[PATCH] usb: gadget: Fix Kconfig indentation

[Krzysztof Kozlowski]

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 drivers/usb/gadget/legacy/Kconfig | 26 +++++++++++++-------------
 drivers/usb/gadget/udc/Kconfig    |  6 +++---
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 38eaa9417b38..119a4e47681f 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -149,21 +149,21 @@ config USB_ETH_RNDIS
 	   is given in comments found in that info file.
 
 config USB_ETH_EEM
-       bool "Ethernet Emulation Model (EEM) support"
-       depends on USB_ETH
+	bool "Ethernet Emulation Model (EEM) support"
+	depends on USB_ETH
 	select USB_LIBCOMPOSITE
 	select USB_F_EEM
-       help
-	 CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
-	 and therefore can be supported by more hardware.  Technically ECM and
-	 EEM are designed for different applications.  The ECM model extends
-	 the network interface to the target (e.g. a USB cable modem), and the
-	 EEM model is for mobile devices to communicate with hosts using
-	 ethernet over USB.  For Linux gadgets, however, the interface with
-	 the host is the same (a usbX device), so the differences are minimal.
-
-	 If you say "y" here, the Ethernet gadget driver will use the EEM
-	 protocol rather than ECM.  If unsure, say "n".
+	help
+	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+	  and therefore can be supported by more hardware.  Technically ECM and
+	  EEM are designed for different applications.  The ECM model extends
+	  the network interface to the target (e.g. a USB cable modem), and the
+	  EEM model is for mobile devices to communicate with hosts using
+	  ethernet over USB.  For Linux gadgets, however, the interface with
+	  the host is the same (a usbX device), so the differences are minimal.
+
+	  If you say "y" here, the Ethernet gadget driver will use the EEM
+	  protocol rather than ECM.  If unsure, say "n".
 
 config USB_G_NCM
 	tristate "Network Control Model (NCM) support"
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index acaec3ae6ad7..ae70ce29d5e4 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -120,9 +120,9 @@ config USB_FOTG210_UDC
 	   dynamically linked module called "fotg210_udc".
 
 config USB_GR_UDC
-       tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
-       depends on HAS_DMA
-       help
+	tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
+	depends on HAS_DMA
+	help
 	  Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
 	  VHDL IP core library.
 
-- 
2.17.1