RE: [PATCH] ASoC: da7219: remove SRM lock check retry
From: Lu, Brent
Date: Tue Dec 03 2019 - 10:31:48 EST
>
> Yes, that's right. I have put in a request with our HW team to again clarify
> timings, but still awaiting feedback.
>
> The driver already warns via the kernel logs when SRM lock fails as follows:
>
> dev_warn(component->dev, "SRM failed to lock\n");
>
> What else do you think is needed?
>
Hi Adam,
Let's say that the SRM locks in the second loop. The 50ms delay was applied
but there is no kernel log message about it because the value of srm_lock is
already true when exiting the loop. If we can print every SRM lock fail before
msleep() call, it would be a helpful for people resolving timing issues like Cold
latency.
do {
pll_status = snd_soc_component_read32(component, DA7219_PLL_SRM_STS);
if (pll_status & DA7219_PLL_SRM_STS_SRM_LOCK) {
break;
} else {
++i;
dev_warn(component->dev, "SRM failed to lock, retry in 50ms\n");
msleep(50);
}
} while (i < DA7219_SRM_CHECK_RETRIES);
Regards,
Brent