[PATCH 1/2] pinctrl: ingenic: Handle PIN_CONFIG_OUTPUT config
From: Paul Cercueil
Date: Tue Nov 19 2019 - 10:52:22 EST
This makes the driver support the 'output-low' and 'output-high'
devicetree properties in gpio-hog sub-nodes.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
drivers/pinctrl/pinctrl-ingenic.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 6e2683016c1f..dbd907ef7cf0 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1801,19 +1801,30 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !enabled);
}
+static void ingenic_set_output_level(struct ingenic_pinctrl *jzpc,
+ unsigned int pin, bool high)
+{
+ if (jzpc->version >= ID_JZ4770)
+ ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PAT0, high);
+ else
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DATA, high);
+}
+
static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned int num_configs)
{
struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
unsigned int idx = pin % PINS_PER_GPIO_CHIP;
unsigned int offt = pin / PINS_PER_GPIO_CHIP;
- unsigned int cfg;
+ unsigned int cfg, arg;
+ int ret;
for (cfg = 0; cfg < num_configs; cfg++) {
switch (pinconf_to_config_param(configs[cfg])) {
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
+ case PIN_CONFIG_OUTPUT:
continue;
default:
return -ENOTSUPP;
@@ -1821,6 +1832,8 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
}
for (cfg = 0; cfg < num_configs; cfg++) {
+ arg = pinconf_to_config_argument(configs[cfg]);
+
switch (pinconf_to_config_param(configs[cfg])) {
case PIN_CONFIG_BIAS_DISABLE:
dev_dbg(jzpc->dev, "disable pull-over for pin P%c%u\n",
@@ -1844,6 +1857,14 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
ingenic_set_bias(jzpc, pin, true);
break;
+ case PIN_CONFIG_OUTPUT:
+ ret = pinctrl_gpio_direction_output(pin);
+ if (ret)
+ return ret;
+
+ ingenic_set_output_level(jzpc, pin, arg);
+ break;
+
default:
unreachable();
}
--
2.24.0