Re: [PATCH v7 2/3] dwc: PCI: intel: PCIe RC controller driver

[Dilip Kota]

On 11/19/2019 12:40 AM, Jingoo Han wrote:
> ïOn 11/18/19, 2:58 AM, Dilip Kota wrote:
>
> > On 11/16/2019 4:40 AM, Jingoo Han wrote:
> > > On 11/14/19, 9:31 PM, Dilip Kota wrote:
> > >
> > > > Add support to PCIe RC controller on Intel Gateway SoCs.
> > > > PCIe controller is based of Synopsys DesignWare PCIe core.
> > > >
> > > > Intel PCIe driver requires Upconfigure support, Fast Training
> > > > Sequence and link speed configurations. So adding the respective
> > > > helper functions in the PCIe DesignWare framework.
> > > > It also programs hardware autonomous speed during speed
> > > > configuration so defining it in pci_regs.h.
> > > >
> > > > Signed-off-by: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
> > > > Reviewed-by: Andrew Murray <andrew.murray@xxxxxxx>
> > > > Acked-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
> > > > ---
> > > [.....]
> > >
> > > >    drivers/pci/controller/dwc/Kconfig           |  10 +
> > > >    drivers/pci/controller/dwc/Makefile          |   1 +
> > > >    drivers/pci/controller/dwc/pcie-designware.c |  57 +++
> > > >    drivers/pci/controller/dwc/pcie-designware.h |  12 +
> > > >    drivers/pci/controller/dwc/pcie-intel-gw.c   | 542 +++++++++++++++++++++++++++
> > > >    include/uapi/linux/pci_regs.h                |   1 +
> > > >    6 files changed, 623 insertions(+)
> > > >    create mode 100644 drivers/pci/controller/dwc/pcie-intel-gw.c
> > > >
> > > > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > > > index 0ba988b5b5bc..fb6d474477df 100644
> > > > --- a/drivers/pci/controller/dwc/Kconfig
> > > > +++ b/drivers/pci/controller/dwc/Kconfig
> > > > @@ -82,6 +82,16 @@ config PCIE_DW_PLAT_EP
> > > >    	  order to enable device-specific features PCI_DW_PLAT_EP must be
> > > >    	  selected.
> > > >    
> > > > +config PCIE_INTEL_GW
> > > > +	bool "Intel Gateway PCIe host controller support"
> > > > +	depends on OF && (X86 || COMPILE_TEST)
> > > > +	select PCIE_DW_HOST
> > > > +	help
> > > > +	  Say 'Y' here to enable PCIe Host controller support on Intel
> > > > +	  Gateway SoCs.
> > > > +	  The PCIe controller uses the DesignWare core plus Intel-specific
> > > > +	  hardware wrappers.
> > > > +
> > > Please add this config alphabetical order!
> > > So, this config should be after 'config PCI_IMX6'.
> > > There is no reason to put this config at the first place.
> > >
> > > >    config PCI_EXYNOS
> > > >    	bool "Samsung Exynos PCIe controller"
> > > >    	depends on SOC_EXYNOS5440 || COMPILE_TEST
> > > > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> > > > index b30336181d46..99db83cd2f35 100644
> > > > --- a/drivers/pci/controller/dwc/Makefile
> > > > +++ b/drivers/pci/controller/dwc/Makefile
> > > > @@ -3,6 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
> > > >    obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
> > > >    obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
> > > >    obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
> > > > +obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
> > > Ditto.
> > PCIE_INTEL_GW wouldnt come after PCI_IMX6, the complete Makefile and
> > Kconfig are not in order,( PCI_* and PCIE_* are not in any order). So i
> > just followed PCIE_DW and placed PCIE_INTEL_GW after PCIE_DW as I is
> > after D (and i see PCI_* immediately after the PCIE_DW*, so i placed
> > PCIE_INTEL_GW after PCIE_DW* and before PCI_*).
> Hey, although some of them are not in order, you don't have a right to do so.
> If some people do not follow the law, it does not mean that you can break the law.
> Anyway, if you don't follow an alphabetical order, my answer is NACK.
> Also, other people or I will send a patch to fix the order of other drivers.

I am not against following the order. I kept PCIE_INTEL_GW after 
PCIE_DW* by checking the best possible order.
As per the alphabetical order, i see all CONFIG_PCIE_* comes first and 
CONFIG_PCI_* follows. So, by following this, i placed PCIE_INTEL_GW 
after PCIE_DW* (for the same reason PCIE_INTEL_GW cannot be placed after 
PCI_IMX6).
Even after re-ordering the Kconfig and Makefile, still PCIE_INTEL_GW 
comes after PCIE_DW_PLAT( and PCIE_HISI_STB).

Regards,
Dilip

> > Regards,
> > Dilip
> > Best regards,
> > Jingoo Han
> >
> > >    obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
> > >    obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> > >    obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > > index 820488dfeaed..479e250695a0 100644
> > [.....]