Re: [PATCH] rcu: Fix missed wakeup of exp_wq waiters

From: Paul E. McKenney
Date: Mon Nov 18 2019 - 12:24:06 EST

Next message: Vitaly Kuznetsov: "Re: [PATCH net, 1/2] hv_netvsc: Fix offset usage in netvsc_send_table()"
Previous message: Brice Goglin: "Re: [PATCH V5 1/4] ACPI: Support Generic Initiator only domains"
In reply to: Neeraj Upadhyay: "Re: [PATCH] rcu: Fix missed wakeup of exp_wq waiters"
Next in thread: Neeraj Upadhyay: "Re: [PATCH] rcu: Fix missed wakeup of exp_wq waiters"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Nov 18, 2019 at 04:41:47PM +0000, Neeraj Upadhyay wrote:
> Hi Paul,
>
>
> On 11/18/2019 8:38 PM, Paul E. McKenney wrote:
> > On Mon, Nov 18, 2019 at 09:28:39AM +0000, Neeraj Upadhyay wrote:
> > > Hi Paul,
> > >
> > > On 11/18/2019 3:06 AM, Paul E. McKenney wrote:
> > > > On Fri, Nov 15, 2019 at 10:58:14PM +0530, Neeraj Upadhyay wrote:
> > > > > For the tasks waiting in exp_wq inside exp_funnel_lock(),
> > > > > there is a chance that they might be indefinitely blocked
> > > > > in below scenario:
> > > > >
> > > > > 1. There is a task waiting on exp sequence 0b'100' inside
> > > > > exp_funnel_lock().
> > > > >
> > > > > _synchronize_rcu_expedited()
> > > >
> > > > This symbol went away a few versions back, but let's see how this
> > > > plays out in current -rcu.
> > > >
> > >
> > > Sorry; for us this problem is observed on 4.19 stable version; I had
> > > checked against the -rcu code, and the relevant portions were present
> > > there.
> > >
> > > > > s = 0b'100
> > > > > exp_funnel_lock()
> > > > > wait_event(rnp->exp_wq[rcu_seq_ctr(s) & 0x3]
> > > >
> > > > All of the above could still happen if the expedited grace
> > > > period number was zero (or a bit less) when that task invoked
> > >
> > > Yes
> > >
> > > > synchronize_rcu_expedited(). What is the relation, if any,
> > > > between this task and "task1" below? Seems like you want them to
> > > > be different tasks.
> > > >
> > >
> > > This task is the one which is waiting for the expedited sequence, which
> > > "task1" completes ("task1" holds the exp_mutex for it). "task1" would
> > > wake up this task, on exp GP completion.
> > >
> > > > Does this task actually block, or is it just getting ready
> > > > to block? Seems like you need it to have actually blocked.
> > > >
> > >
> > > Yes, it actually blocked in wait queue.
> > >
> > > > > 2. The Exp GP completes and task (task1) holding exp_mutex queues
> > > > > worker and schedules out.
> > > >
> > > > "The Exp GP" being the one that was initiated when the .expedited_sequence
> > > > counter was zero, correct? (Looks that way below.)
> > > >
> > > Yes, correct.
> > >
> > > > > _synchronize_rcu_expedited()
> > > > > s = 0b'100
> > > > > queue_work(rcu_gp_wq, &rew.rew_work)
> > > > > wake_up_worker()
> > > > > schedule()
> > > > >
> > > > > 3. kworker A picks up the queued work and completes the exp gp
> > > > > sequence.
> > > > >
> > > > > rcu_exp_wait_wake()
> > > > > rcu_exp_wait_wake()
> > > > > rcu_exp_gp_seq_end(rsp) // rsp->expedited_sequence is incremented
> > > > > // to 0b'100'
> > > > >
> > > > > 4. task1 does not enter wait queue, as sync_exp_work_done() returns true,
> > > > > and releases exp_mutex.
> > > > >
> > > > > wait_event(rnp->exp_wq[rcu_seq_ctr(s) & 0x3],
> > > > > sync_exp_work_done(rsp, s));
> > > > > mutex_unlock(&rsp->exp_mutex);
> > > >
> > > > So task1 is the one that initiated the expedited grace period that
> > > > started when .expedited_sequence was zero, right?
> > > >
> > >
> > > Yes, right.
> > >
> > > > > 5. Next exp GP completes, and sequence number is incremented:
> > > > >
> > > > > rcu_exp_wait_wake()
> > > > > rcu_exp_wait_wake()
> > > > > rcu_exp_gp_seq_end(rsp) // rsp->expedited_sequence = 0b'200'
> > > > >
> > > > > 6. As kworker A uses current expedited_sequence, it wakes up workers
> > > > > from wrong wait queue index - it should have worken wait queue
> > > > > corresponding to 0b'100' sequence, but wakes up the ones for
> > > > > 0b'200' sequence. This results in task at step 1 indefinitely blocked.
> > > > >
> > > > > rcu_exp_wait_wake()
> > > > > wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rsp->expedited_sequence) & 0x3]);
> > > >
> > > > So the issue is that the next expedited RCU grace period might
> > > > have completed before the completion of the wakeups for the previous
> > > > expedited RCU grace period, correct? Then expedited grace periods have
> > >
> > > Yes. Actually from the ftraces, I saw that next expedited RCU grace
> > > period completed while kworker A was in D state, while waiting for
> > > exp_wake_mutex. This led to kworker A using sequence 2 (instead of 1) for
> > > its wake_up_all() call; so, task (point 1) was never woken up, as it was
> > > waiting on wq index 1.
> > >
> > > > to have stopped to prevent any future wakeup from happening, correct?
> > > > (Which would make it harder for rcutorture to trigger this, though it
> > > > really does have code that attempts to trigger this sort of thing.)
> > > >
> > > > Is this theoretical in nature, or have you actually triggered it?
> > > > If actually triggered, what did you do to make this happen?
> > >
> > > This issue, we had seen previously - 1 instance in May 2018 (on 4.9 kernel),
> > > another instance in Nov 2018 (on 4.14 kernel), in our customer reported
> > > issues. Both instances were in downstream drivers and we didn't have RCU
> > > traces. Now 2 days back, it was reported on 4.19 kernel, with RCU traces
> > > enabled, where it was observed in suspend scenario, where we are observing
> > > "DPM device timeout" [1], as scsi device is stuck in
> > > _synchronize_rcu_expedited().
> > >
> > > schedule+0x70/0x90
> > > _synchronize_rcu_expedited+0x590/0x5f8
> > > synchronize_rcu+0x50/0xa0
> > > scsi_device_quiesce+0x50/0x120
> > > scsi_bus_suspend+0x70/0xe8
> > > dpm_run_callback+0x148/0x388
> > > __device_suspend+0x430/0x8a8
> > >
> > > [1]
> > > https://github.com/torvalds/linux/blob/master/drivers/base/power/main.c#L489
> > >
> > > > What have you done to test the change?
> > > >
> > >
> > > I have given this for testing; will share the results . Current analysis
> > > and patch is based on going through ftrace and code review.
> >
> > OK, very good. Please include the failure information in the changelog
> > of the next version of this patch.
> >
> > I prefer your original patch, that just uses "s", over the one below
> > that moves the rcu_exp_gp_seq_end(). The big advantage of your original
> > patch is that it allow more concurrency between a consecutive pair of
> > expedited RCU grace periods. Plus it would not be easy to convince
> > myself that moving rcu_exp_gp_seq_end() down is safe, so your original
> > is also conceptually simpler with a more manageable state space.
> >
> > Please also add the WARN_ON(), though at first glance your change seems
> > to have lost the wakeup. (But it is early, so maybe it is just that I
> > am not yet fully awake.)
>
> My bad, I posted incomplete diff in previous mail:
>
> static void rcu_exp_wait_wake(struct rcu_state *rsp, unsigned long s)
> {
> struct rcu_node *rnp;
> + unsigned long exp_low;
> + unsigned long s_low = rcu_seq_ctr(s) & 0x3;
>
> synchronize_sched_expedited_wait(rsp);
> rcu_exp_gp_seq_end(rsp);
> @@ -613,7 +615,9 @@ static void rcu_exp_wait_wake(struct rcu_state *rsp,
> unsigned long s)
> spin_unlock(&rnp->exp_lock);
> }
> smp_mb(); /* All above changes before wakeup. */
> - wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rsp->expedited_sequence) & 0x3]);
> + exp_low = rcu_seq_ctr(rsp->expedited_sequence) & 0x3;
> + WARN_ON(s_low != exp_low);
> + wake_up_all(&rnp->exp_wq[exp_low]);

Much better!

But I suggest using s_low in the wake_up_all. This hunk is of course
only for testing purposes, not for actual inclusion. (My earlier email
didn't make that clear.)

Thanx, Paul

> }
>
>
> Thanks
> Neeraj
>
> >
> > Thanx, Paul
> >
> > > I was thinking of another way of addressing this problem: Doing exp seq end
> > > inside exp_wake_mutex. This will also ensure that, if we extend the current
> > > scenario and there are multiple expedited GP sequence, which have completed,
> > > before exp_wake_mutex is held, we need to preserve the requirement of 3 wq
> > > entries [2].
> > >
> > >
> > > [2] https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git/tree/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst?h=dev
> > >
> > >
> > > @@ -595,8 +595,6 @@ static void rcu_exp_wait_wake(struct rcu_state *rsp,
> > > unsigned long s)
> > > struct rcu_node *rnp;
> > >
> > > synchronize_sched_expedited_wait(rsp);
> > > - rcu_exp_gp_seq_end(rsp);
> > > - trace_rcu_exp_grace_period(rsp->name, s, TPS("end"));
> > >
> > > /*
> > > * Switch over to wakeup mode, allowing the next GP, but -only- the
> > > @@ -604,6 +602,9 @@ static void rcu_exp_wait_wake(struct rcu_state *rsp,
> > > unsigned long s)
> > > */
> > > mutex_lock(&rsp->exp_wake_mutex);
> > >
> > > + rcu_exp_gp_seq_end(rsp);
> > > + trace_rcu_exp_grace_period(rsp->name, s, TPS("end"));
> > > +
> > >
> > >
> > >
> > > > (Using a WARN_ON() to check for the lower bits of the counter portion
> > > > of rcu_state.expedited_sequence differing from the same bits of s
> > > > would be one way to detect this problem.)
> > > >
> > > > Thanx, Paul
> > > >
> > >
> > > I have also given the patch for this, for testing:
> > >
> > > static void rcu_exp_wait_wake(struct rcu_state *rsp, unsigned long s)
> > > {
> > > struct rcu_node *rnp;
> > > + unsigned long exp_low;
> > > + unsigned long s_low = rcu_seq_ctr(s) & 0x3;
> > >
> > > synchronize_sched_expedited_wait(rsp);
> > > rcu_exp_gp_seq_end(rsp);
> > > @@ -613,7 +615,9 @@ static void rcu_exp_wait_wake(struct rcu_state *rsp,
> > > unsigned long s)
> > > spin_unlock(&rnp->exp_lock);
> > > }
> > > smp_mb(); /* All above changes before wakeup. */
> > > - wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rsp->expedited_sequence) & 0x3]);
> > > + exp_low = rcu_seq_ctr(rsp->expedited_sequence) & 0x3;
> > > + WARN_ON(s_low != exp_low);
> > > +
> > >
> > > Thanks
> > > Neeraj
> > >
> > > > > Fix this by using the correct sequence number for wake_up_all() inside
> > > > > rcu_exp_wait_wake().
> > > > >
> > > > > Signed-off-by: Neeraj Upadhyay <neeraju@xxxxxxxxxxxxxx>
> > > > > ---
> > > > > kernel/rcu/tree_exp.h | 2 +-
> > > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
> > > > > index e4b77d3..28979d3 100644
> > > > > --- a/kernel/rcu/tree_exp.h
> > > > > +++ b/kernel/rcu/tree_exp.h
> > > > > @@ -557,7 +557,7 @@ static void rcu_exp_wait_wake(unsigned long s)
> > > > > spin_unlock(&rnp->exp_lock);
> > > > > }
> > > > > smp_mb(); /* All above changes before wakeup. */
> > > > > - wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rcu_state.expedited_sequence) & 0x3]);
> > > > > + wake_up_all(&rnp->exp_wq[rcu_seq_ctr(s) & 0x3]);
> > > > > }
> > > > > trace_rcu_exp_grace_period(rcu_state.name, s, TPS("endwake"));
> > > > > mutex_unlock(&rcu_state.exp_wake_mutex);
> > > > > --
> > > > > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
> > > > > member of the Code Aurora Forum, hosted by The Linux Foundation
> > > > >
> > >
> > > --
> > > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of
> > > the Code Aurora Forum, hosted by The Linux Foundation
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of
> the Code Aurora Forum, hosted by The Linux Foundation

Next message: Vitaly Kuznetsov: "Re: [PATCH net, 1/2] hv_netvsc: Fix offset usage in netvsc_send_table()"
Previous message: Brice Goglin: "Re: [PATCH V5 1/4] ACPI: Support Generic Initiator only domains"
In reply to: Neeraj Upadhyay: "Re: [PATCH] rcu: Fix missed wakeup of exp_wq waiters"
Next in thread: Neeraj Upadhyay: "Re: [PATCH] rcu: Fix missed wakeup of exp_wq waiters"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]