Re: [PATCH] rcu: Fix missed wakeup of exp_wq waiters

From: Paul E. McKenney
Date: Wed Nov 20 2019 - 23:10:38 EST

On Wed, Nov 20, 2019 at 10:38:56AM +0530, Neeraj Upadhyay wrote:
>
>
> On 11/20/2019 1:36 AM, Paul E. McKenney wrote:
> > On Tue, Nov 19, 2019 at 07:09:31AM -0800, Paul E. McKenney wrote:
> > > On Tue, Nov 19, 2019 at 07:03:14AM +0000, Neeraj Upadhyay wrote:
> > > > Hi Paul,
> > > >
> > > > On 11/19/2019 9:35 AM, Paul E. McKenney wrote:
> > > > > On Tue, Nov 19, 2019 at 03:35:15AM +0000, Neeraj Upadhyay wrote:
> > > > > > Hi Paul,
> > > > > >
> > > > > > On 11/18/2019 10:54 PM, Paul E. McKenney wrote:
> > > > > > > On Mon, Nov 18, 2019 at 04:41:47PM +0000, Neeraj Upadhyay wrote:
> > > > > > > > Hi Paul,
> > > > > > > >
> > > > > > > >
> > > > > > > > On 11/18/2019 8:38 PM, Paul E. McKenney wrote:
> > > > > > > > > On Mon, Nov 18, 2019 at 09:28:39AM +0000, Neeraj Upadhyay wrote:
> > > > > > > > > > Hi Paul,
> > > > > > > > > >
> > > > > > > > > > On 11/18/2019 3:06 AM, Paul E. McKenney wrote:
> > > > > > > > > > > On Fri, Nov 15, 2019 at 10:58:14PM +0530, Neeraj Upadhyay wrote:
> > > > > > > > > > > > For the tasks waiting in exp_wq inside exp_funnel_lock(),
> > > > > > > > > > > > there is a chance that they might be indefinitely blocked
> > > > > > > > > > > > in below scenario:
> > > > > > > > > > > >
> > > > > > > > > > > > 1. There is a task waiting on exp sequence 0b'100' inside
> > > > > > > > > > > > exp_funnel_lock().
> > > > > > > > > > > >
> > > > > > > > > > > > _synchronize_rcu_expedited()
> > > > > > > > > > >
> > > > > > > > > > > This symbol went away a few versions back, but let's see how this
> > > > > > > > > > > plays out in current -rcu.
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Sorry; for us this problem is observed on 4.19 stable version; I had
> > > > > > > > > > checked against the -rcu code, and the relevant portions were present
> > > > > > > > > > there.
> > > > > > > > > >
> > > > > > > > > > > > s = 0b'100
> > > > > > > > > > > > exp_funnel_lock()
> > > > > > > > > > > > wait_event(rnp->exp_wq[rcu_seq_ctr(s) & 0x3]
> > > > > > > > > > >
> > > > > > > > > > > All of the above could still happen if the expedited grace
> > > > > > > > > > > period number was zero (or a bit less) when that task invoked
> > > > > > > > > >
> > > > > > > > > > Yes
> > > > > > > > > >
> > > > > > > > > > > synchronize_rcu_expedited(). What is the relation, if any,
> > > > > > > > > > > between this task and "task1" below? Seems like you want them to
> > > > > > > > > > > be different tasks.
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > This task is the one which is waiting for the expedited sequence, which
> > > > > > > > > > "task1" completes ("task1" holds the exp_mutex for it). "task1" would
> > > > > > > > > > wake up this task, on exp GP completion.
> > > > > > > > > >
> > > > > > > > > > > Does this task actually block, or is it just getting ready
> > > > > > > > > > > to block? Seems like you need it to have actually blocked.
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Yes, it actually blocked in wait queue.
> > > > > > > > > >
> > > > > > > > > > > > 2. The Exp GP completes and task (task1) holding exp_mutex queues
> > > > > > > > > > > > worker and schedules out.
> > > > > > > > > > >
> > > > > > > > > > > "The Exp GP" being the one that was initiated when the .expedited_sequence
> > > > > > > > > > > counter was zero, correct? (Looks that way below.)
> > > > > > > > > > >
> > > > > > > > > > Yes, correct.
> > > > > > > > > >
> > > > > > > > > > > > _synchronize_rcu_expedited()
> > > > > > > > > > > > s = 0b'100
> > > > > > > > > > > > queue_work(rcu_gp_wq, &rew.rew_work)
> > > > > > > > > > > > wake_up_worker()
> > > > > > > > > > > > schedule()
> > > > > > > > > > > >
> > > > > > > > > > > > 3. kworker A picks up the queued work and completes the exp gp
> > > > > > > > > > > > sequence.
> > > > > > > > > > > >
> > > > > > > > > > > > rcu_exp_wait_wake()
> > > > > > > > > > > > rcu_exp_wait_wake()
> > > > > > > > > > > > rcu_exp_gp_seq_end(rsp) // rsp->expedited_sequence is incremented
> > > > > > > > > > > > // to 0b'100'
> > > > > > > > > > > >
> > > > > > > > > > > > 4. task1 does not enter wait queue, as sync_exp_work_done() returns true,
> > > > > > > > > > > > and releases exp_mutex.
> > > > > > > > > > > >
> > > > > > > > > > > > wait_event(rnp->exp_wq[rcu_seq_ctr(s) & 0x3],
> > > > > > > > > > > > sync_exp_work_done(rsp, s));
> > > > > > > > > > > > mutex_unlock(&rsp->exp_mutex);
> > > > > > > > > > >
> > > > > > > > > > > So task1 is the one that initiated the expedited grace period that
> > > > > > > > > > > started when .expedited_sequence was zero, right?
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Yes, right.
> > > > > > > > > >
> > > > > > > > > > > > 5. Next exp GP completes, and sequence number is incremented:
> > > > > > > > > > > >
> > > > > > > > > > > > rcu_exp_wait_wake()
> > > > > > > > > > > > rcu_exp_wait_wake()
> > > > > > > > > > > > rcu_exp_gp_seq_end(rsp) // rsp->expedited_sequence = 0b'200'
> > > > > > > > > > > >
> > > > > > > > > > > > 6. As kworker A uses current expedited_sequence, it wakes up workers
> > > > > > > > > > > > from wrong wait queue index - it should have worken wait queue
> > > > > > > > > > > > corresponding to 0b'100' sequence, but wakes up the ones for
> > > > > > > > > > > > 0b'200' sequence. This results in task at step 1 indefinitely blocked.
> > > > > > > > > > > >
> > > > > > > > > > > > rcu_exp_wait_wake()
> > > > > > > > > > > > wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rsp->expedited_sequence) & 0x3]);
> > > > > > > > > > >
> > > > > > > > > > > So the issue is that the next expedited RCU grace period might
> > > > > > > > > > > have completed before the completion of the wakeups for the previous
> > > > > > > > > > > expedited RCU grace period, correct? Then expedited grace periods have
> > > > > > > > > >
> > > > > > > > > > Yes. Actually from the ftraces, I saw that next expedited RCU grace
> > > > > > > > > > period completed while kworker A was in D state, while waiting for
> > > > > > > > > > exp_wake_mutex. This led to kworker A using sequence 2 (instead of 1) for
> > > > > > > > > > its wake_up_all() call; so, task (point 1) was never woken up, as it was
> > > > > > > > > > waiting on wq index 1.
> > > > > > > > > >
> > > > > > > > > > > to have stopped to prevent any future wakeup from happening, correct?
> > > > > > > > > > > (Which would make it harder for rcutorture to trigger this, though it
> > > > > > > > > > > really does have code that attempts to trigger this sort of thing.)
> > > > > > > > > > >
> > > > > > > > > > > Is this theoretical in nature, or have you actually triggered it?
> > > > > > > > > > > If actually triggered, what did you do to make this happen?
> > > > > > > > > >
> > > > > > > > > > This issue, we had seen previously - 1 instance in May 2018 (on 4.9 kernel),
> > > > > > > > > > another instance in Nov 2018 (on 4.14 kernel), in our customer reported
> > > > > > > > > > issues. Both instances were in downstream drivers and we didn't have RCU
> > > > > > > > > > traces. Now 2 days back, it was reported on 4.19 kernel, with RCU traces
> > > > > > > > > > enabled, where it was observed in suspend scenario, where we are observing
> > > > > > > > > > "DPM device timeout" [1], as scsi device is stuck in
> > > > > > > > > > _synchronize_rcu_expedited().
> > > > > > > > > >
> > > > > > > > > > schedule+0x70/0x90
> > > > > > > > > > _synchronize_rcu_expedited+0x590/0x5f8
> > > > > > > > > > synchronize_rcu+0x50/0xa0
> > > > > > > > > > scsi_device_quiesce+0x50/0x120
> > > > > > > > > > scsi_bus_suspend+0x70/0xe8
> > > > > > > > > > dpm_run_callback+0x148/0x388
> > > > > > > > > > __device_suspend+0x430/0x8a8
> > > > > > > > > >
> > > > > > > > > > [1]
> > > > > > > > > > https://github.com/torvalds/linux/blob/master/drivers/base/power/main.c#L489
> > > > > > > > > >
> > > > > > > > > > > What have you done to test the change?
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > I have given this for testing; will share the results . Current analysis
> > > > > > > > > > and patch is based on going through ftrace and code review.
> > > > > > > > >
> > > > > > > > > OK, very good. Please include the failure information in the changelog
> > > > > > > > > of the next version of this patch.
> > > > > >
> > > > > > Done.
> > > > > >
> > > > > > > > >
> > > > > > > > > I prefer your original patch, that just uses "s", over the one below
> > > > > > > > > that moves the rcu_exp_gp_seq_end(). The big advantage of your original
> > > > > > > > > patch is that it allow more concurrency between a consecutive pair of
> > > > > > > > > expedited RCU grace periods. Plus it would not be easy to convince
> > > > > > > > > myself that moving rcu_exp_gp_seq_end() down is safe, so your original
> > > > > > > > > is also conceptually simpler with a more manageable state space.
> > > > > >
> > > > > > The reason for highlighting the alternate approach of doing gp end inside
> > > > > > exp_wake_mutex is the requirement of 3 wqs. Now, this is a theoretical case;
> > > > > > please correct me if I am wrong here:
> > > > > >
> > > > > > 1. task0 holds exp_wake_mutex, and is preempted.
> > > > >
> > > > > Presumably after it has awakened the kthread that initiated the prior
> > > > > expedited grace period (the one with seq number = -4).
> > > > >
> > > > > > 2. task1 initiates new GP (current seq number = 0).
> > > > >
> > > > > Yes, this can happen.
> > > > >
> > > > > > 3. task1 queues worker kworker1 and schedules out.
> > > > >
> > > > > And thus still holds .exp_mutex, but yes.
> > > > >
> > > > > > 4. kworker1 sets exp GP to 1 and waits on exp_wake_mutex
> > > > >
> > > > > And thus cannot yet have awakened task1.
> > > > >
> > > > > > 5. task1 releases exp mutex, w/o entering waitq.
> > > > >
> > > > > So I do not believe that we can get to #5. What am I missing here?
> > > > >
> > > >
> > > > As mentioned in this patch, task1 could have scheduled out after queuing
> > > > work:
> > > >
> > > > queue_work(rcu_gp_wq, &rew.rew_work)
> > > > wake_up_worker()
> > > > schedule()
> > > >
> > > > kworker1 runs and picks up this queued work, and sets exp GP to 1 and waits
> > > > on exp_wake_mutex.
> > > >
> > > > task1 gets scheduled in and checks sync_exp_work_done(rsp, s), which return
> > > > true and it does not enter wait queue and releases exp_mutex.
> > > >
> > > > wait_event(rnp->exp_wq[rcu_seq_ctr(s) & 0x3],
> > > > sync_exp_work_done(rsp, s));
> > >
> > > Well, I have certainly given enough people a hard time about missing the
> > > didn't-actually-sleep case, so good show on finding one in my code! ;-)
> > >
> > > Which also explains why deferring the rcu_exp_gp_seq_end() is safe:
> > > The .exp_mutex won't be released until after it happens, and the
> > > next manipulation of the sequence number cannot happen until after
> > > .exp_mutex is next acquired.
> > >
> > > Good catch! And keep up the good work!!!
> >
> > And here is the commit corresponding to your earlier patch. Please let
> > me know of any needed adjustments.
> >
> > Thanx, Paul
> >
> > ------------------------------------------------------------------------
> >
> > commit 3ec440b52831eea172061c5db3d2990b22904863
> > Author: Neeraj Upadhyay <neeraju@xxxxxxxxxxxxxx>
> > Date: Tue Nov 19 11:50:52 2019 -0800
> >
> > rcu: Allow only one expedited GP to run concurrently with wakeups
> > The current expedited RCU grace-period code expects that a task
> > requesting an expedited grace period cannot awaken until that grace
> > period has reached the wakeup phase. However, it is possible for a long
> > preemption to result in the waiting task never sleeping. For example,
> > consider the following sequence of events:
> > 1. Task A starts an expedited grace period by invoking
> > synchronize_rcu_expedited(). It proceeds normally up to the
> > wait_event() near the end of that function, and is then preempted
> > (or interrupted or whatever).
> > 2. The expedited grace period completes, and a kworker task starts
> > the awaken phase, having incremented the counter and acquired
> > the rcu_state structure's .exp_wake_mutex. This kworker task
> > is then preempted or interrupted or whatever.
> > 3. Task A resumes and enters wait_event(), which notes that the
> > expedited grace period has completed, and thus doesn't sleep.
> > 4. Task B starts an expedited grace period exactly as did Task A,
> > complete with the preemption (or whatever delay) just before
> > the call to wait_event().
> > 5. The expedited grace period completes, and another kworker
> > task starts the awaken phase, having incremented the counter.
> > However, it blocks when attempting to acquire the rcu_state
> > structure's .exp_wake_mutex because step 2's kworker task has
> > not yet released it.
> > 6. Steps 4 and 5 repeat, resulting in overflow of the rcu_node
> > structure's ->exp_wq[] array.
> > In theory, this is harmless. Tasks waiting on the various ->exp_wq[]
> > array will just be spuriously awakened, but they will just sleep again
> > on noting that the rcu_state structure's ->expedited_sequence value has
> > not advanced far enough.
> > In practice, this wastes CPU time and is an accident waiting to happen.
> > This commit therefore moves the rcu_exp_gp_seq_end() call that officially
> > ends the expedited grace period (along with associate tracing) until
> > after the ->exp_wake_mutex has been acquired. This prevents Task A from
> > awakening prematurely, thus preventing more than one expedited grace
> > period from being in flight during a previous expedited grace period's
> > wakeup phase.
>
> I am not sure, if a "fixes" tag is required for it.

If you have a suggested commit, I would be happy to add it.

> > Signed-off-by: Neeraj Upadhyay <neeraju@xxxxxxxxxxxxxx>
> > [ paulmck: Added updated comment. ]
> > Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
> >
> > diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
> > index 4433d00a..8840729 100644
> > --- a/kernel/rcu/tree_exp.h
> > +++ b/kernel/rcu/tree_exp.h
> > @@ -539,14 +539,13 @@ static void rcu_exp_wait_wake(unsigned long s)
> > struct rcu_node *rnp;
> > synchronize_sched_expedited_wait();
> > - rcu_exp_gp_seq_end();
> > - trace_rcu_exp_grace_period(rcu_state.name, s, TPS("end"));
> > - /*
> > - * Switch over to wakeup mode, allowing the next GP, but -only- the
> > - * next GP, to proceed.
> > - */
> > + // Switch over to wakeup mode, allowing the next GP to proceed.
> > + // End the previous grace period only after acquiring the mutex
> > + // to ensure that only one GP runs concurrently with wakeups.
>
> Should comment style be changed to below?
>
> /* Switch over to wakeup mode, allowing the next GP to proceed.
> * End the previous grace period only after acquiring the mutex
> * to ensure that only one GP runs concurrently with wakeups.
> */

No. "//" is acceptable comment format, aside from docbook headers.
The "//" approach saves three characters per line compared to "/* ... */"
single-line comments and a line compared to the style you show above.

So yes, some maintainers prefer the style you show, but not me.

Thanx, Paul

> > mutex_lock(&rcu_state.exp_wake_mutex);
> > + rcu_exp_gp_seq_end();
> > + trace_rcu_exp_grace_period(rcu_state.name, s, TPS("end"));
> > rcu_for_each_node_breadth_first(rnp) {
> > if (ULONG_CMP_LT(READ_ONCE(rnp->exp_seq_rq), s)) {
> >
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of
> the Code Aurora Forum, hosted by The Linux Foundation