Re: [PATCH v2 2/2] ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs

[Andrew Lunn]

On Thu, Nov 14, 2019 at 12:02:53PM +0100, Rasmus Villemoes wrote:
> From: Vladimir Oltean <olteanv@xxxxxxxxx>
> 
> On the LS1021A-TSN board, the 2 Atheros AR8031 PHYs for eth0 and eth1
> have interrupt lines connected to the shared IRQ2_B LS1021A pin.
> 
> Switching to interrupts offloads the PHY library from the task of
> polling the MDIO status and AN registers (1, 4, 5) every second.
> 
> Unfortunately, the BCM5464R quad PHY connected to the switch does not
> appear to have an interrupt line routed to the SoC.
> 
> Signed-off-by: Vladimir Oltean <olteanv@xxxxxxxxx>
> Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew