[PATCH 0/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
From: Mason Yang
Date: Fri Nov 15 2019 - 03:58:40 EST
Hello,
This is repost of patchset from Boris Brezillon's
[RFC,00/18] mtd: spi-nor: Proposal for 8-8-8 mode support [1].
Background from cover letter for RFC[1].
The trend has been around Octal NOR Flash lately and the latest mainline
already supports 1-1-8 and 1-8-8 modes.
Boris opened a discussion on how we should support stateful modes (X-X-X
and XD-XD-XD, where X is the bus width and D means Double Transfer Rate).
JESD216C has defined specification for Octal 8-8-8 and 8D-8D-8D.
It defined command and command extension in
JEDEC Basic Flash Parameter Table(18th DWORD) as well as how to
enable 8-8-8/8D-8D-8D mode sequences (Write CFG Reg 2).
The first set of patches is according to JESD216C adding Double Transfer
Rate(DTR) fields, extension command and command bytes number to the
spi_mem_op struct.
The second set of patches define the relevant macrons and enum in spi-nor
layer for Octal 8-8-8 and 8D-8D-8D mode operation.
The last set of patches in the series are modifying spi_nor_fixups hook to
tweak flash parameters for spi_nor_read/pp_setting() and then in a
chip-specific way to enter 8-8-8 or 8D-8D-8D modes on a Macronix chip.
Also patched spi-mxic driver for testing on Macronix's Zynq PicoZed board
with Macronix's SPI controller (spi-mxic.c) and mx25uw51245g Octal flash.
[1] https://patchwork.ozlabs.org/cover/982926/
thnaks for your time and review.
best regards,
Mason
Mason Yang (4):
spi: spi-mem: Add support for Octal 8D-8D-8D mode
mtd: spi-nor: Add support for Octal 8D-8D-8D mode
mtd: spi-nor: Add Octal 8D-8D-8D mode support for Macronix
mx25uw51245g
spi: mxic: Add support for Octal 8D-8D-8D mode
drivers/mtd/spi-nor/spi-nor.c | 273 +++++++++++++++++++++++++++++++++++++++++-
drivers/spi/spi-mem.c | 8 +-
drivers/spi/spi-mxic.c | 98 ++++++++++-----
include/linux/mtd/spi-nor.h | 61 +++++++++-
include/linux/spi/spi-mem.h | 13 ++
5 files changed, 410 insertions(+), 43 deletions(-)
--
1.9.1