[PATCH v7 3/3] PCI: artpec6: Configure FTS with dwc helper function

[Dilip Kota]

Use DesignWare helper functions to configure Fast Training
Sequence. Drop the respective code in the driver.

Signed-off-by: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
Reviewed-by: Andrew Murray <andrew.murray@xxxxxxx>
---
Changes on v7:
	No change

Changes on v6:
	Typo fix:s/DesugnWare/DesignWare
	Update 'Utilize DesignWare' --> 'Use DesignWare'
	Add Reviewed-by: Andrew Murray <andrew.murray@xxxxxxx>

 drivers/pci/controller/dwc/pcie-artpec6.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
index d00252bd8fae..02d93b8c7942 100644
--- a/drivers/pci/controller/dwc/pcie-artpec6.c
+++ b/drivers/pci/controller/dwc/pcie-artpec6.c
@@ -51,9 +51,6 @@ static const struct of_device_id artpec6_pcie_of_match[];
 #define ACK_N_FTS_MASK			GENMASK(15, 8)
 #define ACK_N_FTS(x)			(((x) << 8) & ACK_N_FTS_MASK)
 
-#define FAST_TRAINING_SEQ_MASK		GENMASK(7, 0)
-#define FAST_TRAINING_SEQ(x)		(((x) << 0) & FAST_TRAINING_SEQ_MASK)
-
 /* ARTPEC-6 specific registers */
 #define PCIECFG				0x18
 #define  PCIECFG_DBG_OEN		BIT(24)
@@ -313,10 +310,7 @@ static void artpec6_pcie_set_nfts(struct artpec6_pcie *artpec6_pcie)
 	 * Set the Number of Fast Training Sequences that the core
 	 * advertises as its N_FTS during Gen2 or Gen3 link training.
 	 */
-	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-	val &= ~FAST_TRAINING_SEQ_MASK;
-	val |= FAST_TRAINING_SEQ(180);
-	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+	dw_pcie_link_set_n_fts(pci, 180);
 }
 
 static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
-- 
2.11.0