Re: [PATCH 1/2] dt-bindings: hwmon/pmbus: Add UCD90320 power sequencer

[Jim Wright]

Hi Rob,

On 12/4/2019 4:59 PM, Rob Herring wrote:
> On Fri, Nov 22, 2019 at 04:25:41PM -0600, Jim Wright wrote:
> > From: Jim Wright <jlwright@xxxxxxxxxx>
> >
> > Document the UCD90320 device tree binding.
> >
> > Signed-off-by: Jim Wright <jlwright@xxxxxxxxxx>
> > ---
> >   .../devicetree/bindings/hwmon/pmbus/ucd90320.txt    | 13 +++++++++++++
> >   1 file changed, 13 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> Can you make this a schema. See
> Documentation/devicetree/writing-schema.rst.
Ok, will do and submit patch set revision.
Thanks for the review,
Jim Wright
> > diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> > new file mode 100644
> > index 000000000000..e1c1057c6292
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> > @@ -0,0 +1,13 @@
> > +UCD90320 power sequencer
> > +-------------------------
> > +
> > +Requires node properties:
> > +- compatible : "ti,ucd90320"
> > +- reg : the I2C address of the device. This is 0x11, 0x13, 0x17, 0x31, 0x33,
> > +        0x37, 0x71, 0x73, or 0x77.
> > +
> > +Example:
> > +	ucd90320@11 {
> > +		compatible = "ti,ucd90320";
> > +		reg = <0x11>;
> > +	};
> > --
> > 2.17.1