[Patch v2 2/5] arm64: dts: ls1046a: Add QSPI node for ls1046afrwy

[Ashish Kumar]

From: Kuldeep Singh <kuldeep.singh@xxxxxxx>

This board has a single 64MB mt25qu512a flash.
QUAD I/O read and single I/O write is tested.

Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxx>
Signed-off-by: Ashish Kumar <Ashish.Kumar@xxxxxxx>
---
v2: 
Rebased to top

 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index 3595be0f2527..db3d303093f6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -112,6 +112,20 @@
 
 };
 
+&qspi {
+	status = "okay";
+
+	mt25qu512a0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
 #include "fsl-ls1046-post.dtsi"
 
 &fman0 {
-- 
2.17.1