Re: Issue with imx_get_temp()

From: Marco Felsch
Date: Tue Dec 03 2019 - 05:15:27 EST

Hi Igor,

On 19-12-02 16:45, Igor Plyatov wrote:
> Dear all,
>
> please  look at back-trace below. It happens on Freescale i.MX6 Quad.
>
> Found a few of those during power on/off stress test in the climate chamber:
>
> [ 0.657596] ------------[ cut here ]------------
> [ 0.657626] WARNING: CPU: 3 PID: 150 at /home/geosig/development/oe-core-toradex-cr7/build/tmp-glibc/work-shared/cr7/kernel-source/kernel/irq/chip.c:242 __irq_startup+0x94/0xa8
> [ 0.657630] Modules linked in:
> [ 0.657643] CPU: 3 PID: 150 Comm: kworker/3:1 Not tainted 5.1.1 #1
> [ 0.657648] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> [ 0.657660] Workqueue: events deferred_probe_work_func
> [ 0.657691] [<8011005c>] (unwind_backtrace) from [<8010b8c8>] (show_stack+0x10/0x14)
> [ 0.657709] [<8010b8c8>] (show_stack) from [<80857b04>] (dump_stack+0x88/0x9c)
> [ 0.657727] [<80857b04>] (dump_stack) from [<8011f308>] (__warn+0xdc/0xf4)
> [ 0.657741] [<8011f308>] (__warn) from [<8011f438>] (warn_slowpath_null+0x40/0x48)
> [ 0.657752] [<8011f438>] (warn_slowpath_null) from [<8016d1a8>] (__irq_startup+0x94/0xa8)
> [ 0.657762] [<8016d1a8>] (__irq_startup) from [<8016d208>] (irq_startup+0x4c/0x130)
> [ 0.657772] [<8016d208>] (irq_startup) from [<8016a6dc>] (enable_irq+0x44/0x90)
> [ 0.657790] [<8016a6dc>] (enable_irq) from [<8066f05c>] (imx_get_temp+0x1bc/0x1fc)
> [ 0.657804] [<8066f05c>] (imx_get_temp) from [<8066cd78>] (thermal_zone_get_temp+0x48/0x68)
> [ 0.657816] [<8066cd78>] (thermal_zone_get_temp) from [<8066a3e4>] (thermal_zone_device_update.part.3+0x28/0xcc)
> [ 0.657827] [<8066a3e4>] (thermal_zone_device_update.part.3) from [<8066afc4>] (thermal_zone_device_register+0x4ac/0x5ec)
> [ 0.657837] [<8066afc4>] (thermal_zone_device_register) from [<8066f580>] (imx_thermal_probe+0x3a8/0x61c)
> [ 0.657853] [<8066f580>] (imx_thermal_probe) from [<8054ae90>] (platform_drv_probe+0x48/0x98)
> [ 0.657864] [<8054ae90>] (platform_drv_probe) from [<805492a4>] (really_probe+0x228/0x2d0)
> [ 0.657875] [<805492a4>] (really_probe) from [<805494ac>] (driver_probe_device+0x60/0x174)
> [ 0.657892] [<805494ac>] (driver_probe_device) from [<805476f4>] (bus_for_each_drv+0x58/0xb8)
> [ 0.657903] [<805476f4>] (bus_for_each_drv) from [<80549008>] (__device_attach+0xd0/0x13c)
> [ 0.657914] [<80549008>] (__device_attach) from [<80548404>] (bus_probe_device+0x84/0x8c)
> [ 0.657923] [<80548404>] (bus_probe_device) from [<8054889c>] (deferred_probe_work_func+0x64/0x90)
> [ 0.657938] [<8054889c>] (deferred_probe_work_func) from [<80136fd0>] (process_one_work+0x204/0x420)
> [ 0.657952] [<80136fd0>] (process_one_work) from [<80137ddc>] (worker_thread+0x44/0x5bc)
> [ 0.657966] [<80137ddc>] (worker_thread) from [<8013cab0>] (kthread+0x144/0x14c)
> [ 0.657978] [<8013cab0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c)
> [ 0.657984] Exception stack(0xd0ae1fb0 to 0xd0ae1ff8)
> [ 0.657992] 1fa0: 00000000 00000000 00000000 00000000
> [ 0.658002] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 0.658010] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 0.658016] ---[ end trace 6bb553a60c0886bd ]---
>
> Can somebody recommend, how to debug/resolve this issue?

Mh.. it seems that the irq gets enabled before a irq-handler is
registered. As your backlog shows the thermal_zone_device_register()
triggers a imx_get_temp() and during boot the irq_enabled is false and
it seems that your temperature is below the alarm_temp. So in such a
case the enable_irq() is executed. I don't know what happens if we
enable a irq without a irq-handler.

Regards,
Marco

> Best wishes.
> --
> Igor Plyatov
>
>
>

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |