:
.parent_data = &(const struct clk_parent_data){
.fw_name = "xtal_hifipll",
.name = "xtal_hifipll"
}
Fixed PLL is described like this:
.parent_data = &(const struct clk_parent_data){
.fw_name = "xtal_fixpll",
},
After the system boot completelyï run cat
/sys/kernel/debug/clk/clk_summary, Here is the result:
# cat /sys/kernel/debug/clk/clk_summary
enable prepare protect duty
clock count count count rate accuracy phase cycle
--------------------------------------------------------------------
xtal 5 5 0 24000000 0 0 50000
ts_div 0 0 0 24000000 0 0 50000
ts 0 0 0 24000000 0 0 50000
pwm_f_sel 0 0 0 24000000 0 0 50000
pwm_f_div 0 0 0 24000000 0 0 50000
pwm_f 0 0 0 24000000 0 0 50000
......
xtal_syspll 0 0 0 24000000 0 0 50000
xtal_hifipll 0 0 0 24000000 0 0 50000
hifi_pll 0 0 0 1536000000 0 0 50000
xtal_usb_ctrl 0 0 0 24000000 0 0 50000
xtal_usb_phy 0 0 0 24000000 0 0 50000
xtal_fixpll 0 0 0 24000000 0 0 50000
xtal_clktree 0 0 0 24000000 0 0 50000
fixed_pll_dco 1 1 0 0 0 0 50000
This means that CCF what not able to resolve the parent.
Either:
* you've made a mistake somewhere
* There is bug in CCF when the parent device is not available at probe
time, the clock is not properly reparented
#1 Add DT describtion
DT description:
clkc_pll: pll-clock-controller {
compatible = "amlogic,a1-pll-clkc";
#clock-cells = <1>;
reg = <0 0x7c80 0 0x21c>;
clocks = <&clkc_periphs CLKID_XTAL_FIXPLL>,
<&clkc_periphs CLKID_XTAL_HIFIPLL>;
clock-names = "xtal_fixpll", "xtal_hifipll";
};
clkc_periphs: periphs-clock-controller {
compatible = "amlogic,a1-periphs-clkc";
#clock-cells = <1>;
reg = <0 0x800 0 0x104>;
clocks = <&clkc_pll CLKID_FCLK_DIV2>,
<&clkc_pll CLKID_FCLK_DIV3>,
<&clkc_pll CLKID_FCLK_DIV5>,
<&clkc_pll CLKID_FCLK_DIV7>,
<&clkc_pll CLKID_HIFI_PLL>,
<&xtal>;
clock-names = "fclk_div2", "fclk_div3", "fclk_div5",
"fclk_div7", "hifi_pll", "xtal";
};
And PLL clock driver probe first.
When register xtal_fixpll clock in periphs driver
it will walk the list of orphan clocks, it will try to get the orphan
parent.
the code path is :
struct clk_core *parent = __clk_init_parent(orphan)
-> clk_core_get_parent_by_index(core, index)
->clk_core_fill_parent_index
->clk_core_get
->of_clk_get_hw_from_clkspec
In of_clk_get_hw_from_clkspec function, it will get hw_clk from
clk_provider, However the peripheral clock provider has not been
added to "of_clk_providers" LIST, In other words, the peripheral clock
provider does not exist at this time. (devm_of_clk_add_hw_provider has
not run)
So It will get parent failed from DT.
even if name is added in parent_data, PTR_ERR(parent) is not equal
-ENOENT, it will not run clk_core_lookup, the fixed_pll_dco is still a
orphan clock.
#2 Not add DT describtion
the code path is :
struct clk_core *parent = __clk_init_parent(orphan)
-> clk_core_get_parent_by_index(core, index)
->clk_core_fill_parent_index
->clk_core_get
->clk_find_hw
clk_find_hw is used when the clock is registered by clk_register_clkdev
So it wlll get parented failed by clk_find_hw.
When name is described in parent_data, the parent will be found by
clk_core_lookup.
In this sceneïOnly fw_name in parent_data, the orphan clock's parent can
not be found, But add the legacy name, the parent will be found.
#3
When the provider has not been added to the CCF, And fw_name is alone in
parent_data in a orphan clock , How to get the orphan clock'parent ?
It seems not supported.
Either way, you'll have to debug a bit more
fixed_pll 3 3 0 0 0 0 50000
fclk_div7_div 0 0 0 0 0 0 50000
....
the hifi_pll's parent is xtal_hifi, And the hifi_pll default rate is right.
but the fixed_pll_dco is a orphan clock, its parent is NULL.And its rate
is zero.When the name in parent_data is added, its parent is xtal_fixpll.
# cat /sys/kernel/debug/clk/fixed_pll_dco/clk_parent
#
# cat /sys/kernel/debug/clk/fixed_pll_dco/clk_rate
0
#2
In ./drivers/clk/qcom/gcc-sm8150.c
For some clocks, Both fw_name and name are described in parent_data
struct.
Those are being migrated to DT description which means that we don't
know if the DT will the correct description
In this case the clock framework will first try DT and if DT does
provide this fw_name, it will fallback to the legacy name.
This is not your case as this is a new platform for which we know the DT
name exist.
It will get parent failed from DT as the previous says.
Same for the other occurences.
Also, I think you meant xtal_hifipll
Yes,I will correct it.
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div2_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by DDR clock in BL2 firmware
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div3_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by APB bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div5_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by AXI bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div7 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div7_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data a1_pll_hw_onecell_data = {
+ .hws = {
+ [CLKID_FIXED_PLL_DCO] = &a1_fixed_pll_dco.hw,
+ [CLKID_FIXED_PLL] = &a1_fixed_pll.hw,
+ [CLKID_HIFI_PLL] = &a1_hifi_pll.hw,
+ [CLKID_FCLK_DIV2] = &a1_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &a1_fclk_div3.hw,
+ [CLKID_FCLK_DIV5] = &a1_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &a1_fclk_div7.hw,
+ [CLKID_FCLK_DIV2_DIV] = &a1_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &a1_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &a1_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &a1_fclk_div7_div.hw,
+ [NR_PLL_CLKS] = NULL,
+ },
+ .num = NR_PLL_CLKS,
+};
+
+static struct clk_regmap *const a1_pll_regmaps[] = {
+ &a1_fixed_pll_dco,
+ &a1_fixed_pll,
+ &a1_hifi_pll,
+ &a1_fclk_div2,
+ &a1_fclk_div3,
+ &a1_fclk_div5,
+ &a1_fclk_div7,
+};
+
+static int meson_a1_pll_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = meson_eeclkc_probe(pdev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
This function is useless.
OK, I will use meson_eeclkc_probe derectly.
+
+static const struct meson_eeclkc_data a1_pll_data = {
+ .regmap_clks = a1_pll_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(a1_pll_regmaps),
+ .hw_onecell_data = &a1_pll_hw_onecell_data,
+};
+static const struct of_device_id clkc_match_table[] = {
+ {
+ .compatible = "amlogic,a1-pll-clkc",
+ .data = &a1_pll_data
+ },
+ { /* sentinel */ }
Nitpick: don't need to write this, just write the line like this
OK, remove it.
' }, {}'
+};
+
+static struct platform_driver a1_driver = {
+ .probe = meson_a1_pll_probe,
+ .driver = {
+ .name = "a1-pll-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(a1_driver);
diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
new file mode 100644
index 0000000..99ee2a9
--- /dev/null
+++ b/drivers/clk/meson/a1-pll.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __A1_PLL_H
+#define __A1_PLL_H
+
+/* PLL register offset */
+#define ANACTRL_FIXPLL_CTRL0 0x80
+#define ANACTRL_FIXPLL_CTRL1 0x84
+#define ANACTRL_FIXPLL_CTRL2 0x88
+#define ANACTRL_FIXPLL_CTRL3 0x8c
+#define ANACTRL_FIXPLL_CTRL4 0x90
+#define ANACTRL_FIXPLL_STS 0x94
+#define ANACTRL_SYSPLL_CTRL0 0x100
+#define ANACTRL_SYSPLL_CTRL1 0x104
+#define ANACTRL_SYSPLL_CTRL2 0x108
+#define ANACTRL_SYSPLL_CTRL3 0x10c
+#define ANACTRL_SYSPLL_CTRL4 0x110
+#define ANACTRL_SYSPLL_STS 0x114
+#define ANACTRL_HIFIPLL_CTRL0 0x140
+#define ANACTRL_HIFIPLL_CTRL1 0x144
+#define ANACTRL_HIFIPLL_CTRL2 0x148
+#define ANACTRL_HIFIPLL_CTRL3 0x14c
+#define ANACTRL_HIFIPLL_CTRL4 0x150
+#define ANACTRL_HIFIPLL_STS 0x154
+#define ANACTRL_AUDDDS_CTRL0 0x180
+#define ANACTRL_AUDDDS_CTRL1 0x184
+#define ANACTRL_AUDDDS_CTRL2 0x188
+#define ANACTRL_AUDDDS_CTRL3 0x18c
+#define ANACTRL_AUDDDS_CTRL4 0x190
+#define ANACTRL_AUDDDS_STS 0x194
+#define ANACTRL_MISCTOP_CTRL0 0x1c0
+#define ANACTRL_POR_CNTL 0x208
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_FIXED_PLL_DCO 0
+#define CLKID_FCLK_DIV2_DIV 2
+#define CLKID_FCLK_DIV3_DIV 3
+#define CLKID_FCLK_DIV5_DIV 4
+#define CLKID_FCLK_DIV7_DIV 5
+#define NR_PLL_CLKS 11
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/a1-pll-clkc.h>
+
+#endif /* __A1_PLL_H */
diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c
new file mode 100644
index 0000000..86a4733
--- /dev/null
+++ b/drivers/clk/meson/a1.c
@@ -0,0 +1,2264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@xxxxxxxxxxx>
+ */
+
+#include <linux/platform_device.h>
+#include "clk-pll.h"
+#include "clk-dualdiv.h"
+#include "meson-eeclk.h"
+#include "a1.h"
Same as above
OK, I will change the order.
In fact, the clk-pll.h is not used in the current driver.
I will remove it.
+
+/* PLLs clock in gates, its parent is xtal */
+static struct clk_regmap a1_xtal_clktree = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_clktree",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ /*
+ * switch for xtal clock
+ * Linux should not change it at runtime
+ */
Comment not useful: it uses the Ro ops
OK, remove the comments
+ },
+};
+
+static struct clk_regmap a1_xtal_fixpll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_fixpll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ /*
+ * it feeds DDR,AXI,APB bus
+ * Linux should not change it at runtime
+ */
Again, the child are critical, not directly this clock from your
comment.
Remove CRITICAL, put RO is linux is not supposed to touch it.
repace as clk_regmap_gate_ro_ops
+ },
+};
+
[ ... ]
+
+/* dsp a clk */
+static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 };
+static const struct clk_parent_data dsp_ab_clk_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div2", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "hifi_pll", },
+ { .hw = &a1_rtc_clk.hw },
+};
+
+static struct clk_regmap a1_dspa_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPA_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 10,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
.flags = CLK_SET_RATE_PARENT ?
Yes, I miss the flag.
+ },
+};
+
+static struct clk_regmap a1_dspa_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPA_CLK_CTRL0,
+ .shift = 0,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_CTRL0,
+ .bit_idx = 13,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPA_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 26,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
.flags = CLK_SET_RATE_PARENT ?
Yes, I will add it.
+ },
+};
+
+static struct clk_regmap a1_dspa_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPA_CLK_CTRL0,
+ .shift = 16,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_CTRL0,
+ .bit_idx = 29,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPA_CLK_CTRL0,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_dspa_a.hw },
+ { .hw = &a1_dspa_b.hw },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_en_dspa = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_EN,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_en_dspa",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Why do you need CLK_IGNORE_UNUSED ?
I should remove it
+ },
+};
+
+static struct clk_regmap a1_dspa_en_nic = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_EN,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_en_nic",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Why do you need CLK_IGNORE_UNUSED ?
I should remove it
+ },
+};
+
Same question and remarks applies to DSP B
got it
+/* dsp b clk */
+static struct clk_regmap a1_dspb_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPB_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 10,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap a1_dspb_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPB_CLK_CTRL0,
+ .shift = 0,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspb_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_CTRL0,
+ .bit_idx = 13,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap a1_dspb_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPB_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 26,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap a1_dspb_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPB_CLK_CTRL0,
+ .shift = 16,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspb_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_CTRL0,
+ .bit_idx = 29,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap a1_dspb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPB_CLK_CTRL0,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_a.hw, &a1_dspb_b.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspb_en_dspb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_EN,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_en_dspb",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap a1_dspb_en_nic = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_EN,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_en_nic",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+/* 12M/24M clock */
+static struct clk_regmap a1_24m = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLK12_24_CTRL,
+ .bit_idx = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "24m",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
[ ... ]
+static struct clk_regmap a1_saradc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SAR_ADC_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "saradc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &a1_sys_clk.hw, },
+ },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap a1_saradc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = SAR_ADC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_saradc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_saradc_clk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SAR_ADC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "saradc_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_saradc_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm a/b/c/d parent data */
+static const struct clk_parent_data pwm_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &a1_sys_clk.hw },
+};
Looks like the same as SAR ADC
OK, I will describe it like SAR ADC for pwm a/b/c/d
+
+/* pwm a clk */
+static struct clk_regmap a1_pwm_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .mask = 0x1,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_a_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * The CPU working voltage is controlled by pwm_a
+ * in BL2 firmware. add the CLK_IGNORE_UNUSED flag
+ * to avoid changing at runtime.
^ it
+ * and is required by the platform to operate correctly.
"blabla. And" is strange
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
This only skips the late_init() disable of unused clocks
Be aware that this is not fool-proof. If at any time a driver enable
then disable the clock, the clock will be disable and I guess your
platform will die if this provides the CPU voltage.
OK, CLK_IS_CRITICAL is better.
+ },
+};
+
+/* pwm b clk */
+static struct clk_regmap a1_pwm_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .mask = 0x1,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm c clk */
+static struct clk_regmap a1_pwm_c_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .mask = 0x1,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_c_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_c_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_c_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_c_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_c = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_c",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_c_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm d clk */
+static struct clk_regmap a1_pwm_d_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .mask = 0x1,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_d_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_d_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_d_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_d_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_d = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_d",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_d_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data pwm_ef_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &a1_sys_clk.hw },
+ { .fw_name = "fclk_div5", },
+ { .hw = &a1_rtc_clk.hw },
+};
+
+/* pwm e clk */
+static struct clk_regmap a1_pwm_e_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_e_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_ef_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_ef_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_e_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_e_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_e_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_e = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_e",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_e_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm f clk */
+static struct clk_regmap a1_pwm_f_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_f_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_ef_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_ef_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_f_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_f_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_f_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_f = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_f",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_f_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
[ ... ]
+
+/* dmc clk */
+static struct clk_regmap a1_dmc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DMC_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dmc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = sd_emmc_parents,
+ .num_parents = 4,
+ },
+};
+
+static struct clk_regmap a1_dmc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DMC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dmc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dmc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dmc_sel2 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DMC_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dmc_sel2",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_dmc_div.hw },
+ { .fw_name = "xtal", },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dmc = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DMC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dmc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dmc_sel2.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by DDR clock which setted in BL2
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ },
+};
Should you put all this DMC stuff in RO until you got a driver for it ?
OK, replace as clk_regmap_gate_ro_ops
[ ... ]
+
+static int meson_a1_periphs_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = meson_eeclkc_probe(pdev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
Again this function is function is useless and it makes me wonder if you
should really be using meson_eeclkc_probe()
This makes you use syscon which is not correct unless you have a good
reason ?
If it can not use the meson_eeclkc_probe(), I will realize a probe function
which is mostly duplicate with meson_eeclkc_probe() except
"syscon_node_to_regmap"
Maybe another common probe function and a new file are required for A1
three drivers? ïinclude the CPU clock driverï
Maybe
I will add a new function base on meson-eeclk.c
Or using meson_eeclkc_probe is more easier?
It is not question of easiness, but correctness.
Is there anything but clocks and resets in these register region ?
No, there is only clocks in the register region.
the same does the PLL register region.
Then there is no reason to use syscon for those drivers
Add a new probe function for A1
+
+static const struct meson_eeclkc_data a1_periphs_data = {
+ .regmap_clks = a1_periphs_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(a1_periphs_regmaps),
+ .hw_onecell_data = &a1_periphs_hw_onecell_data,
+};
+static const struct of_device_id clkc_match_table[] = {
+ {
+ .compatible = "amlogic,a1-periphs-clkc",
+ .data = &a1_periphs_data
+ },
+ { /* sentinel */ }
+};
+
+static struct platform_driver a1_driver = {
+ .probe = meson_a1_periphs_probe,
+ .driver = {
+ .name = "a1-periphs-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(a1_driver);
diff --git a/drivers/clk/meson/a1.h b/drivers/clk/meson/a1.h
new file mode 100644
index 0000000..1ae5e04
--- /dev/null
+++ b/drivers/clk/meson/a1.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __A1_H
+#define __A1_H
+
+/* peripheral clock controller register offset */
+#define SYS_OSCIN_CTRL 0x0
+#define RTC_BY_OSCIN_CTRL0 0x4
+#define RTC_BY_OSCIN_CTRL1 0x8
+#define RTC_CTRL 0xc
+#define SYS_CLK_CTRL0 0x10
+#define AXI_CLK_CTRL0 0x14
+#define SYS_CLK_EN0 0x1c
+#define SYS_CLK_EN1 0x20
+#define AXI_CLK_EN 0x24
+#define DSPA_CLK_EN 0x28
+#define DSPB_CLK_EN 0x2c
+#define DSPA_CLK_CTRL0 0x30
+#define DSPB_CLK_CTRL0 0x34
+#define CLK12_24_CTRL 0x38
+#define GEN_CLK_CTRL 0x3c
+#define TIMESTAMP_CTRL0 0x40
+#define TIMESTAMP_CTRL1 0x44
+#define TIMESTAMP_CTRL2 0x48
+#define TIMESTAMP_VAL0 0x4c
+#define TIMESTAMP_VAL1 0x50
+#define TIMEBASE_CTRL0 0x54
+#define TIMEBASE_CTRL1 0x58
+#define SAR_ADC_CLK_CTRL 0xc0
+#define PWM_CLK_AB_CTRL 0xc4
+#define PWM_CLK_CD_CTRL 0xc8
+#define PWM_CLK_EF_CTRL 0xcc
+#define SPICC_CLK_CTRL 0xd0
+#define TS_CLK_CTRL 0xd4
+#define SPIFC_CLK_CTRL 0xd8
+#define USB_BUSCLK_CTRL 0xdc
+#define SD_EMMC_CLK_CTRL 0xe0
+#define CECA_CLK_CTRL0 0xe4
+#define CECA_CLK_CTRL1 0xe8
+#define CECB_CLK_CTRL0 0xec
+#define CECB_CLK_CTRL1 0xf0
+#define PSRAM_CLK_CTRL 0xf4
+#define DMC_CLK_CTRL 0xf8
+#define FCLK_DIV1_SEL 0xfc
+#define TST_CTRL 0x100
+
+#define CLKID_XTAL_CLKTREE 0
+#define CLKID_SYS_A_SEL 89
+#define CLKID_SYS_A_DIV 90
+#define CLKID_SYS_A 91
+#define CLKID_SYS_B_SEL 92
+#define CLKID_SYS_B_DIV 93
+#define CLKID_SYS_B 94
+#define CLKID_DSPA_A_SEL 95
+#define CLKID_DSPA_A_DIV 96
+#define CLKID_DSPA_A 97
+#define CLKID_DSPA_B_SEL 98
+#define CLKID_DSPA_B_DIV 99
+#define CLKID_DSPA_B 100
+#define CLKID_DSPB_A_SEL 101
+#define CLKID_DSPB_A_DIV 102
+#define CLKID_DSPB_A 103
+#define CLKID_DSPB_B_SEL 104
+#define CLKID_DSPB_B_DIV 105
+#define CLKID_DSPB_B 106
+#define CLKID_RTC_32K_CLKIN 107
+#define CLKID_RTC_32K_DIV 108
+#define CLKID_RTC_32K_XTAL 109
+#define CLKID_RTC_32K_SEL 110
+#define CLKID_CECB_32K_CLKIN 111
+#define CLKID_CECB_32K_DIV 112
+#define CLKID_CECB_32K_SEL_PRE 113
+#define CLKID_CECB_32K_SEL 114
+#define CLKID_CECA_32K_CLKIN 115
+#define CLKID_CECA_32K_DIV 116
+#define CLKID_CECA_32K_SEL_PRE 117
+#define CLKID_CECA_32K_SEL 118
+#define CLKID_DIV2_PRE 119
+#define CLKID_24M_DIV2 120
+#define CLKID_GEN_SEL 121
+#define CLKID_GEN_DIV 122
+#define CLKID_SARADC_DIV 123
+#define CLKID_PWM_A_SEL 124
+#define CLKID_PWM_A_DIV 125
+#define CLKID_PWM_B_SEL 126
+#define CLKID_PWM_B_DIV 127
+#define CLKID_PWM_C_SEL 128
+#define CLKID_PWM_C_DIV 129
+#define CLKID_PWM_D_SEL 130
+#define CLKID_PWM_D_DIV 131
+#define CLKID_PWM_E_SEL 132
+#define CLKID_PWM_E_DIV 133
+#define CLKID_PWM_F_SEL 134
+#define CLKID_PWM_F_DIV 135
+#define CLKID_SPICC_SEL 136
+#define CLKID_SPICC_DIV 137
+#define CLKID_SPICC_SEL2 138
+#define CLKID_TS_DIV 139
+#define CLKID_SPIFC_SEL 140
+#define CLKID_SPIFC_DIV 141
+#define CLKID_SPIFC_SEL2 142
+#define CLKID_USB_BUS_SEL 143
+#define CLKID_USB_BUS_DIV 144
+#define CLKID_SD_EMMC_SEL 145
+#define CLKID_SD_EMMC_DIV 146
+#define CLKID_SD_EMMC_SEL2 147
+#define CLKID_PSRAM_SEL 148
+#define CLKID_PSRAM_DIV 149
+#define CLKID_PSRAM_SEL2 150
+#define CLKID_DMC_SEL 151
+#define CLKID_DMC_DIV 152
+#define CLKID_DMC_SEL2 153
+#define NR_CLKS 154
+
+#include <dt-bindings/clock/a1-clkc.h>
+
+#endif /* __A1_H */
.
.
.