Re: [PATCH v1 15/17] dt-bindings: tegra186-pmc: Add Tegra PMC clock bindings

[Rob Herring]

On Mon, Nov 18, 2019 at 10:50:32PM -0800, Sowjanya Komatineni wrote:
> Document clock bindings for pmc clocks clk_out_1, clk_out_2 and clk_out_3.
> These clocks are part of Tegra PMC block and pmc node is the provider for
> these clocks.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
>  .../bindings/arm/tegra/nvidia,tegra186-pmc.txt     | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
> index 2d89cdc39eb0..4576de92e4cc 100644
> --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
> +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
> @@ -12,6 +12,10 @@ Required properties:
>    - "aotag"
>    - "scratch"
>    - "misc" (Only for Tegra194)
> +- #clock-cells : Should be 1 for Tegra30 and higher.
> +  In clock consumers, this cell represents the PMC clock ID.
> +  The assignments may be found in header file
> +  <dt-bindings/soc/tegra-pmc.h>.

Kind of strange the header is shared, but the binding doc is not.

>  
>  Optional properties:
>  - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
> @@ -130,3 +134,43 @@ Pinctrl client example:
>  		pinctrl-1 = <&hdmi_on>;
>  		pinctrl-names = "hdmi-on", "hdmi-off";
>  	};
> +
> +== Clock Control ==
> +
> +Tegra PMC has 3 clocks clk_1, clk_2 and clk_3. Each of these clocks has
> +source selection and enable/disable gate.
> +Parent/source for these clocks can be either of clk_m, clk_m_div2, clk_m_div4,
> +or extern clock from Tegra CAR module.
> +
> +Clock configuration example:
> +	pmc: pmc@7000e400 {
> +		compatible = "nvidia,tegra186-pmc";
> +		reg = <0 0x0c360000 0 0x10000>,
> +		      <0 0x0c370000 0 0x10000>,
> +		      <0 0x0c380000 0 0x10000>,
> +		      <0 0x0c390000 0 0x10000>;
> +		reg-names = "pmc", "wake", "aotag", "scratch";
> +		...
> +		#clock-cells = <1>;
> +		...

Once converted to schema, the examples have to compile and this won't. 
They also have to be complete enough to pass validation checks.

> +	};
> +
> +Clock consumer example:
> +	host1x@50000000 {
> +		...
> +		vi@54080000 {
> +		...
> +		assigned-clocks = <&pmc TEGRA_PMC_CLK_OUT_3_MUX>;
> +		assigned-clock-parents = <&tegra_car TEGRA210_CLK_EXTERN3>;

Indentation is wrong.

> +		};
> +		...
> +	};
> +	...
> +	i2c@7000c500 {
> +		cam_sensor {
> +		...
> +		clocks = <&pmc TEGRA_PMC_CLK_OUT_3>;
> +		clock-names = "mclk";

Same here.

> +		...
> +		};
> +	};
> -- 
> 2.7.4
>