[PATCH v2 net-next 1/7] net: stmmac: Do not set RX IC bit if RX Coalesce is zero

[Jose Abreu]

We may only want to use the RX Watchdog so lets check if RX Coalesce
settings are non-zero and only set the RX Interrupt on Completion bit if
its not.

Signed-off-by: Jose Abreu <Jose.Abreu@xxxxxxxxxxxx>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxx>
Cc: Jose Abreu <joabreu@xxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 39b4efd521f9..7939ef7e23b7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3440,7 +3440,11 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
 		rx_q->rx_count_frames += priv->rx_coal_frames;
 		if (rx_q->rx_count_frames > priv->rx_coal_frames)
 			rx_q->rx_count_frames = 0;
-		use_rx_wd = priv->use_riwt && rx_q->rx_count_frames;
+
+		use_rx_wd = !priv->rx_coal_frames;
+		use_rx_wd |= rx_q->rx_count_frames > 0;
+		if (!priv->use_riwt)
+			use_rx_wd = false;
 
 		dma_wmb();
 		stmmac_set_rx_owner(priv, p, use_rx_wd);
-- 
2.7.4