Re: [PATCH v2 1/3] arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator

[Maxime Ripard]

On Fri, Nov 29, 2019 at 01:39:39PM +0200, Stefan Mavrodiev wrote:
> A64-OLinuXino-eMMC uses 1.8V for eMMC supply. This is done via a triple
> jumper, which sets VCC-PL to either 1.8V or 3.3V. This setting is different
> for boards with and without eMMC.
>
> This is not a big issue for DDR52 mode, however the eMMC will not work in
> HS200/HS400, since these modes explicitly requires 1.8V.
>
> Fixes: 94f68f3a4b2a ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)")
> Cc: stable@xxxxxxxxxxxxxxx # v5.4
> Signed-off-by: Stefan Mavrodiev <stefan@xxxxxxxxxx>

Applied, thanks!
Maxime

Attachment: signature.asc
Description: PGP signature