[PATCH V2 2/4] clk: imx: pll14xx: use readl to force write completed

[Peng Fan]

From: Peng Fan <peng.fan@xxxxxxx>

To ensure writes to clock registers have properly completed,
add a readl after writel_relaxed. Then we could make sure
when udelay, write has been completed.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
---
 drivers/clk/imx/clk-pll14xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 5b7d41d43b3b..a8af949f0848 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -205,6 +205,12 @@ static int clk_pll1416x_set_rate(struct clk_hw *hw, unsigned long drate,
 		(rate->sdiv << SDIV_SHIFT);
 	writel_relaxed(div_val, pll->base + 0x4);
 
+	/*
+	 * readl will force write completed. There is a udelay below,
+	 * we need make sure before udelay, write has been completed
+	 */
+	readl(pll->base + 0x4);
+
 	/*
 	 * According to SPEC, t3 - t2 need to be greater than
 	 * 1us and 1/FREF, respectively.
-- 
2.16.4