Re: [PATCH 1/2] usb: dwc3: gadget: make starting isoc transfers more robust
From: Thinh Nguyen
Date: Wed Nov 13 2019 - 14:40:41 EST
Hi,
Michael Olbrich wrote:
> Hi,
>
> On Wed, Nov 13, 2019 at 03:55:30AM +0000, Thinh Nguyen wrote:
>> Michael Olbrich wrote:
>>> Currently __dwc3_gadget_start_isoc must be called very shortly after
>>> XferNotReady. Otherwise the frame number is outdated and start transfer
>>> will fail, even with several retries.
>>>
>>> DSTS provides the lower 14 bit of the frame number. Use it in combination
>>> with the frame number provided by XferNotReady to guess the current frame
>>> number. This will succeed unless more than one 14 rollover has happened
>>> since XferNotReady.
>>>
>>> Start transfer might still fail if the frame number is increased
>>> immediately after DSTS is read. So retries are still needed.
>>> Don't drop the current request if this happens. This way it is not lost and
>>> can be used immediately to try again with the next frame number.
>>>
>>> With this change, __dwc3_gadget_start_isoc is still not successfully in all
>>> cases bit it increases the acceptable delay after XferNotReady
>>> significantly.
>>>
>>> Signed-off-by: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
>>> ---
>>> drivers/usb/dwc3/core.h | 1 +
>>> drivers/usb/dwc3/gadget.c | 31 +++++++++++++++++++++++--------
>>> 2 files changed, 24 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>>> index 3dd783b889cb..c5b223656e08 100644
>>> --- a/drivers/usb/dwc3/core.h
>>> +++ b/drivers/usb/dwc3/core.h
>>> @@ -709,6 +709,7 @@ struct dwc3_ep {
>>> u8 type;
>>> u8 resource_index;
>>> u32 frame_number;
>>> + u32 last_frame_number;
>> There's no need to add a new field for last_frame_number. Just store the
>> value in a local variable in __dwc3_gadget_start_isoc().
> I'm using it to check for rollover, so __dwc3_gadget_start_isoc does not
> help. I introduced it because I caused a second (incorrect) rollover when
> the first try failed. But now that I think about it, it should be possible
> without the extra variable.
We don't need this extra field for dwc3_ep. If you need to add a new
one, then you need to also describe that field in the struct dwc3_ep.
>
>>> u32 interval;
>>>
>>> char name[20];
>>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>>> index 173f5329d3d9..ac4673d91939 100644
>>> --- a/drivers/usb/dwc3/gadget.c
>>> +++ b/drivers/usb/dwc3/gadget.c
>>> @@ -1204,7 +1204,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
>>> }
>>> }
>>>
>>> -static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
>>> +static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, bool keep_req)
>>> {
>>> struct dwc3_gadget_ep_cmd_params params;
>>> struct dwc3_request *req;
>>> @@ -1242,7 +1242,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
>>> }
>>>
>>> ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
>>> - if (ret < 0) {
>>> + if (ret < 0 && (!keep_req || ret != -EAGAIN)) {
>>> /*
>>> * FIXME we need to iterate over the list of requests
>>> * here and stop, unmap, free and del each of the linked
>>> @@ -1254,7 +1254,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
>>> return ret;
>>> }
>>>
>>> - return 0;
>>> + return ret;
>>> }
>>>
>>> static int __dwc3_gadget_get_frame(struct dwc3 *dwc)
>>> @@ -1377,7 +1377,7 @@ static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep)
>>> dep->start_cmd_status = 0;
>>> dep->combo_num = 0;
>>>
>>> - return __dwc3_gadget_kick_transfer(dep);
>>> + return __dwc3_gadget_kick_transfer(dep, false);
>>> }
>>>
>>> static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
>>> @@ -1402,9 +1402,23 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
>>> }
>>>
>>> for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) {
>>> - dep->frame_number = DWC3_ALIGN_FRAME(dep, i + 1);
>>> + /*
>>> + * last_frame_number is set from XferNotReady and may be
>>> + * already out of date. DSTS only provides the lower 14 bit
>>> + * of the current frame number. So add the upper two bits of
>>> + * last_frame_number and handle a possible rollover.
>>> + * This will provide the correct frame_number unless more than
>>> + * rollover has happened since XferNotReady.
>>> + */
>>> + u32 frame = __dwc3_gadget_get_frame(dwc);
>>> +
>>> + dep->frame_number = (dep->last_frame_number & ~0x3fff) | frame;
>>> + if (frame < (dep->last_frame_number & 0x3fff))
>>> + dep->frame_number += 0x4000;
>> Use BIT(14) rather than 0x4000? It's clearer in in my opinion. We
> Ok.
>
>> started using 0x3fff in multiple places now, can we create a macro for that?
> Makes sense. Any preferences for the name? <something>_MASK I guess, but I
> don't know what the correct name for the 14 bit frame number should be.
Maybe you can use DWC3_DSTS_SOFFN(~0) as a mask.
BR,
Thinh