Re: [PATCH v2] ARM: dts: am5729: beaglebone-ai: adding device tree

[Grygorii Strashko]

On 21/11/2019 00:05, Caleb Robey wrote:
> From: Jason Kridner <jdk@xxxxxx>
>
> BeagleBoard.org BeagleBone AI is an open source hardware single
> board computer based on the Texas Instruments AM5729 SoC featuring
> dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital
> signal processor (DSP), quad-core embedded vision engine (EVE),
> Arm Cortex-M4 processors, dual programmable realtime unit
> industrial control subsystems and more. The board features 1GB
> DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash,
> 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion
> headers.
>
> For more information, refer to:
> https://beaglebone.ai
>
> This patch introduces the BeagleBone AI device tree.
>
> Note that the device use the "ti,tpd12s016" component which is
> software compatible with "ti,tpd12s015". Thus we only use the
> latter driver.

Ah. thanks. I see my comments resolved here.
no more comments to net part from my side.

> Signed-off-by: Jason Kridner <jdk@xxxxxx>
> Signed-off-by: Caleb Robey <c-robey@xxxxxx>
> Cc: Robert Nelson <robertcnelson@xxxxxxxxx>
>
>
> ---
>
> V2 Changes:
>    - dra7.dtsi was reintroduced and components that are only
>      not present in upstream linux dts were removed.
>
>   arch/arm/boot/dts/Makefile                |   1 +
>   arch/arm/boot/dts/am5729-beagleboneai.dts | 731 ++++++++++++++++++++++
>   arch/arm/boot/dts/dra7.dtsi               |   2 +-
>   3 files changed, 733 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/boot/dts/am5729-beagleboneai.dts

[..]

--
Best regards,
grygorii