[PATCH] tty: serial: amba-pl011: remove set but unused variable

[Xiongfeng Wang]

Fix the following warning:
drivers/tty/serial/amba-pl011.c: In function check_apply_cts_event_workaround:
drivers/tty/serial/amba-pl011.c:1461:15: warning: variable dummy_read set but not used [-Wunused-but-set-variable]

The data read is useless and can be dropped.

Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@xxxxxxxxxx>
---
 drivers/tty/serial/amba-pl011.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4b28134..c5e9475 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1452,8 +1452,6 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 
 static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 {
-	unsigned int dummy_read;
-
 	if (!uap->vendor->cts_event_workaround)
 		return;
 
@@ -1465,8 +1463,8 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 	 * single apb access will incur 2 pclk(133.12Mhz) delay,
 	 * so add 2 dummy reads
 	 */
-	dummy_read = pl011_read(uap, REG_ICR);
-	dummy_read = pl011_read(uap, REG_ICR);
+	pl011_read(uap, REG_ICR);
+	pl011_read(uap, REG_ICR);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
-- 
1.7.12.4