[PATCH 3/3] crypto: atmel-tdes - Retire dma_request_slave_channel_compat()
From: Peter Ujfalusi
Date: Thu Nov 21 2019 - 02:27:52 EST
The driver no longer boots in legacy mode, only via DT. This makes the
dma_request_slave_channel_compat() redundant.
If ever the filter function would be executed it will return false as the
dma_slave is not really initialized.
Switch to use dma_request_chan() which would allow legacy boot if ever
needed again by configuring dma_slave_map for the DMA driver.
At the same time skip allocating memory for dma_slave as it is not used
anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
drivers/crypto/atmel-tdes.c | 47 ++++++++++---------------------------
1 file changed, 13 insertions(+), 34 deletions(-)
diff --git a/drivers/crypto/atmel-tdes.c b/drivers/crypto/atmel-tdes.c
index 1a6c86ae6148..44fdc7456769 100644
--- a/drivers/crypto/atmel-tdes.c
+++ b/drivers/crypto/atmel-tdes.c
@@ -702,31 +702,17 @@ static int atmel_tdes_crypt(struct ablkcipher_request *req, unsigned long mode)
return atmel_tdes_handle_queue(ctx->dd, req);
}
-static bool atmel_tdes_filter(struct dma_chan *chan, void *slave)
-{
- struct at_dma_slave *sl = slave;
-
- if (sl && sl->dma_dev == chan->device->dev) {
- chan->private = sl;
- return true;
- } else {
- return false;
- }
-}
-
static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
struct crypto_platform_data *pdata)
{
- dma_cap_mask_t mask;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
+ int ret;
/* Try to grab 2 DMA channels */
- dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask,
- atmel_tdes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
- if (!dd->dma_lch_in.chan)
+ dd->dma_lch_in.chan = dma_request_chan(dd->dev, "tx");
+ if (IS_ERR(dd->dma_lch_in.chan)) {
+ ret = PTR_ERR(dd->dma_lch_in.chan);
goto err_dma_in;
+ }
dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
@@ -739,10 +725,11 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
DMA_SLAVE_BUSWIDTH_4_BYTES;
dd->dma_lch_in.dma_conf.device_fc = false;
- dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask,
- atmel_tdes_filter, &pdata->dma_slave->txdata, dd->dev, "rx");
- if (!dd->dma_lch_out.chan)
+ dd->dma_lch_out.chan = dma_request_chan(dd->dev, "rx");
+ if (IS_ERR(dd->dma_lch_out.chan)) {
+ ret = PTR_ERR(dd->dma_lch_out.chan);
goto err_dma_out;
+ }
dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
@@ -760,8 +747,9 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
err_dma_out:
dma_release_channel(dd->dma_lch_in.chan);
err_dma_in:
- dev_warn(dd->dev, "no DMA channel available\n");
- return -ENODEV;
+ if (ret != -EPROBE_DEFER)
+ dev_warn(dd->dev, "no DMA channel available\n");
+ return ret;
}
static void atmel_tdes_dma_cleanup(struct atmel_tdes_dev *dd)
@@ -1212,12 +1200,6 @@ static struct crypto_platform_data *atmel_tdes_of_init(struct platform_device *p
if (!pdata)
return ERR_PTR(-ENOMEM);
- pdata->dma_slave = devm_kzalloc(&pdev->dev,
- sizeof(*(pdata->dma_slave)),
- GFP_KERNEL);
- if (!pdata->dma_slave)
- return ERR_PTR(-ENOMEM);
-
return pdata;
}
#else /* CONFIG_OF */
@@ -1311,10 +1293,7 @@ static int atmel_tdes_probe(struct platform_device *pdev)
goto err_pdata;
}
}
- if (!pdata->dma_slave) {
- err = -ENXIO;
- goto err_pdata;
- }
+
err = atmel_tdes_dma_init(tdes_dd, pdata);
if (err)
goto err_tdes_dma;
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki