[PATCH] dt-bindings: mailbox: convert stm32-ipcc to json-schema

[Arnaud Pouliquen]

Convert the STM32 IPCC bindings to DT schema format using
json-schema

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
---
 .../bindings/mailbox/st,stm32-ipcc.yaml       | 91 +++++++++++++++++++
 .../bindings/mailbox/stm32-ipcc.txt           | 47 ----------
 2 files changed, 91 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt

diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
new file mode 100644
index 000000000000..6843d51d96da
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: STM32 GPIO and Pin Mux/Config controller
+
+description: |
+  The IPCC block provides a non blocking signaling mechanism to post and
+  retrieve messages in an atomic way between two processors.
+  It provides the signaling for N bidirectionnal channels. The number of
+  channels (N) can be read from a dedicated register.
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@xxxxxx>
+  - Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
+
+properties:
+  compatible:
+    const: st,stm32mp1-ipcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+     maxItems: 1
+
+  interrupts:
+    items:
+      - description: rx channel occupied
+      - description: tx channel free
+      - description: wakeup source
+    minItems: 2
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      enums: [ rx, tx, wakeup ]
+    minItems: 2
+    maxItems: 3
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables wake up of host system on wakeup IRQ assertion.
+
+  "#mbox-cells":
+    const: 1
+
+  st,proc-id:
+    description: Processor id using the mailbox (0 or 1)
+    allOf:
+      - minimum: 0
+      - maximum: 1
+      - default: 0
+
+required:
+  - compatible
+  - reg
+  - st,proc-id
+  - clocks
+  - interrupt-names
+  - "#mbox-cells"
+
+oneOf:
+  - required:
+      - interrupts
+  - required:
+      - interrupts-extended
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    ipcc: mailbox@4c001000 {
+      compatible = "st,stm32mp1-ipcc";
+      #mbox-cells = <1>;
+      reg = <0x4c001000 0x400>;
+      st,proc-id = <0>;
+      interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
+      		      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
+      		      <&aiec 62 1>;
+      interrupt-names = "rx", "tx", "wakeup";
+      clocks = <&rcc_clk IPCC>;
+      wakeup-source;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt b/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
deleted file mode 100644
index 1d2b7fee7b85..000000000000
--- a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* STMicroelectronics STM32 IPCC (Inter-Processor Communication Controller)
-
-The IPCC block provides a non blocking signaling mechanism to post and
-retrieve messages in an atomic way between two processors.
-It provides the signaling for N bidirectionnal channels. The number of channels
-(N) can be read from a dedicated register.
-
-Required properties:
-- compatible:   Must be "st,stm32mp1-ipcc"
-- reg:          Register address range (base address and length)
-- st,proc-id:   Processor id using the mailbox (0 or 1)
-- clocks:       Input clock
-- interrupt-names: List of names for the interrupts described by the interrupt
-                   property. Must contain the following entries:
-                   - "rx"
-                   - "tx"
-                   - "wakeup"
-- interrupts:   Interrupt specifiers for "rx channel occupied", "tx channel
-                free" and "system wakeup".
-- #mbox-cells:  Number of cells required for the mailbox specifier. Must be 1.
-                The data contained in the mbox specifier of the "mboxes"
-                property in the client node is the mailbox channel index.
-
-Optional properties:
-- wakeup-source: Flag to indicate whether this device can wake up the system
-
-
-
-Example:
-	ipcc: mailbox@4c001000 {
-		compatible = "st,stm32mp1-ipcc";
-		#mbox-cells = <1>;
-		reg = <0x4c001000 0x400>;
-		st,proc-id = <0>;
-		interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-				      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-				      <&aiec 62 1>;
-		interrupt-names = "rx", "tx", "wakeup";
-		clocks = <&rcc_clk IPCC>;
-		wakeup-source;
-	}
-
-Client:
-	mbox_test {
-		...
-		mboxes = <&ipcc 0>, <&ipcc 1>;
-	};
-- 
2.17.1