[PATCH v2 1/2] dt-bindings: usb: add "hub,interval" property

[Ikjoon Jang]

Add "hub,interval" property to usb-device, so a hard wired hub device
can have different bInterval from its endpoint.

When we know reducing autosuspend delay for built-in HIDs is better for
power saving, we can reduce it to the optimal value. But if a parent hub
has a long bInterval, mouse lags a lot from more frequent autosuspend.
So this enables overriding bInterval for a hard wired hub device only
when we know that reduces the power consumption.

Signed-off-by: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/usb-device.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 036be172b1ae..44bef2ff2704 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -66,6 +66,9 @@ Required properties for host-controller nodes with device nodes:
 - #size-cells: shall be 0
 
 
+Optional properties for hub nodes
+- hub,interval: bInterval of status change endpoint. The range is 1-255.
+
 Example:
 
 &usb1 {	/* host controller */
@@ -75,6 +78,7 @@ Example:
 	hub@1 {		/* hub connected to port 1 */
 		compatible = "usb5e3,608";
 		reg = <1>;
+		hub,interval = <8>;
 	};
 
 	device@2 {	/* device connected to port 2 */
-- 
2.24.0.432.g9d3f5f5b63-goog