[PATCH v2 0/4] tps6105x add devicetree and leds support

[Sven Van Asbroeck]

v1 -> v2:
	Select chip operational mode by looking at subnode name, _not_ its
	compatible property. Suggested by Mark Brown.

I needed led operation for this mfd chip, so I added a very simple
driver for this.

My platform (arm imx6q) is devicetree-based, so I added optional
devicetree support for this chip and its sub-drivers.

Interestingly, the main mfd driver had a dt 'compatible' binding, but
could not operate without platform data?

Sven Van Asbroeck (4):
  tps6105x: add optional devicetree support
  regulator: tps6105x: add optional devicetree support
  leds: tps6105x: add driver for mfd chip led mode
  dt-bindings: mfd: update TI tps6105x chip bindings

 .../devicetree/bindings/mfd/tps6105x.txt      | 42 ++++++++-
 drivers/leds/Kconfig                          | 10 +++
 drivers/leds/Makefile                         |  1 +
 drivers/leds/leds-tps6105x.c                  | 87 +++++++++++++++++++
 drivers/mfd/tps6105x.c                        | 34 +++++++-
 drivers/regulator/tps6105x-regulator.c        |  2 +
 include/linux/mfd/tps6105x.h                  |  1 +
 7 files changed, 173 insertions(+), 4 deletions(-)
 create mode 100644 drivers/leds/leds-tps6105x.c

-- 
2.17.1