Re: [PATCH] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron

From: Heiko Stuebner
Date: Thu Nov 14 2019 - 08:45:35 EST

Next message: Liang, Kan: "Re: [PATCH v3 10/10] perf/cgroup: Do not switch system-wide events in cgroup switch"
Previous message: Frederic Barrat: "Re: [PATCH 08/10] nvdimm: Add driver for OpenCAPI Storage Class Memory"
In reply to: Abhishek Pandit-Subedi: "[PATCH] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron"
Next in thread: Doug Anderson: "Re: [PATCH] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

Am Dienstag, 12. November 2019, 01:47:00 CET schrieb Abhishek Pandit-Subedi:
> This enables the Broadcom uart bluetooth driver on uart0 and gives it
> ownership of its gpios. In order to use this, you must enable the
> following kconfig options:
> - CONFIG_BT_HCIUART_BCM
> - CONFIG_SERIAL_DEV
>
> This is applicable to rk3288-veyron series boards that use the bcm43540
> wifi+bt chips.
>
> As part of this change, also refactor the pinctrl across the various
> boards. All the boards using broadcom bluetooth shouldn't touch the
> bt_dev_wake pin.
>
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>

looks good to me
@dianders: does this look ok to you too?

Just to confirm, I guess mickey and brain do not have the suspend_l pin
settings? [They only seem to get the default pinctrl state but not the
sleep state in @pinctrl]

Thanks
Heiko

> ---
>
> This patch enables using the Broadcom HCI UART driver with the
> BCM43540 Wi-Fi + Bluetooth chip. This chip is used on a RK3288 based
> board (Veyron) and these changes have been tested on the Minnie variant
> of the board (i.e. rk3288-veyron-minnie.dts).
>
> The changes are applicable to the minnie, mickey, speedy and brain
> variants (all of which use the Broadcom chips). The bt-activity node was
> removed for all Veyron boards and shouldn't affect the boards using
> Marvell chips since they aren't using this out-of-band wakeup gpio.
>
> A previous portion of this series adding the compatible string to the
> hci_bcm driver has already been merged into bluetooth-next:
> https://lore.kernel.org/r/4680AA6A-599F-4D5E-9A96-0655569BAE94@xxxxxxxxxxxx
>
> There is also an ongoing series to fix up the baudrate settings and
> configure the PCM parameters on bluetooth-next:
> https://lore.kernel.org/linux-bluetooth/20191112001949.136377-1-abhishekpandit@xxxxxxxxxxxx/
>
>
> arch/arm/boot/dts/rk3288-veyron-brain.dts | 9 +++
> .../dts/rk3288-veyron-broadcom-bluetooth.dtsi | 26 ++++++++
> .../boot/dts/rk3288-veyron-chromebook.dtsi | 21 -------
> arch/arm/boot/dts/rk3288-veyron-fievel.dts | 2 -
> arch/arm/boot/dts/rk3288-veyron-jaq.dts | 22 +++++++
> arch/arm/boot/dts/rk3288-veyron-jerry.dts | 22 +++++++
> arch/arm/boot/dts/rk3288-veyron-mickey.dts | 9 +++
> arch/arm/boot/dts/rk3288-veyron-minnie.dts | 21 +++++++
> arch/arm/boot/dts/rk3288-veyron-pinky.dts | 22 +++++++
> arch/arm/boot/dts/rk3288-veyron-speedy.dts | 21 +++++++
> arch/arm/boot/dts/rk3288-veyron.dtsi | 59 +++----------------
> 11 files changed, 159 insertions(+), 75 deletions(-)
> create mode 100644 arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
>
> diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
> index 406146cbff29..aa33d09184ad 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
> @@ -7,6 +7,7 @@
>
> /dts-v1/;
> #include "rk3288-veyron.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
>
> / {
> model = "Google Brain";
> @@ -40,6 +41,14 @@
> };
>
> &pinctrl {
> + pinctrl-names = "default";
> + pinctrl-0 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> + >;
> +
> hdmi {
> vcc50_hdmi_en: vcc50-hdmi-en {
> rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
> new file mode 100644
> index 000000000000..ffa14049c3b5
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
> + * chip.
> + *
> + * Copyright 2019 Google, Inc
> + */
> +
> +&uart0 {
> + bluetooth {
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
> + <&bt_dev_wake>;
> +
> + compatible = "brcm,bcm43540-bt";
> + host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
> + shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
> + device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> + max-speed = <3000000>;
> +
> + brcm,bt-sco-routing = [01];
> + brcm,pcm-interface-rate = [02];
> + brcm,pcm-sync-mode = [01];
> + brcm,pcm-clock-mode = [01];
> + };
> +};
> diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> index ffb60f880b39..05112c25176d 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> @@ -136,27 +136,6 @@
> };
>
> &pinctrl {
> - pinctrl-0 = <
> - /* Common for sleep and wake, but no owners */
> - &ddr0_retention
> - &ddrio_pwroff
> - &global_pwroff
> -
> - /* Wake only */
> - &suspend_l_wake
> - &bt_dev_wake_awake
> - >;
> - pinctrl-1 = <
> - /* Common for sleep and wake, but no owners */
> - &ddr0_retention
> - &ddrio_pwroff
> - &global_pwroff
> -
> - /* Sleep only */
> - &suspend_l_sleep
> - &bt_dev_wake_sleep
> - >;
> -
> buttons {
> ap_lid_int_l: ap-lid-int-l {
> rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> index 9a0f55085839..7e7ef8e06b8d 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> @@ -18,8 +18,6 @@
> "google,veyron-fievel-rev0", "google,veyron-fievel",
> "google,veyron", "rockchip,rk3288";
>
> - /delete-node/ bt-activity;
> -
> vccsys: vccsys {
> compatible = "regulator-fixed";
> regulator-name = "vccsys";
> diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> index a4966e505a2f..171ba6185b6d 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> @@ -273,6 +273,28 @@
> };
>
> &pinctrl {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Wake only */
> + &suspend_l_wake
> + &bt_dev_wake_awake
> + >;
> + pinctrl-1 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Sleep only */
> + &suspend_l_sleep
> + &bt_dev_wake_sleep
> + >;
> +
> buck-5v {
> drv_5v: drv-5v {
> rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
> index a6ee44f0fe13..66f00d28801a 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
> @@ -418,6 +418,28 @@
> };
>
> &pinctrl {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Wake only */
> + &suspend_l_wake
> + &bt_dev_wake_awake
> + >;
> + pinctrl-1 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Sleep only */
> + &suspend_l_sleep
> + &bt_dev_wake_sleep
> + >;
> +
> buck-5v {
> drv_5v: drv-5v {
> rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> index 06a6a9554c48..ffd1121d19be 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> @@ -7,6 +7,7 @@
>
> /dts-v1/;
> #include "rk3288-veyron.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
>
> / {
> model = "Google Mickey";
> @@ -411,6 +412,14 @@
> };
>
> &pinctrl {
> + pinctrl-names = "default";
> + pinctrl-0 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> + >;
> +
> hdmi {
> power_hdmi_on: power-hdmi-on {
> rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> index c833716dbe48..39f76e02875f 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> @@ -7,6 +7,7 @@
>
> /dts-v1/;
> #include "rk3288-veyron-chromebook.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
>
> / {
> model = "Google Minnie";
> @@ -344,6 +345,26 @@
> };
>
> &pinctrl {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Wake only */
> + &suspend_l_wake
> + >;
> + pinctrl-1 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Sleep only */
> + &suspend_l_sleep
> + >;
> +
> buck-5v {
> drv_5v: drv-5v {
> rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
> index f420499f300a..71e6629cc208 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
> @@ -64,6 +64,28 @@
> };
>
> &pinctrl {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Wake only */
> + &suspend_l_wake
> + &bt_dev_wake_awake
> + >;
> + pinctrl-1 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Sleep only */
> + &suspend_l_sleep
> + &bt_dev_wake_sleep
> + >;
> +
> /delete-node/ lcd;
>
> backlight {
> diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> index 2f2989bc3f9c..e354c61a45e7 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> @@ -7,6 +7,7 @@
>
> /dts-v1/;
> #include "rk3288-veyron-chromebook.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
> #include "cros-ec-sbs.dtsi"
>
> / {
> @@ -279,6 +280,26 @@
> };
>
> &pinctrl {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Wake only */
> + &suspend_l_wake
> + >;
> + pinctrl-1 = <
> + /* Common for sleep and wake, but no owners */
> + &ddr0_retention
> + &ddrio_pwroff
> + &global_pwroff
> +
> + /* Sleep only */
> + &suspend_l_sleep
> + >;
> +
> buck-5v {
> drv_5v: drv-5v {
> rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
> index 7525e3dd1fc1..54a6838d73f5 100644
> --- a/arch/arm/boot/dts/rk3288-veyron.dtsi
> +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
> @@ -23,30 +23,6 @@
> reg = <0x0 0x0 0x0 0x80000000>;
> };
>
> - bt_activity: bt-activity {
> - compatible = "gpio-keys";
> - pinctrl-names = "default";
> - pinctrl-0 = <&bt_host_wake>;
> -
> - /*
> - * HACK: until we have an LPM driver, we'll use an
> - * ugly GPIO key to allow Bluetooth to wake from S3.
> - * This is expected to only be used by BT modules that
> - * use UART for comms. For BT modules that talk over
> - * SDIO we should use a wakeup mechanism related to SDIO.
> - *
> - * Use KEY_RESERVED here since that will work as a wakeup but
> - * doesn't get reported to higher levels (so doesn't confuse
> - * Chrome).
> - */
> - bt-wake {
> - label = "BT Wakeup";
> - gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
> - linux,code = <KEY_RESERVED>;
> - wakeup-source;
> - };
> -
> - };
>
> power_button: power-button {
> compatible = "gpio-keys";
> @@ -82,22 +58,17 @@
> clocks = <&rk808 RK808_CLKOUT1>;
> clock-names = "ext_clock";
> pinctrl-names = "default";
> - pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
> + pinctrl-0 = <&wifi_enable_h>;
>
> /*
> - * Depending on the actual card populated GPIO4 D4 and D5
> + * Depending on the actual card populated GPIO4 D4
> * correspond to one of these signals on the module:
> *
> * D4:
> * - SDIO_RESET_L_WL_REG_ON
> * - PDN (power down when low)
> - *
> - * D5:
> - * - BT_I2S_WS_BT_RFDISABLE_L
> - * - No connect
> */
> - reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
> - <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
> };
>
> vcc_5v: vcc-5v {
> @@ -481,26 +452,6 @@
> };
>
> &pinctrl {
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <
> - /* Common for sleep and wake, but no owners */
> - &ddr0_retention
> - &ddrio_pwroff
> - &global_pwroff
> -
> - /* Wake only */
> - &bt_dev_wake_awake
> - >;
> - pinctrl-1 = <
> - /* Common for sleep and wake, but no owners */
> - &ddr0_retention
> - &ddrio_pwroff
> - &global_pwroff
> -
> - /* Sleep only */
> - &bt_dev_wake_sleep
> - >;
> -
> pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
> bias-disable;
> drive-strength = <8>;
> @@ -622,6 +573,10 @@
> bt_dev_wake_awake: bt-dev-wake-awake {
> rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
> };
> +
> + bt_dev_wake: bt-dev-wake {
> + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> };
>
> tpm {
>

Next message: Liang, Kan: "Re: [PATCH v3 10/10] perf/cgroup: Do not switch system-wide events in cgroup switch"
Previous message: Frederic Barrat: "Re: [PATCH 08/10] nvdimm: Add driver for OpenCAPI Storage Class Memory"
In reply to: Abhishek Pandit-Subedi: "[PATCH] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron"
Next in thread: Doug Anderson: "Re: [PATCH] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]