RE: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)

From: Shameerali Kolothum Thodi
Date: Wed Nov 13 2019 - 11:24:25 EST

Next message: Bean Huo (beanhuo): "RE: [EXT] [PATCH v4 3/5] scsi: ufs: Release clock if DMA map fails"
Previous message: Colin King: "[PATCH][next] net: ethernet: stmmac: fix indentation issue"
In reply to: Auger Eric: "Re: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Eric,

> -----Original Message-----
> From: Auger Eric [mailto:eric.auger@xxxxxxxxxx]
> Sent: 12 November 2019 20:35
> To: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@xxxxxxxxxx>;
> eric.auger.pro@xxxxxxxxx; iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; kvm@xxxxxxxxxxxxxxx;
> kvmarm@xxxxxxxxxxxxxxxxxxxxx; joro@xxxxxxxxxx;
> alex.williamson@xxxxxxxxxx; jacob.jun.pan@xxxxxxxxxxxxxxx;
> yi.l.liu@xxxxxxxxx; jean-philippe.brucker@xxxxxxx; will.deacon@xxxxxxx;
> robin.murphy@xxxxxxx
> Cc: kevin.tian@xxxxxxxxx; vincent.stehle@xxxxxxx; ashok.raj@xxxxxxxxx;
> marc.zyngier@xxxxxxx; tina.zhang@xxxxxxxxx; Linuxarm
> <linuxarm@xxxxxxxxxx>; xuwei (O) <xuwei5@xxxxxxxxxx>
> Subject: Re: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)
>
> Hi Shameer,
>

[..]

> >
> > I just noted that CMDQ_OP_TLBI_NH_VA is missing the vmid filed which
> seems
> > to be the cause for single IOVA TLBI not working properly.
> >
> > I had this fix in arm-smmuv3.c,
> >
> > @@ -947,6 +947,7 @@ static int arm_smmu_cmdq_build_cmd(u64 *cmd,
> struct arm_smmu_cmdq_ent *ent)
> > cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_RANGE, 31);
> > break;
> > case CMDQ_OP_TLBI_NH_VA:
> > + cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_VMID, ent->tlbi.vmid);
> Damn, I did not see that! That's it. ASID invalidation fills this field
> indeed. You may post an independent patch for that.

Sure. Just did that.
" iommu/arm-smmu-v3: Populate VMID field for CMDQ_OP_TLBI_NH_VA"

> cmd[0] |=
> FIELD_PREP(CMDQ_TLBI_0_ASID, ent->tlbi.asid);
> > cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_LEAF, ent->tlbi.leaf);
> > cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_VA_MASK;
> >
> >
> > With this, your original qemu branch is working.
> >
> > root@ubuntu:~# iperf -c 10.202.225.185
> > ------------------------------------------------------------
> > Client connecting to 10.202.225.185, TCP port 5001 TCP window size: 85.0
> KByte (default)
> > ------------------------------------------------------------
> > [ 3] local 10.202.225.169 port 44894 connected with 10.202.225.185 port
> 5001
> > [ ID] Interval Transfer Bandwidth
> > [ 3] 0.0-10.0 sec 3.21 GBytes 2.76 Gbits/sec
> >
> > Could you please check this...
> >
> > I also have a rebase of your patches on top of 5.4-rc5. This has some
> optimizations
> > From Will such as batched TLBI inv. Please find it here,
> >
> > https://github.com/hisilicon/kernel-dev/tree/private-vSMMUv3-v9-v5.4-rc5
> >
> > This gives me a better performance with iperf,
> >
> > root@ubuntu:~# iperf -c 10.202.225.185
> > ------------------------------------------------------------
> > Client connecting to 10.202.225.185, TCP port 5001 TCP window size: 85.0
> KByte (default)
> > ------------------------------------------------------------
> > [ 3] local 10.202.225.169 port 55450 connected with 10.202.225.185 port
> 5001
> > [ ID] Interval Transfer Bandwidth
> > [ 3] 0.0-10.0 sec 4.91 GBytes 4.22 Gbits/sec root@ubuntu:~#
> >
> > If possible please check this branch as well.
>
> To be honest I don't really know what to do with this work. Despite the
> efforts, this has suffered from a lack of traction in the community. My
> last attempt to explain the use cases, upon Will's request at Plumber,
> has not received any comment (https://lkml.org/lkml/2019/9/20/104).
>
> I think I will post a rebased version with your fix, as a matter to get
> a clean snapshot.

Thanks. That makes sense.

If you think this work is useful for your projects,
> please let it know on the ML.

Right. While SVA use case is definitely the one we are very much interested, I will
check within our team the priority for use case 1(native drivers in Guest) you
mentioned in the above link.

Cheers,
Shameer

> Thank you again!
>
> Eric
> >
> > Thanks,
> > Shameer
> >
> >> Thanks,
> >> Shameer
> >>
> >>
> >>> Thanks
> >>>
> >>> Eric
> >>>>
> >>>> Cheers,
> >>>> Shameer
> >>>>
> >>>>> Thanks
> >>>>>
> >>>>> Eric
> >>>>>
> >>>>>
> >>>>>
> >>>>>>
> >>>>>> Please let me know.
> >>>>>>
> >>>>>> Thanks,
> >>>>>> Shameer
> >>>>>>
> >>>>>>> Best Regards
> >>>>>>>
> >>>>>>> Eric
> >>>>>>>
> >>>>>>> This series can be found at:
> >>>>>>> https://github.com/eauger/linux/tree/v5.3.0-rc0-2stage-v9
> >>>>>>>
> >>>>>>> It series includes Tina's patch steming from
> >>>>>>> [1] "[RFC PATCH v2 1/3] vfio: Use capability chains to handle device
> >>>>>>> specific irq" plus patches originally contributed by Yi.
> >>>>>>>
> >>>>>>> History:
> >>>>>>>
> >>>>>>> v8 -> v9:
> >>>>>>> - introduce specific irq framework
> >>>>>>> - single fault region
> >>>>>>> - iommu_unregister_device_fault_handler failure case not handled
> >>>>>>> yet.
> >>>>>>>
> >>>>>>> v7 -> v8:
> >>>>>>> - rebase on top of v5.2-rc1 and especially
> >>>>>>> 8be39a1a04c1 iommu/arm-smmu-v3: Add a master->domain
> >> pointer
> >>>>>>> - dynamic alloc of s1_cfg/s2_cfg
> >>>>>>> - __arm_smmu_tlb_inv_asid/s1_range_nosync
> >>>>>>> - check there is no HW MSI regions
> >>>>>>> - asid invalidation using pasid extended struct (change in the uapi)
> >>>>>>> - add s1_live/s2_live checks
> >>>>>>> - move check about support of nested stages in domain finalise
> >>>>>>> - fixes in error reporting according to the discussion with Robin
> >>>>>>> - reordered the patches to have first iommu/smmuv3 patches and
> then
> >>>>>>> VFIO patches
> >>>>>>>
> >>>>>>> v6 -> v7:
> >>>>>>> - removed device handle from bind/unbind_guest_msi
> >>>>>>> - added "iommu/smmuv3: Nested mode single MSI doorbell per
> domain
> >>>>>>> enforcement"
> >>>>>>> - added few uapi comments as suggested by Jean, Jacop and Alex
> >>>>>>>
> >>>>>>> v5 -> v6:
> >>>>>>> - Fix compilation issue when CONFIG_IOMMU_API is unset
> >>>>>>>
> >>>>>>> v4 -> v5:
> >>>>>>> - fix bug reported by Vincent: fault handler unregistration now
> happens
> >> in
> >>>>>>> vfio_pci_release
> >>>>>>> - IOMMU_FAULT_PERM_* moved outside of struct definition + small
> >>>>>>> uapi changes suggested by Kean-Philippe (except fetch_addr)
> >>>>>>> - iommu: introduce device fault report API: removed the PRI part.
> >>>>>>> - see individual logs for more details
> >>>>>>> - reset the ste abort flag on detach
> >>>>>>>
> >>>>>>> v3 -> v4:
> >>>>>>> - took into account Alex, jean-Philippe and Robin's comments on v3
> >>>>>>> - rework of the smmuv3 driver integration
> >>>>>>> - add tear down ops for msi binding and PASID table binding
> >>>>>>> - fix S1 fault propagation
> >>>>>>> - put fault reporting patches at the beginning of the series following
> >>>>>>> Jean-Philippe's request
> >>>>>>> - update of the cache invalidate and fault API uapis
> >>>>>>> - VFIO fault reporting rework with 2 separate regions and one
> >> mmappable
> >>>>>>> segment for the fault queue
> >>>>>>> - moved to PATCH
> >>>>>>>
> >>>>>>> v2 -> v3:
> >>>>>>> - When registering the S1 MSI binding we now store the device
> handle.
> >>> This
> >>>>>>> addresses Robin's comment about discimination of devices
> beonging
> >>> to
> >>>>>>> different S1 groups and using different physical MSI doorbells.
> >>>>>>> - Change the fault reporting API: use
> >> VFIO_PCI_DMA_FAULT_IRQ_INDEX
> >>> to
> >>>>>>> set the eventfd and expose the faults through an mmappable fault
> >>> region
> >>>>>>>
> >>>>>>> v1 -> v2:
> >>>>>>> - Added the fault reporting capability
> >>>>>>> - asid properly passed on invalidation (fix assignment of multiple
> >>>>>>> devices)
> >>>>>>> - see individual change logs for more info
> >>>>>>>
> >>>>>>>
> >>>>>>> Eric Auger (8):
> >>>>>>> vfio: VFIO_IOMMU_SET_MSI_BINDING
> >>>>>>> vfio/pci: Add VFIO_REGION_TYPE_NESTED region type
> >>>>>>> vfio/pci: Register an iommu fault handler
> >>>>>>> vfio/pci: Allow to mmap the fault queue
> >>>>>>> vfio: Add new IRQ for DMA fault reporting
> >>>>>>> vfio/pci: Add framework for custom interrupt indices
> >>>>>>> vfio/pci: Register and allow DMA FAULT IRQ signaling
> >>>>>>> vfio: Document nested stage control
> >>>>>>>
> >>>>>>> Liu, Yi L (2):
> >>>>>>> vfio: VFIO_IOMMU_SET_PASID_TABLE
> >>>>>>> vfio: VFIO_IOMMU_CACHE_INVALIDATE
> >>>>>>>
> >>>>>>> Tina Zhang (1):
> >>>>>>> vfio: Use capability chains to handle device specific irq
> >>>>>>>
> >>>>>>> Documentation/vfio.txt | 77 ++++++++
> >>>>>>> drivers/vfio/pci/vfio_pci.c | 283
> >>>>> ++++++++++++++++++++++++++--
> >>>>>>> drivers/vfio/pci/vfio_pci_intrs.c | 62 ++++++
> >>>>>>> drivers/vfio/pci/vfio_pci_private.h | 24 +++
> >>>>>>> drivers/vfio/pci/vfio_pci_rdwr.c | 45 +++++
> >>>>>>> drivers/vfio/vfio_iommu_type1.c | 166 ++++++++++++++++
> >>>>>>> include/uapi/linux/vfio.h | 109 ++++++++++-
> >>>>>>> 7 files changed, 747 insertions(+), 19 deletions(-)
> >>>>>>>
> >>>>>>> --
> >>>>>>> 2.20.1
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> kvmarm mailing list
> >>>>>>> kvmarm@xxxxxxxxxxxxxxxxxxxxx
> >>>>>>> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
> >>>>
> >

Next message: Bean Huo (beanhuo): "RE: [EXT] [PATCH v4 3/5] scsi: ufs: Release clock if DMA map fails"
Previous message: Colin King: "[PATCH][next] net: ethernet: stmmac: fix indentation issue"
In reply to: Auger Eric: "Re: [PATCH v9 00/11] SMMUv3 Nested Stage Setup (VFIO part)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]