Re: [PATCH 5/7] arm64: dts: imx8mm: add GPC power domains
From: Adam Ford
Date: Wed Dec 04 2019 - 22:15:52 EST
On Wed, Dec 4, 2019 at 8:37 PM Jacky Bai <ping.bai@xxxxxxx> wrote:
>
> > -----Original Message-----
> > From: Adam Ford <aford173@xxxxxxxxx>
> > Sent: Thursday, December 5, 2019 10:19 AM
> > To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: Adam Ford <aford173@xxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>;
> > Mark Rutland <mark.rutland@xxxxxxx>; Shawn Guo
> > <shawnguo@xxxxxxxxxx>; Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>;
> > Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>; Fabio Estevam
> > <festevam@xxxxxxxxx>; dl-linux-imx <linux-imx@xxxxxxx>;
> > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> > Subject: [PATCH 5/7] arm64: dts: imx8mm: add GPC power domains
> >
> > There is a power domain controller on the i.XM8M Mini used for handling
> > interrupts and controlling certain peripherals like USB OTG and PCIe, which
> > are currently unavailable.
> >
> > This patch enables support the controller itself to the help facilitate enabling
> > additional peripherals.
> >
> > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 82
> > ++++++++++++++++++++++-
> > 1 file changed, 81 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index 23c8fad7932b..d05c5b617a4d 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -4,6 +4,7 @@
> > */
> >
> > #include <dt-bindings/clock/imx8mm-clock.h>
> > +#include <dt-bindings/power/imx8m-power.h>
> > #include <dt-bindings/gpio/gpio.h>
> > #include <dt-bindings/input/input.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > @@ -13,7 +14,7 @@
> >
> > / {
> > compatible = "fsl,imx8mm";
> > - interrupt-parent = <&gic>;
> > + interrupt-parent = <&gpc>;
>
> NACK, for imx8mm, imx8mn & future i.MX8M SOC, we don't treat GPC as interrupt controller in linux anymore.
> Above change will break the low power mode support(suspend/resume)
What makes it different than the i.MX8MQ? The I basically copied this
from the i.MX8MQ and updated the bit locations and tried to leave
everything else the same.
I'm OK with removing the interrupt controller stuff, but if that's
required, I'd like to understand why it's still in the i.MX8Q.
adam
>
> BR
> Jacky Bai
>
> > #address-cells = <2>;
> > #size-cells = <2>;
> >
> > @@ -495,6 +496,85 @@
> > interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > #reset-cells = <1>;
> > };
> > +
> > + gpc: gpc@303a0000 {
> > + compatible = "fsl,imx8mm-gpc";
> > + reg = <0x303a0000 0x10000>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > +
> > + pgc {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + pgc_mipi: power-domain@0 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_MIPI>;
> > + };
> > +
> > + pgc_pcie: power-domain@1 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_PCIE>;
> > + };
> > +
> > + pgc_otg1: power-domain@2 {
> > + #power-domain-cells = <0>;
> > + reg =
> > <IMX8MM_POWER_DOMAIN_USB_OTG1>;
> > + };
> > +
> > + pgc_otg2: power-domain@3 {
> > + #power-domain-cells = <0>;
> > + reg =
> > <IMX8MM_POWER_DOMAIN_USB_OTG2>;
> > + };
> > +
> > + pgc_ddr1: power-domain@4 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_DDR1>;
> > + };
> > +
> > + pgc_gpu2d: power-domain@5 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_GPU2D>;
> > + };
> > +
> > + pgc_gpu: power-domain@6 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_GPU>;
> > + };
> > +
> > + pgc_vpu: power-domain@7 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_VPU>;
> > + };
> > +
> > + pgc_gpu3d: power-domain@8 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_GPU3D>;
> > + };
> > +
> > + pgc_disp: power-domain@9 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_DOMAIN_DISP>;
> > + };
> > +
> > + pgc_vpu_g1: power-domain@a {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_VPU_G1>;
> > + };
> > +
> > + pgc_vpu_g2: power-domain@b {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_VPU_G2>;
> > + };
> > +
> > + pgc_vpu_h1: power-domain@c {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MM_POWER_VPU_H1>;
> > + };
> > + };
> > + };
> > };
> >
> > aips2: bus@30400000 {
> > --
> > 2.20.1
>