[PATCH v4 3/4] dt-bindings: Add binding for IT6505.

[allen]

From: Allen Chen <allen.chen@xxxxxxxxxx>

Add a DT binding documentation for IT6505.

Signed-off-by: Allen Chen <allen.chen@xxxxxxxxxx>
Signed-off-by: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
---
 .../bindings/display/bridge/ite,it6505.txt         | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
new file mode 100644
index 00000000..72da0c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
@@ -0,0 +1,28 @@
+iTE it6505 DP bridge bindings
+
+Required properties:
+        - compatible: "ite,it6505"
+        - reg: i2c address of the bridge
+        - ovdd-supply: I/O voltage
+        - pwr18-supply: Core voltage
+        - interrupts: interrupt specifier of INT pin
+        - reset-gpios: gpio specifier of RESET pin
+	- hpd-gpios:
+		Hotplug detect GPIO.
+		Indicates which GPIO should be used for hotplug detection
+	- port@[x]: SoC specific port nodes with endpoint definitions as defined
+		in Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+
+Example:
+	dp-bridge@5c {
+                compatible = "ite,it6505";
+                interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
+                reg = <0x5c>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&it6505_pins>;
+                ovdd-supply = <&mt6358_vsim1_reg>;
+                pwr18-supply = <&it6505_pp18_reg>;
+                reset-gpios = <&pio 179 1>;
+                hpd-gpios = <&pio 9 0>;
+                extcon = <&usbc_extcon>;
+        };
-- 
1.9.1