Re: [PATCH 1/2] dt-bindings: clock: document the fsl-sai driver

[Rob Herring]

On Sat, Nov 23, 2019 at 12:56:21AM +0100, Michael Walle wrote:
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> ---
>  .../bindings/clock/fsl,sai-clock.yaml         | 48 +++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
> new file mode 100644
> index 000000000000..7116c8bc24d3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings please: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/clock/fsl,sai-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale SAI bitclock-as-a-clock binding
> +
> +maintainers:
> +  - Michael Walle <michael@xxxxxxxx>
> +
> +description: |
> +  It is possible to use the BCLK pin of a SAI module as a generic clock
> +  output. Some SoC are very constrained in their pin multiplexer
> +  configuration. Eg. pins can only be changed groups. For example, on the
> +  LS1028A SoC you can only enable SAIs in pairs. If you use only one SAI,
> +  the second pins are wasted. Using this binding it is possible to use the
> +  clock of the second SAI as a MCLK clock for an audio codec, for example.
> +
> +  This is a composite of a gated clock and a divider clock.
> +
> +properties:
> +  compatible:
> +    const: fsl,vf610-sai-clock
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  '#clock-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - '#clock-cells'
> +

Add:

additionalProperties: false

> +examples:
> +  - |
> +    mclk: clock-mclk@f130080 {
> +        compatible = "fsl,vf610-sai-clock";
> +        reg = <0x0 0xf130080 0x0 0x80>;

Examples are built now and this will fail because the default 
#address-cells and #size-cells are 1.

> +        #clock-cells = <0>;
> +        clocks = <&parentclk>;
> +    };
> -- 
> 2.20.1
>