Re: [PATCH 3/3] ARM: dts: bcm2711: Enable HWRNG support

[Stefan Wahren]

Hi,

Am 18.11.19 um 12:44 schrieb Nicolas Saenz Julienne:
> Hi Stephen,
>
> On Sun, 2019-11-17 at 23:58 -0800, Stephen Brennan wrote:
>> From: Stefan Wahren <wahrenst@xxxxxxx>
>>
>> This enables hardware random number generator support for the BCM2711
>> on the Raspberry Pi 4 board.
>>
>> Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
>> Signed-off-by: Stephen Brennan <stephen@xxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/bcm2711.dtsi | 5 ++---
>>  1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
>> index ac83dac2e6ba..2c19e5de284a 100644
>> --- a/arch/arm/boot/dts/bcm2711.dtsi
>> +++ b/arch/arm/boot/dts/bcm2711.dtsi
>> @@ -92,10 +92,9 @@ pm: watchdog@7e100000 {
>>  		};
>>
>>  		rng@7e104000 {
>> +			compatible = "brcm,bcm2711-rng200";
>>  			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
>> -
>> -			/* RNG is incompatible with brcm,bcm2835-rng */
>> -			status = "disabled";
>> +			status = "okay";
>>  		};
>>
>>  		uart2: serial@7e201400 {
> We inherit the reg property from bcm283x.dtsi, on which we only define a size
> of 0x10 bytes. I gather from the driver that iproc-rng200's register space is
> at least 0x28 bytes big. We should also update the 'reg' property to:
>
> 	reg = <0x7e104000 0x28>;

Thanks for sending and noticing. A proper solution would be to move the
whole rng node from bcm283x.dtsi to bcm283x-common.dtsi and define a
completely new rng node in bcm2711.dtsi.

Regards
Stefan

>
> Regards,
> Nicolas
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel