Re: [PATCH v2 1/3] drm/i915: Move the code to populate ACPI device ID into intel_acpi

From: Jani Nikula
Date: Wed Nov 20 2019 - 09:41:11 EST


On Mon, 04 Nov 2019, Rajat Jain <rajatja@xxxxxxxxxx> wrote:
> Move the code that populates the ACPI device ID for devices, into
> more appripriate intel_acpi.c. This is done in preparation for more
> users of this code (in next patch).

I don't think your use of the code makes sense (I'll explain in reply to
the other patches) but I could be persuaded to move the code to
intel_acpi.c.

> Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
> Change-Id: Ifb3bd458734985c2a78ba682e6f0a2e63e0626ca

Please drop Change-Ids.

> ---
> v2: v1 doesn't exist. Found existing code in i915 driver to assign the ACPI ID
> which is what I plan to re-use.
>
>
> drivers/gpu/drm/i915/display/intel_acpi.c | 87 +++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_acpi.h | 6 ++
> drivers/gpu/drm/i915/display/intel_opregion.c | 80 +----------------
> 3 files changed, 97 insertions(+), 76 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_acpi.c b/drivers/gpu/drm/i915/display/intel_acpi.c
> index 3456d33feb46..748d9b3125dd 100644
> --- a/drivers/gpu/drm/i915/display/intel_acpi.c
> +++ b/drivers/gpu/drm/i915/display/intel_acpi.c
> @@ -156,3 +156,90 @@ void intel_register_dsm_handler(void)
> void intel_unregister_dsm_handler(void)
> {
> }
> +
> +/*
> + * ACPI Specification, Revision 5.0, Appendix B.3.2 _DOD (Enumerate All Devices
> + * Attached to the Display Adapter).
> + */
> +#define ACPI_DISPLAY_INDEX_SHIFT 0
> +#define ACPI_DISPLAY_INDEX_MASK (0xf << 0)
> +#define ACPI_DISPLAY_PORT_ATTACHMENT_SHIFT 4
> +#define ACPI_DISPLAY_PORT_ATTACHMENT_MASK (0xf << 4)
> +#define ACPI_DISPLAY_TYPE_SHIFT 8
> +#define ACPI_DISPLAY_TYPE_MASK (0xf << 8)
> +#define ACPI_DISPLAY_TYPE_OTHER (0 << 8)
> +#define ACPI_DISPLAY_TYPE_VGA (1 << 8)
> +#define ACPI_DISPLAY_TYPE_TV (2 << 8)
> +#define ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL (3 << 8)
> +#define ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL (4 << 8)
> +#define ACPI_VENDOR_SPECIFIC_SHIFT 12
> +#define ACPI_VENDOR_SPECIFIC_MASK (0xf << 12)
> +#define ACPI_BIOS_CAN_DETECT (1 << 16)
> +#define ACPI_DEPENDS_ON_VGA (1 << 17)
> +#define ACPI_PIPE_ID_SHIFT 18
> +#define ACPI_PIPE_ID_MASK (7 << 18)
> +#define ACPI_DEVICE_ID_SCHEME (1ULL << 31)
> +
> +static u32 acpi_display_type(struct intel_connector *connector)
> +{
> + u32 display_type;
> +
> + switch (connector->base.connector_type) {
> + case DRM_MODE_CONNECTOR_VGA:
> + case DRM_MODE_CONNECTOR_DVIA:
> + display_type = ACPI_DISPLAY_TYPE_VGA;
> + break;
> + case DRM_MODE_CONNECTOR_Composite:
> + case DRM_MODE_CONNECTOR_SVIDEO:
> + case DRM_MODE_CONNECTOR_Component:
> + case DRM_MODE_CONNECTOR_9PinDIN:
> + case DRM_MODE_CONNECTOR_TV:
> + display_type = ACPI_DISPLAY_TYPE_TV;
> + break;
> + case DRM_MODE_CONNECTOR_DVII:
> + case DRM_MODE_CONNECTOR_DVID:
> + case DRM_MODE_CONNECTOR_DisplayPort:
> + case DRM_MODE_CONNECTOR_HDMIA:
> + case DRM_MODE_CONNECTOR_HDMIB:
> + display_type = ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL;
> + break;
> + case DRM_MODE_CONNECTOR_LVDS:
> + case DRM_MODE_CONNECTOR_eDP:
> + case DRM_MODE_CONNECTOR_DSI:
> + display_type = ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL;
> + break;
> + case DRM_MODE_CONNECTOR_Unknown:
> + case DRM_MODE_CONNECTOR_VIRTUAL:
> + display_type = ACPI_DISPLAY_TYPE_OTHER;
> + break;
> + default:
> + MISSING_CASE(connector->base.connector_type);
> + display_type = ACPI_DISPLAY_TYPE_OTHER;
> + break;
> + }
> +
> + return display_type;
> +}
> +
> +void intel_populate_acpi_ids_for_all_connectors(struct drm_device *drm_dev)

Plase use intel_foo_ prefix for functions in intel_foo.c,
i.e. intel_acpi_ here. Say, intel_acpi_device_id_update() or something.

Please always prefer struct drm_i915_private *i915 over struct
drm_device * pointers in i915 code.

> +{
> + struct intel_connector *connector;
> + struct drm_connector_list_iter conn_iter;
> + u8 display_index[16] = {};
> + u32 device_id, type;
> +
> + /* Populate the ACPI IDs for all connectors for a given drm_device */
> + drm_connector_list_iter_begin(drm_dev, &conn_iter);
> + for_each_intel_connector_iter(connector, &conn_iter) {
> +

Superfluous newline, the device_id and type local vars could be here as
in the original.

> + device_id = acpi_display_type(connector);
> +
> + /* Use display type specific display index. */
> + type = (device_id & ACPI_DISPLAY_TYPE_MASK)
> + >> ACPI_DISPLAY_TYPE_SHIFT;
> + device_id |= display_index[type]++ << ACPI_DISPLAY_INDEX_SHIFT;
> +
> + connector->acpi_device_id = device_id;
> + }
> + drm_connector_list_iter_end(&conn_iter);
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_acpi.h b/drivers/gpu/drm/i915/display/intel_acpi.h
> index 1c576b3fb712..8f6d850df6fa 100644
> --- a/drivers/gpu/drm/i915/display/intel_acpi.h
> +++ b/drivers/gpu/drm/i915/display/intel_acpi.h
> @@ -6,12 +6,18 @@
> #ifndef __INTEL_ACPI_H__
> #define __INTEL_ACPI_H__
>
> +#include "intel_display_types.h"
> +

Please prefer forward declarations over adding new includes.

struct drm_i915_private;

> #ifdef CONFIG_ACPI
> void intel_register_dsm_handler(void);
> void intel_unregister_dsm_handler(void);
> +void intel_populate_acpi_ids_for_all_connectors(struct drm_device *drm_dev);
> #else
> static inline void intel_register_dsm_handler(void) { return; }
> static inline void intel_unregister_dsm_handler(void) { return; }
> +static inline void
> +static inline void

Whoops.

> +intel_populate_acpi_ids_for_all_connectors(struct drm_device *drm_dev) { }
> #endif /* CONFIG_ACPI */
>
> #endif /* __INTEL_ACPI_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_opregion.c b/drivers/gpu/drm/i915/display/intel_opregion.c
> index 969ade623691..f5976a6ab3c4 100644
> --- a/drivers/gpu/drm/i915/display/intel_opregion.c
> +++ b/drivers/gpu/drm/i915/display/intel_opregion.c
> @@ -35,6 +35,7 @@
> #include "display/intel_panel.h"
>
> #include "i915_drv.h"
> +#include "intel_acpi.h"
> #include "intel_display_types.h"
> #include "intel_opregion.h"
>
> @@ -242,29 +243,6 @@ struct opregion_asle_ext {
> #define SWSCI_SBCB_POST_VBE_PM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
> #define SWSCI_SBCB_ENABLE_DISABLE_AUDIO SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)
>
> -/*
> - * ACPI Specification, Revision 5.0, Appendix B.3.2 _DOD (Enumerate All Devices
> - * Attached to the Display Adapter).
> - */
> -#define ACPI_DISPLAY_INDEX_SHIFT 0
> -#define ACPI_DISPLAY_INDEX_MASK (0xf << 0)
> -#define ACPI_DISPLAY_PORT_ATTACHMENT_SHIFT 4
> -#define ACPI_DISPLAY_PORT_ATTACHMENT_MASK (0xf << 4)
> -#define ACPI_DISPLAY_TYPE_SHIFT 8
> -#define ACPI_DISPLAY_TYPE_MASK (0xf << 8)
> -#define ACPI_DISPLAY_TYPE_OTHER (0 << 8)
> -#define ACPI_DISPLAY_TYPE_VGA (1 << 8)
> -#define ACPI_DISPLAY_TYPE_TV (2 << 8)
> -#define ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL (3 << 8)
> -#define ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL (4 << 8)
> -#define ACPI_VENDOR_SPECIFIC_SHIFT 12
> -#define ACPI_VENDOR_SPECIFIC_MASK (0xf << 12)
> -#define ACPI_BIOS_CAN_DETECT (1 << 16)
> -#define ACPI_DEPENDS_ON_VGA (1 << 17)
> -#define ACPI_PIPE_ID_SHIFT 18
> -#define ACPI_PIPE_ID_MASK (7 << 18)
> -#define ACPI_DEVICE_ID_SCHEME (1 << 31)
> -
> #define MAX_DSLP 1500
>
> static int swsci(struct drm_i915_private *dev_priv,
> @@ -662,54 +640,12 @@ static void set_did(struct intel_opregion *opregion, int i, u32 val)
> }
> }
>
> -static u32 acpi_display_type(struct intel_connector *connector)
> -{
> - u32 display_type;
> -
> - switch (connector->base.connector_type) {
> - case DRM_MODE_CONNECTOR_VGA:
> - case DRM_MODE_CONNECTOR_DVIA:
> - display_type = ACPI_DISPLAY_TYPE_VGA;
> - break;
> - case DRM_MODE_CONNECTOR_Composite:
> - case DRM_MODE_CONNECTOR_SVIDEO:
> - case DRM_MODE_CONNECTOR_Component:
> - case DRM_MODE_CONNECTOR_9PinDIN:
> - case DRM_MODE_CONNECTOR_TV:
> - display_type = ACPI_DISPLAY_TYPE_TV;
> - break;
> - case DRM_MODE_CONNECTOR_DVII:
> - case DRM_MODE_CONNECTOR_DVID:
> - case DRM_MODE_CONNECTOR_DisplayPort:
> - case DRM_MODE_CONNECTOR_HDMIA:
> - case DRM_MODE_CONNECTOR_HDMIB:
> - display_type = ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL;
> - break;
> - case DRM_MODE_CONNECTOR_LVDS:
> - case DRM_MODE_CONNECTOR_eDP:
> - case DRM_MODE_CONNECTOR_DSI:
> - display_type = ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL;
> - break;
> - case DRM_MODE_CONNECTOR_Unknown:
> - case DRM_MODE_CONNECTOR_VIRTUAL:
> - display_type = ACPI_DISPLAY_TYPE_OTHER;
> - break;
> - default:
> - MISSING_CASE(connector->base.connector_type);
> - display_type = ACPI_DISPLAY_TYPE_OTHER;
> - break;
> - }
> -
> - return display_type;
> -}
> -
> static void intel_didl_outputs(struct drm_i915_private *dev_priv)
> {
> struct intel_opregion *opregion = &dev_priv->opregion;
> struct intel_connector *connector;
> struct drm_connector_list_iter conn_iter;
> int i = 0, max_outputs;
> - int display_index[16] = {};
>
> /*
> * In theory, did2, the extended didl, gets added at opregion version
> @@ -721,20 +657,12 @@ static void intel_didl_outputs(struct drm_i915_private *dev_priv)
> max_outputs = ARRAY_SIZE(opregion->acpi->didl) +
> ARRAY_SIZE(opregion->acpi->did2);
>
> + intel_populate_acpi_ids_for_all_connectors(&dev_priv->drm);
> +

As the acpi_device_ids will be used elsewhere too, maybe this call needs
to be moved to a higher level and called on the resume path. *shrug*

BR,
Jani.

> drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> for_each_intel_connector_iter(connector, &conn_iter) {
> - u32 device_id, type;
> -
> - device_id = acpi_display_type(connector);
> -
> - /* Use display type specific display index. */
> - type = (device_id & ACPI_DISPLAY_TYPE_MASK)
> - >> ACPI_DISPLAY_TYPE_SHIFT;
> - device_id |= display_index[type]++ << ACPI_DISPLAY_INDEX_SHIFT;
> -
> - connector->acpi_device_id = device_id;
> if (i < max_outputs)
> - set_did(opregion, i, device_id);
> + set_did(opregion, i, connector->acpi_device_id);
> i++;
> }
> drm_connector_list_iter_end(&conn_iter);

--
Jani Nikula, Intel Open Source Graphics Center